首頁 音訊 音訊放大器 耳機放大器
首頁
音訊
音訊放大器
耳機放大器

LM48820

現行

具固定 1.5 V/V 增益的 95-mW，立體聲道類比輸入耳機放大器

立即訂購
產品規格表

LM48820

現行
產品規格表 立即訂購

產品詳細資料

Output power (W) 0.095 Analog supply (min) (V) 1.6 Analog supply voltage (max) (V) 4.5 Load (min) (Ω) 16 PSRR (dB) 80 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control No Shutdown current (ISD) (µA) 0.05 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 2.3
Output power (W) 0.095 Analog supply (min) (V) 1.6 Analog supply voltage (max) (V) 4.5 Load (min) (Ω) 16 PSRR (dB) 80 Rating Catalog Operating temperature range (°C) -40 to 85 Headphone channels Stereo Volume control No Shutdown current (ISD) (µA) 0.05 Architecture Class-AB (ground-centered) Iq per channel (typ) (mA) 2.3
DSBGA (YFR) 14 3.24 mm² 1.8 x 1.8
  • Available in Space Saving 0.4mm Pitch DSBGA Package
  • Fixed Logic Levels
  • Ground Referenced Outputs
  • High PSRR
  • Ultra Low Current Shutdown Mode
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • Soft Start Feature Reduces Start up Transient Current

Key Specifications

  • Improved PSRR at 217Hz: 80dB (typ)
  • Power Output at VDD = 3V, RL = 16Ω, THD+N = 1%: 95mW (typ)
  • Shutdown Current: 0.05μA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Wide Operating Voltage Range: 1.6V to 4.5V

All trademarks are the property of their respective owners.

  • Available in Space Saving 0.4mm Pitch DSBGA Package
  • Fixed Logic Levels
  • Ground Referenced Outputs
  • High PSRR
  • Ultra Low Current Shutdown Mode
  • Improved Pop and Click Circuitry Eliminates Noises During Turn-On and Turn-Off Transitions
  • No Output Coupling Capacitors, Snubber Networks, Bootstrap Capacitors, or Gain-Setting Resistors Required
  • Shutdown Either Channel Independently
  • Soft Start Feature Reduces Start up Transient Current

Key Specifications

  • Improved PSRR at 217Hz: 80dB (typ)
  • Power Output at VDD = 3V, RL = 16Ω, THD+N = 1%: 95mW (typ)
  • Shutdown Current: 0.05μA (typ)
  • Internal Fixed Gain: 1.5V/V (typ)
  • Wide Operating Voltage Range: 1.6V to 4.5V

All trademarks are the property of their respective owners.

The LM48820 is a ground referenced, fixed-gain audio power amplifier capable of delivering 95mW of continuous average power into a 16Ω single-ended load, with less than 1% THD+N from a 3V power supply.

The LM48820 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal number of external components. The LM48820 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other portable applications.

The LM48820 features a low-power consumption shutdown mode selectable for each channel and a soft start function that reduces start-up current transients. Additionally, the LM48820 features an internal thermal shutdown protection mechanism.

The LM48820 contains advanced pop and click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM48820 has an internal fixed gain of 1.5V/V.

The LM48820 is a ground referenced, fixed-gain audio power amplifier capable of delivering 95mW of continuous average power into a 16Ω single-ended load, with less than 1% THD+N from a 3V power supply.

The LM48820 features a new circuit technology that utilizes a charge pump to generate a negative reference voltage. This allows the outputs to be biased about ground, thereby eliminating output-coupling capacitors typically used with normal single-ended loads.

Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal number of external components. The LM48820 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other portable applications.

The LM48820 features a low-power consumption shutdown mode selectable for each channel and a soft start function that reduces start-up current transients. Additionally, the LM48820 features an internal thermal shutdown protection mechanism.

The LM48820 contains advanced pop and click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.

The LM48820 has an internal fixed gain of 1.5V/V.
open-in-new 尋找其它 耳機放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LM48820 Ground-Ref, Ultra Low Noise, Fixed Gain, 95mW Stereo Headphone Amp datasheet (Rev. B) 2013年 5月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 引腳 下載
DSBGA (YFR) 14 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片