具可編程延遲和 1% 重設閾值的低電位作動重設 IC

LP3470 不建議用於新設計
此產品將繼續向現有客戶提供。新設計應考量替代產品。
open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
LP3470A 現行 具有可編程延遲和 1% 重設閾值的超低電位作動重設 IC This device features improvements including lower IQ (0.3 μA), wider input voltage (10 V) and wider temperature range (-40°C to +125°C).

產品詳細資料

Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.63, 2.75, 2.83, 2.93, 3.08, 3.65, 4, 4.38, 4.63, 5.48 Reset threshold accuracy (%) 1 Iq (typ) (mA) 0.016 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 0.5 Supply voltage (max) (V) 5 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 2.63, 2.75, 2.83, 2.93, 3.08, 3.65, 4, 4.38, 4.63, 5.48 Reset threshold accuracy (%) 1 Iq (typ) (mA) 0.016 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 0.5 Supply voltage (max) (V) 5 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • 5-Pin SOT-23 Package
  • Open-Drain Reset Output
  • Programmable Reset Time-Out Period Using an
    External Capacitor
  • Immune to Short VCC Transients
  • ±1% Reset Threshold Accuracy Over
    Temperature
  • Low Quiescent Current (16 µA typical)
  • Reset Valid Down to VCC = 0.5 V
  • 5-Pin SOT-23 Package
  • Open-Drain Reset Output
  • Programmable Reset Time-Out Period Using an
    External Capacitor
  • Immune to Short VCC Transients
  • ±1% Reset Threshold Accuracy Over
    Temperature
  • Low Quiescent Current (16 µA typical)
  • Reset Valid Down to VCC = 0.5 V

The LP3470 device is a micropower voltage supervisory circuit designed to monitor voltages within 1% of reset threshold over temperature. It provides maximum adjustability for power-on-reset (POR) and supervisory functions.

The LP3470 asserts a reset signal whenever the VCC supply voltage falls below a reset threshold. The reset time-out period is adjustable using an external capacitor. Reset remains asserted for an interval (programmed by an external capacitor) after VCC has risen above the threshold voltage.

For information on available reset threshold voltage options, see Mechanical, Packaging, and Orderable Information.

The LP3470 device is a micropower voltage supervisory circuit designed to monitor voltages within 1% of reset threshold over temperature. It provides maximum adjustability for power-on-reset (POR) and supervisory functions.

The LP3470 asserts a reset signal whenever the VCC supply voltage falls below a reset threshold. The reset time-out period is adjustable using an external capacitor. Reset remains asserted for an interval (programmed by an external capacitor) after VCC has risen above the threshold voltage.

For information on available reset threshold voltage options, see Mechanical, Packaging, and Orderable Information.

下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet LP3470 Voltage Supervisor With Programmable Delay and 1% Reset Threshold datasheet (Rev. G) PDF | HTML 2016年 4月 27日

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點