LM8335
- MIPI RFFE Interface Version 1.10 Compliant
- Supports Output Expansion
- Host Interface Address Select Pin:
- ADR=GND, USID[3:0]=0001
- ADR=VDD, USID[3:0]=1001
- Pin-Configurable Initial State: VIO
- CFG=GND, GPO High-z, with Weak Internal Pull-Down Resistor Enabled; GPO_OUT_DATA is Unmasked
- CFG=VDD, GPO High-z, with Weak Internal Pull-Down Resistor Enabled; GPO_OUT_DATA is Masked
- Three Sources for Chip Reset:
- VIO Input Pin
- POR
- Software-Commanded Reset
Key Specifications
- 1.8 ± 0.15V MIPI RFFE Operation (VIO)
- 1.8 ± 0.15V Core Supply (VDD)
- 1.65 to 3.6V GPO Supply (VDDIO)
- Low Standby and Active Current
- On-Chip Power-On Reset (POR)
- −30 to +85°C Ambient Temperature Range
- 16-Bump DSBGA Package
- 1.965 mm x 1.965 mm x 0.6 mm, 0.5 mm Pitch (Nominal)
All trademarks are the property of their respective owners.
The LM8335 General Purpose Output Expander is a dedicated device to provide flexible and general purpose, host programmable output expansion functions. This device communicates with a host processor through a MIPI® RFFE Interface (Mobile Industry Processor Interface RF Front-End).
Eight general purpose outputs (GPO) can be configured by the host controller as drive high/low/high-z. Weak pull-ups (PU) or weak pull-downs (PD) can be enabled.
Upon power-on, the LM8335 default configuration is for all GPO to be set based on the state of the CFG pin.
After startup, any changes to the default configuration must be sent from the host via the MIPI RFFE host interface..
The LM8335 is available in a 16-bump lead-free DSBGA package of size 1.965 mm x 1.965 mm x 0.6 mm (0.5 mm pitch).
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | LM8335 General-Purpose Output Expander with MIPI RFFE Host Interface datasheet (Rev. B) | 2013年 5月 2日 | |
Application note | Choosing the Correct I2C Device for New Designs | PDF | HTML | 2016年 9月 7日 | |
Application note | Understanding the I2C Bus | PDF | HTML | 2015年 6月 30日 | |
Application note | Maximum Clock Frequency of I2C Bus Using Repeaters | 2015年 5月 15日 | ||
Application note | I2C Bus Pull-Up Resistor Calculation | PDF | HTML | 2015年 2月 13日 | |
User guide | LM8335 Evaluation Module (Rev. A) | 2013年 5月 3日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LM8335EVM — 具有 MIPI RFFE 主機介面的 LM8335 通用輸出擴展器評估模組板
General-Purpose Output Expander with MIPI RFFE Host Interface Evaluation Module - I2C IO Expander
The EVM operates from USB supplied power. This board supports USB to MIPI RFFE communication to support evaluation of the LM8335 MIPI RFFE to General Purpose Output (GPO) expansion.PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 引腳 | 下載 |
---|---|---|
DSBGA (YZR) | 16 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。