首頁 放大器 特殊功能放大器 轉阻放大器
首頁
放大器
特殊功能放大器
轉阻放大器

LMH32404-Q1

現行

具整合式多工的車用四通道差動輸出轉阻放大器

立即訂購
產品規格表

LMH32404-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 4 GBW (typ) (MHz) 350 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 3.45 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 20 Rail-to-rail No Features Integrated TIA BW at Acl (MHz) 350 Operating temperature range (°C) -40 to 125 Rating Automotive
Number of channels 4 GBW (typ) (MHz) 350 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 3.45 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3 Vos (offset voltage at 25°C) (max) (mV) 20 Rail-to-rail No Features Integrated TIA BW at Acl (MHz) 350 Operating temperature range (°C) -40 to 125 Rating Automotive
VQFN (RHF) 28 20 mm² 5 x 4
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Gain: 20 kΩ
  • Performance, CPD = 1 pF:
    • Bandwidth: 350 MHz
    • Input-referred noise: 56 nARMS
    • Rise, fall time: 1.25 ns
  • Quiescent current: 28 mA/channel
  • Standby mode: 10 mA/channel
  • Low power mode: 2.5 mA (4 channels)
  • Channel switching time: 10 ns
  • Integrated ambient light cancellation
  • Integrated 100-mA protection clamp
  • 4 Input channels and 4 differential output channels
  • Integrated multiplexer enables flexible configurability between optical sensor and ADC/TDC
  • Multiple LMH32404s can be combined in parallel to create a wider field-of-view (FoV)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Gain: 20 kΩ
  • Performance, CPD = 1 pF:
    • Bandwidth: 350 MHz
    • Input-referred noise: 56 nARMS
    • Rise, fall time: 1.25 ns
  • Quiescent current: 28 mA/channel
  • Standby mode: 10 mA/channel
  • Low power mode: 2.5 mA (4 channels)
  • Channel switching time: 10 ns
  • Integrated ambient light cancellation
  • Integrated 100-mA protection clamp
  • 4 Input channels and 4 differential output channels
  • Integrated multiplexer enables flexible configurability between optical sensor and ADC/TDC
  • Multiple LMH32404s can be combined in parallel to create a wider field-of-view (FoV)

The LMH32404-Q1 is a quad-channel, single-ended-input to differential-output transimpedance amplifier (TIA) for light detection and ranging (LIDAR) applications and laser distance measurement systems.

The LMH32404-Q1 has an integrated 100-mA clamp on each channel that protects the amplifier and allows the device to recover rapidly from an overloaded input condition. The LMH32404-Q1 also features an integrated ambient light cancellation (ALC) circuit on each channel that can be used instead of AC coupling between the photodiode and the amplifier to save board space and system cost. The ALC loop should be disabled when DC and low frequency content is measured.

Each LMH32404-Q1 channel has integrated switches on the output to disconnect the differential output amplifier from the output pins and put the channel in standby mode. When switching between different channels, the transistion time is only 10 ns. The LMH32404-Q1 can be placed in low-power mode using the EN pin to conserve power when the amplifier is not being used.

.

.

The LMH32404-Q1 is a quad-channel, single-ended-input to differential-output transimpedance amplifier (TIA) for light detection and ranging (LIDAR) applications and laser distance measurement systems.

The LMH32404-Q1 has an integrated 100-mA clamp on each channel that protects the amplifier and allows the device to recover rapidly from an overloaded input condition. The LMH32404-Q1 also features an integrated ambient light cancellation (ALC) circuit on each channel that can be used instead of AC coupling between the photodiode and the amplifier to save board space and system cost. The ALC loop should be disabled when DC and low frequency content is measured.

Each LMH32404-Q1 channel has integrated switches on the output to disconnect the differential output amplifier from the output pins and put the channel in standby mode. When switching between different channels, the transistion time is only 10 ns. The LMH32404-Q1 can be placed in low-power mode using the EN pin to conserve power when the amplifier is not being used.

.

.
open-in-new 尋找其它 轉阻放大器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
LMH32401 現行 可編程增益差動輸出高速轉阻放大器 A single-channel transimpedance amplifier with programable gain for smaller systems requiring different gain options
最新 LMH32401-Q1 現行 車用可編程增益差動輸出高速轉阻放大器 Single channel with programable gain for smaller systems requiring different gain options

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet LMH32404-Q1 Four-Channel, Differential Output, Multiplexed Transimpedance Amplifier With Integrated Clamping and Ambient Light Cancellation datasheet (Rev. A) PDF | HTML 2021年 11月 1日
Application brief Time of Flight and LIDAR - Optical Front End Design (Rev. A) PDF | HTML 2022年 4月 29日
Application note How to Increase the Channel Density of LiDAR Systems with the 4-Channel LMH32404 PDF | HTML 2021年 5月 7日
EVM User's guide LMH32404RHFEVM User's Guide PDF | HTML 2020年 12月 8日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMH32404RHFEVM — 250-MHz、四通道、差分輸出轉阻放大器評估模組

The LMH32404RHFEVM is an evaluation module (EVM) for the LMH32404RHF differential output transimpedance amplifier. The EVM features a transformer to convert the output to a 50-Ω single-ended connection for easy measurement with standard test equipment, and the option to convert to (...)
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

LMH32404-Q1 PSpice Model

SBOMBR0.ZIP (39 KB) - PSpice Model
下載
模擬型號

PSpice Circuit Containing LMH32404 Model

SBOMBK6.ZIP (39 KB) - PSpice Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
封裝 引腳 下載
VQFN (RHF) 28 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片