首頁 電源管理 電源開關 理想二極體/ORing 控制器
首頁
電源管理
電源開關
理想二極體/ORing 控制器

LM5050-2

現行

6-V 至 75-V 400-uA IQ ORing FET 控制器

立即訂購
產品規格表

LM5050-2

現行
產品規格表 立即訂購

產品詳細資料

Vin (min) (V) 6 Vin (max) (V) 75 Number of channels 1 Features FET test, Linear control, Reverse current blocking Iq (typ) (mA) 0.4 Iq (max) (mA) 0.72 FET External single FET IGate source (typ) (µA) 32 IGate source (max) (µA) 45 IGate sink (typ) (mA) 2.8 IGate pulsed (typ) (A) 2.8 Operating temperature range (°C) -40 to 125 VSense reverse (typ) (mV) -41, -28 Design support EVM, Reference Design, Simulation Model Rating Catalog Imax (A) 250 VGS (max) (V) 14.7 Shutdown current (ISD) (mA) (A) 0.1 Device type ORing controller Product type ORing controller
Vin (min) (V) 6 Vin (max) (V) 75 Number of channels 1 Features FET test, Linear control, Reverse current blocking Iq (typ) (mA) 0.4 Iq (max) (mA) 0.72 FET External single FET IGate source (typ) (µA) 32 IGate source (max) (µA) 45 IGate sink (typ) (mA) 2.8 IGate pulsed (typ) (A) 2.8 Operating temperature range (°C) -40 to 125 VSense reverse (typ) (mV) -41, -28 Design support EVM, Reference Design, Simulation Model Rating Catalog Imax (A) 250 VGS (max) (V) 14.7 Shutdown current (ISD) (mA) (A) 0.1 Device type ORing controller Product type ORing controller
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • Wide Operating Input Voltage Range: +6V to +75V
  • +100 Volt Transient Capability
  • Charge Pump Gate Driver for External N-Channel MOSFET
  • MOSFET Diagnostic Test Mode
  • Fast 50ns Response to Current Reversal
  • 2A Peak Gate Turn-off Current
  • Minimum VDS Clamp for Faster Turn-off
  • Package: SOT-6 (Thin SOT23-6)

All trademarks are the property of their respective owners.

  • Wide Operating Input Voltage Range: +6V to +75V
  • +100 Volt Transient Capability
  • Charge Pump Gate Driver for External N-Channel MOSFET
  • MOSFET Diagnostic Test Mode
  • Fast 50ns Response to Current Reversal
  • 2A Peak Gate Turn-off Current
  • Minimum VDS Clamp for Faster Turn-off
  • Package: SOT-6 (Thin SOT23-6)

All trademarks are the property of their respective owners.

The LM5050-2 High Side OR-ing FET Controller operates in conjunction with an external MOSFET as an ideal diode rectifier when connected in series with a power source. This OR-ing controller allows MOSFETs to replace diode rectifiers in power distribution networks thus reducing both power loss and voltage drops.

The LM5050-2 controller provides charge pump gate drive for an external N-Channel MOSFET and a fast response comparator to turn off the FET when current flows in the reverse direction. The LM5050-2 can connect power supplies ranging from +6V to +75V and can withstand transients up to +100V.

The LM5050-2 also provides a FET test diagnostic mode which allows the system controller to test for shorted MOSFETs.

The LM5050-2 High Side OR-ing FET Controller operates in conjunction with an external MOSFET as an ideal diode rectifier when connected in series with a power source. This OR-ing controller allows MOSFETs to replace diode rectifiers in power distribution networks thus reducing both power loss and voltage drops.

The LM5050-2 controller provides charge pump gate drive for an external N-Channel MOSFET and a fast response comparator to turn off the FET when current flows in the reverse direction. The LM5050-2 can connect power supplies ranging from +6V to +75V and can withstand transients up to +100V.

The LM5050-2 also provides a FET test diagnostic mode which allows the system controller to test for shorted MOSFETs.
open-in-new 尋找其它 理想二極體/ORing 控制器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet LM5050-2 High Side OR-ing FET Controller datasheet (Rev. B) 2013年 3月 8日
Application note Basics of Ideal Diodes (Rev. B) PDF | HTML 2021年 10月 5日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
User guide AN-2051 LM5050-2EVAL Evaluation Board (Rev. A) 2013年 5月 6日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM5050MK-2EVAL — 適用於 LM5050-2 的評估板

The LM5050-2 evaluation board is designed to demonstrate the capabilities of the LM5050-2 OR-ing Diode Controller. It is intended for evaluation of the functions of the LM5050-2.

使用指南: PDF
TI.com 無法提供
模擬型號

LM5050 Unencrypted PSPICE Transient Model

SNVM010.ZIP (347 KB) - PSpice Model
下載
模擬型號

LM5050-2 TINA-TI Transient Reference Design

SNVM063.TSC (85 KB) - TINA-TI Reference Design
下載
模擬型號

LM5050-2 TINA-TI Transient Spice Model

SNVM062.ZIP (11 KB) - TINA-TI Spice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

TIDA-00702 — 具有精密電壓、電流和功率限制的 60W 24V 高效率工業電源

The TIDA-00702 is a 60-W, industrial AC-DC power supply designed for use in industrial and instrumentation systems such as process controls, factory automation, and machinery control. This reference design is a Quasi-resonant (QR) flyback converter implemented using the UCC28740 CC-CV flyback (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-00701 — 具有精密電流及功率限制的 100W、24V 高效率高 PF 工業電源

TIDA-00701 is a 100W, 24V, Industrial AC-DC power supply designed for use in Industrial & Instrumentation systems such as process controls, factory automation and machinery control. This reference design has front end Power Factor Correction (PFC) circuit designed using UCC28051 PFC controller, (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010011 — 用於保護繼電器處理器模組的高效電源供應架構參考設計

This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
Design guide: PDF
電路圖: PDF
封裝 引腳 下載
SOT-23-THN (DDC) 6 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片