SN65LVDT41-EP

現行

強化型產品 Memorystick™ 互聯增距器晶片組

產品詳細資料

Function Transceiver Protocols LVDS Number of transmitters 4 Number of receivers 1 Supply voltage (V) 3.3 Signaling rate (MBits) 125 Input signal LVDS, LVTTL Output signal LVDS, LVTTL Rating HiRel Enhanced Product Operating temperature range (°C) -40 to 125
Function Transceiver Protocols LVDS Number of transmitters 4 Number of receivers 1 Supply voltage (V) 3.3 Signaling rate (MBits) 125 Input signal LVDS, LVTTL Output signal LVDS, LVTTL Rating HiRel Enhanced Product Operating temperature range (°C) -40 to 125
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree
  • Integrated 110- Nominal Receiver Line Termination Resistor
  • Operate From a Single 3.3-V Supply
  • Greater Than 125-Mbps Data Rate
  • Flow-Through Pinout
  • LVTTL-Compatible Logic I/Os
  • ESD Protection on Bus Pins Exceeds 12 kV
  • Meet or Exceed Requirements of ANSI/TIA/EIA-644A Standard for LVDS
  • 20-Pin Thin Shrink Small-Outline Package (PW) With 26-Mil Terminal Pitch
  • APPLICATIONS
    • Memory Stick™ Interface Extensions With Long Interconnects Between Host and
      Memory Stick
    • Serial Peripheral Interface™ (SPI™) Interface Extension to Allow Long Interconnects
      Between Master and Slave
    • MultiMediaCard™ (MMC) Interface in SPI Mode
    • General-Purpose Asymmetric Bidirectional Communication

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Serial Peripheral Interface, SPI are trademarks of Motorola.
MultiMediaCard is a trademark of MultiMediaCard Association.
Memory Stick is a trademark of Sony.

  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product-Change Notification
  • Qualification Pedigree
  • Integrated 110- Nominal Receiver Line Termination Resistor
  • Operate From a Single 3.3-V Supply
  • Greater Than 125-Mbps Data Rate
  • Flow-Through Pinout
  • LVTTL-Compatible Logic I/Os
  • ESD Protection on Bus Pins Exceeds 12 kV
  • Meet or Exceed Requirements of ANSI/TIA/EIA-644A Standard for LVDS
  • 20-Pin Thin Shrink Small-Outline Package (PW) With 26-Mil Terminal Pitch
  • APPLICATIONS
    • Memory Stick™ Interface Extensions With Long Interconnects Between Host and
      Memory Stick
    • Serial Peripheral Interface™ (SPI™) Interface Extension to Allow Long Interconnects
      Between Master and Slave
    • MultiMediaCard™ (MMC) Interface in SPI Mode
    • General-Purpose Asymmetric Bidirectional Communication

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Serial Peripheral Interface, SPI are trademarks of Motorola.
MultiMediaCard is a trademark of MultiMediaCard Association.
Memory Stick is a trademark of Sony.

The SN65LVDT14 combines one LVDS line driver with four terminated LVDS line receivers in one package. It is designed to be used at the Memory Stick™ end of an LVDS-based Memory Stick interface extension.

The SN65LVDT41 combines four LVDS line drivers with a single terminated LVDS line receiver in one package. It is designed to be used at the host end of an LVDS-based Memory Stick interface extension.

The SN65LVDT14 combines one LVDS line driver with four terminated LVDS line receivers in one package. It is designed to be used at the Memory Stick™ end of an LVDS-based Memory Stick interface extension.

The SN65LVDT41 combines four LVDS line drivers with a single terminated LVDS line receiver in one package. It is designed to be used at the host end of an LVDS-based Memory Stick interface extension.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet SN65LVDT14-EP, SN65LVDT41-EP datasheet 2005年 6月 7日
* Radiation & reliability report SN65LVDT41QPWREP Reliability Report 2015年 2月 6日
Application brief LVDS to Improve EMC in Motor Drives 2018年 9月 27日
Application brief How Far, How Fast Can You Operate LVDS Drivers and Receivers? 2018年 8月 3日
Application brief How to Terminate LVDS Connections with DC and AC Coupling 2018年 5月 16日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

SN65LVDT41 IBIS Model

SLLC120.ZIP (7 KB) - IBIS Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
TSSOP (PW) 20 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片