SM72480

現行

1.6V，LLP-6 出廠預設溫度開關和溫度感測器

立即訂購

產品規格表

document-pdfAcrobat 1.6V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor datasheet (Rev. C) (英文)

SM72480

現行

產品規格表

立即訂購

產品詳細資料

Setpoint type

Factory Programmed

Setpoint value (°C)

105, 120, 125

Operating temperature range (°C)

-50 to 150

Accuracy over temp range (max) (°C)

2.3

Sensor gain (mV/°C)

-10.3, -7.7

Output type

Open drain, Push Pull

Supply voltage (min) (V)

1.6

Supply voltage (max) (V)

5.5

Supply current (typ) (µA)

8

Number of comparator channels

1

Rating

Automotive, Catalog

Interface type

Analog output, Switch

Setpoint type

Factory Programmed

Setpoint value (°C)

105, 120, 125

Operating temperature range (°C)

-50 to 150

Accuracy over temp range (max) (°C)

2.3

Sensor gain (mV/°C)

-10.3, -7.7

Output type

Open drain, Push Pull

Supply voltage (min) (V)

1.6

Supply voltage (max) (V)

5.5

Supply current (typ) (µA)

8

Number of comparator channels

1

Rating

Automotive, Catalog

Interface type

Analog output, Switch

WSON (NGF)

6

5.5 mm² 2.5 x 2.2

Renewable Energy Grade
Low 1.6V Operation
Latching Function: Device Can Latch the Over Temperature Condition
Push-pull and Open-Drain Temperature Switch Outputs
Very Linear Analog V_TEMP Temperature Sensor Output
V_TEMP Output Short-circuit Protected
2.2 mm by 2.5 mm (typ) WSON-6 Package
Excellent Power Supply Noise Rejection

Key Specifications

Supply Voltage 1.6V to 5.5V
Supply Current 8 μA (typ)
Accuracy, Trip Point Temperature 0°C to 150°C ±2.2°C
Accuracy, VTEMP 0°C to 150°C ±2.3°C
VTEMP Output Drive ±100 μA
Operating Temperature −50°C to 150°C
Hysteresis Temperature 4.5°C to 5.5°C

All trademarks are the property of their respective owners.

Renewable Energy Grade
Low 1.6V Operation
Latching Function: Device Can Latch the Over Temperature Condition
Push-pull and Open-Drain Temperature Switch Outputs
Very Linear Analog V_TEMP Temperature Sensor Output
V_TEMP Output Short-circuit Protected
2.2 mm by 2.5 mm (typ) WSON-6 Package
Excellent Power Supply Noise Rejection

Key Specifications

Supply Voltage 1.6V to 5.5V
Supply Current 8 μA (typ)
Accuracy, Trip Point Temperature 0°C to 150°C ±2.2°C
Accuracy, VTEMP 0°C to 150°C ±2.3°C
VTEMP Output Drive ±100 μA
Operating Temperature −50°C to 150°C
Hysteresis Temperature 4.5°C to 5.5°C

All trademarks are the property of their respective owners.

The SM72480 is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (T_TRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (T_HYST) keeps the output stable in an environment of temperature instability.

In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds T_TRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (T_TRIP − T_HYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the OVERTEMP digital output, is active-low with an open-drain structure.

The analog output, V_TEMP, delivers an analog output voltage with Negative Temperature Coefficient — NTC.

Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the V_TEMP output pin, which could be used to verify the temperature trip point.

The SM72480's low minimum supply voltage makes it ideal for 1.8 volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.

The SM72480 is a low-voltage, precision, dual-output, low-power temperature switch and temperature sensor. The temperature trip point (T_TRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (T_HYST) keeps the output stable in an environment of temperature instability.

In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds T_TRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (T_TRIP − T_HYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the OVERTEMP digital output, is active-low with an open-drain structure.

The analog output, V_TEMP, delivers an analog output voltage with Negative Temperature Coefficient — NTC.

Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the V_TEMP output pin, which could be used to verify the temperature trip point.

The SM72480's low minimum supply voltage makes it ideal for 1.8 volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of commercial and industrial applications.

open-in-new

尋找其它溫度開關

下載觀看有字幕稿的影片影片