PCMD3180-Q1
- 8-channel PDM microphones simultaneous conversion
- PDM input to TDM or I2S output converter performance:
- 127dB dynamic range (DR) with high performance 5th order PDM input
- 117dB dynamic range (DR) with high performance 4th order PDM input
- Channel summing mode, DR performance with high performance 4th order PDM input:
- 120dB, 2-channel summing
- 123dB, 4-channel summing
- Programmable PDM clock output:
- 768kHz to 6.144MHz
- Programmable output sample rate (fS):
- 8kHz to 768kHz
- Programmable channel settings:
- Digital volume control: –100dB to 27dB
- Gain calibration with 0.1dB resolution
- Phase calibration with 163ns resolution
- Microphone bias or supply voltage generation
- Low-latency signal processing filter selection
- Programmable HPF and biquad digital filters
- I2C or SPI controls
- Integrated high-performance audio PLL
- Automatic clock divider setting configurations
- Audio serial data interface:
- Format: TDM, I2S, or left-justified (LJ)
- Word length: 16 bits, 20 bits, 24 bits, or 32 bits
- Controller or target interface
- Single-supply operation: 3.3V or 1.8V
- I/O-supply operation: 3.3V or 1.8V
- Power consumption for 1.8V supply:
- 2.9mW/channel at 16kHz sample rate
- 2.5mW/channel at 48kHz sample rate
The PCMD3180-Q1 is a high-performance, pulse-density-modulation (PDM) input to time-division multiplexing (TDM) or I2S output converter that supports simultaneous sampling of up to eight digital channels for the PDM microphone input. The device integrates programmable digital volume control, a microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for output sample rates up to 768kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. Additionally, the PCMD3180-Q1 supports controller and target mode selection for the audio bus interface operation. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3V or 1.8V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications.
The PCMD3180-Q1 is specified from –40°C to 125°C and is offered in a 24-pin WQFN package.
您可能會感興趣的類似產品
引腳對引腳的功能與所比較的產品相同
功能相同,但引腳輸出與所比較的產品不同
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | PCMD3180-Q1 Octal-Channel, PDM Input to TDM or I2 S Output Converter datasheet (Rev. A) | PDF | HTML | 2024年 1月 17日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PCMX140Q1EVM-PDK — 適用於四通道 768kHz Burr-Brown™ 音訊 ADC 的 PCMx140-Q1 評估模組
PUREPATHCONSOLE — 適用於音訊系統設計和開發的 PurePath™ Console 圖形開發套件
PurePath Console’s (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 引腳 | 下載 |
---|---|---|
VQFN (RGE) | 24 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。