LM3485

現行

4.5-35V、磁滯非同步 PFET 降壓控制器

立即訂購

產品規格表

document-pdfAcrobat LM3485 Hysteretic PFET Buck Controller datasheet (Rev. H) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但引腳輸出與所比較的產品不同

LM25148

現行

具有超低 IQ 的 42-V 同步降壓 DC/DC 控制器 Improved EMI performance with QFN package and dual random spread spectrum.

LM3485

現行

產品規格表

立即訂購

產品詳細資料

Vin (min) (V)

4.5

Vin (max) (V)

35

Iout (max) (A)

4

Operating temperature range (°C)

-40 to 125

Control mode

Hysteretic

Rating

Catalog

Vout (min) (V)

1.242

Vout (max) (V)

35

Iq (typ) (A)

0.00025

Duty cycle (max) (%)

100

Vin (min) (V)

4.5

Vin (max) (V)

35

Iout (max) (A)

4

Operating temperature range (°C)

-40 to 125

Control mode

Hysteretic

Rating

Catalog

Vout (min) (V)

1.242

Vout (max) (V)

35

Iq (typ) (A)

0.00025

Duty cycle (max) (%)

100

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

Easy-to-Use Control Methodology
No Control-Loop Compensation Required
4.5-V to 35-V Wide Input Range
1.242-V to V_IN Adjustable Output Range
High Efficiency 93%
±1.3% (±2% Over Temp) Internal Reference
100% Duty Cycle
Maximum Operating Frequency > 1 MHz
Current Limit Protection

Easy-to-Use Control Methodology
No Control-Loop Compensation Required
4.5-V to 35-V Wide Input Range
1.242-V to V_IN Adjustable Output Range
High Efficiency 93%
±1.3% (±2% Over Temp) Internal Reference
100% Duty Cycle
Maximum Operating Frequency > 1 MHz
Current Limit Protection

The LM3485 is a high-efficiency PFET switching regulator controller that can be used to quickly and easily develop a small, low-cost, switching buck regulator for a wide range of applications. The hysteretic control architecture provides for simple design without any control-loop stability concerns using a wide variety of external components. The PFET architecture also allows for low component count as well as ultralow dropout, 100% duty cycle operation. Another benefit is high efficiency operation at light loads without an increase in output ripple.

Current limit protection is provided by measuring the voltage across the R_DS(ON) of the PFET, thus eliminating the need for a sense resistor. The cycle-by-cycle current limit can be adjusted with a single resistor, ensuring safe operation over a range of output currents.

The LM3485 is a high-efficiency PFET switching regulator controller that can be used to quickly and easily develop a small, low-cost, switching buck regulator for a wide range of applications. The hysteretic control architecture provides for simple design without any control-loop stability concerns using a wide variety of external components. The PFET architecture also allows for low component count as well as ultralow dropout, 100% duty cycle operation. Another benefit is high efficiency operation at light loads without an increase in output ripple.

Current limit protection is provided by measuring the voltage across the R_DS(ON) of the PFET, thus eliminating the need for a sense resistor. The cycle-by-cycle current limit can be adjusted with a single resistor, ensuring safe operation over a range of output currents.

open-in-new

尋找其它 AC/DC & DC/DC controllers (external FET)

下載觀看有字幕稿的影片影片

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 6

	類型	標題		日期
*	Data sheet	LM3485 Hysteretic PFET Buck Controller datasheet (Rev. H)	PDF \| HTML	2015年 12月 28日
	Analog Design Journal	Control-Mode Quick Reference Guide (Rev. B)	PDF \| HTML	2023年 8月 29日
	Selection guide	Power Management Guide 2018 (Rev. R)		2018年 6月 25日
	Analog Design Journal	Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics		2016年 7月 21日
	EVM User's guide	AN-1227 LM3485 Evaluation Board (Rev. B)		2013年 4月 25日
	EVM User's guide	AN-1392 LM3485 LED Demo Board (Rev. B)		2013年 4月 25日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM3485EVAL — 磁滯 PFET 降壓控制器評估模組

Hysteretic PFET Buck Controller

使用指南: PDF

TI.com 無法提供

開發板

LM3485LED-EVAL — 磁滯 PFET 降壓控制器

The LM3485 LED driver board is a buck regulator derived controlled current source designed to drive high power, high brightness LEDs (HBLEDs) such as the Luxeon™ Emitter at dissipations of 1W to 5W. The board can accept an input voltage ranging from 5V to 30V and can control the output current (...)

使用指南: PDF