首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

LM49153

現行

具無夾式雜訊閘極的 1.35-W、立體聲道類比輸入 AB 類音訊放大器

立即訂購
產品規格表

LM49153

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.35 SNR (dB) 98 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 1.2 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 94 Operating temperature range (°C) -40 to 85
Audio input type Analog Input Architecture Class-D Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 5.5 Power stage supply (min) (V) 2.7 Load (min) (Ω) 8 Output power (W) 1.35 SNR (dB) 98 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 1.2 Control interface I2C Closed/open loop Open Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 5.5 PSRR (dB) 94 Operating temperature range (°C) -40 to 85
DSBGA (YFQ) 25 4.84 mm² 2.2 x 2.2
  • Class G Ground Referenced Headphone Outputs
  • High Efficiency Class D Amplifier with Spread Spectrum
  • No Clip
  • Speaker Protection
  • Noise Gate
  • I2C Volume and Mode Control
  • Advanced Click-and-Pop Suppression
  • Micro-Power Shutdown

Key Specifications

  • Class G Headphone Amplifier,
    HPVDD = 1.8V, RL = 32Ω
    • IDDQHP, 1.2mA (Typ)
    • POUT, THD+N ≤ 1%, 25mW (Typ)
    • HP VOS, 0.5mV (Typ)
  • Mono Class D Speaker Amplifier,
    RL = 8Ω, THD+N < 1%
    • POUT, LSVDD = 5.0V, 1.35W (Typ)
    • POUT, LSVDD = 3.6V, 680mW (Typ)
    • Efficiency 88% (Typ)

All trademarks are the property of their respective owners.

  • Class G Ground Referenced Headphone Outputs
  • High Efficiency Class D Amplifier with Spread Spectrum
  • No Clip
  • Speaker Protection
  • Noise Gate
  • I2C Volume and Mode Control
  • Advanced Click-and-Pop Suppression
  • Micro-Power Shutdown

Key Specifications

  • Class G Headphone Amplifier,
    HPVDD = 1.8V, RL = 32Ω
    • IDDQHP, 1.2mA (Typ)
    • POUT, THD+N ≤ 1%, 25mW (Typ)
    • HP VOS, 0.5mV (Typ)
  • Mono Class D Speaker Amplifier,
    RL = 8Ω, THD+N < 1%
    • POUT, LSVDD = 5.0V, 1.35W (Typ)
    • POUT, LSVDD = 3.6V, 680mW (Typ)
    • Efficiency 88% (Typ)

All trademarks are the property of their respective owners.

The LM49153 is a fully integrated audio subsystem designed for portable handheld applications such as cellular phones. Part of Texas Instruments' PowerWise family of products, the LM49153 combines an earpiece switch, a high efficiency 25mW class G headphone amplifier, and a high efficiency 1.35W class D loudspeaker into a single device.

The headphone amplifiers feature Texas Instruments' class G ground referenced architecture that creates a ground-referenced output with dynamic supply rails for optimum efficiency. The class D amplifier features an ALC (Automatic Level Control) with a noise gate that provides both no-clip and speaker protection.

Mode selection, shutdown control, and volume are controlled through an I2C compatible interface.

Click and pop suppression eliminates audible transients on power-up/down and during shutdown. The LM49153 is available in an ultra-small 25-bump 0.4mm pitch DSBGA package (2.30mm x 2.42mm).

The LM49153 is a fully integrated audio subsystem designed for portable handheld applications such as cellular phones. Part of Texas Instruments' PowerWise family of products, the LM49153 combines an earpiece switch, a high efficiency 25mW class G headphone amplifier, and a high efficiency 1.35W class D loudspeaker into a single device.

The headphone amplifiers feature Texas Instruments' class G ground referenced architecture that creates a ground-referenced output with dynamic supply rails for optimum efficiency. The class D amplifier features an ALC (Automatic Level Control) with a noise gate that provides both no-clip and speaker protection.

Mode selection, shutdown control, and volume are controlled through an I2C compatible interface.

Click and pop suppression eliminates audible transients on power-up/down and during shutdown. The LM49153 is available in an ultra-small 25-bump 0.4mm pitch DSBGA package (2.30mm x 2.42mm).
open-in-new 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet Mono Audio w/Class G Headphone Amp, Class D Spkr Amp, Noise Gate & Spkr Protect datasheet (Rev. C) 2013年 5月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 引腳 下載
DSBGA (YFQ) 25 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片