SN75374

現行

10-mA/40-mA 4-通道閘極驅動器，每個輸出具有兩個 NAND 輸入

立即訂購

產品規格表

document-pdfAcrobat SN75374 datasheet (Rev. A) (英文)

SN75374

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

Power switch

MOSFET

Peak output current (A)

0.5

Input supply voltage (min) (V)

4.75

Input supply voltage (max) (V)

Features

Low Quiescent Current

Operating temperature range (°C)

0 to 70

Rise time (ns)

Fall time (ns)

Propagation delay time (µs)

0.06

Input threshold

TTL

Channel input logic

Inverting

Input negative voltage (V)

Rating

Catalog

Driver configuration

Quad inputs

Number of channels

Power switch

MOSFET

Peak output current (A)

0.5

Input supply voltage (min) (V)

4.75

Input supply voltage (max) (V)

Features

Low Quiescent Current

Operating temperature range (°C)

0 to 70

Rise time (ns)

Fall time (ns)

Propagation delay time (µs)

0.06

Input threshold

TTL

Channel input logic

Inverting

Input negative voltage (V)

Rating

Catalog

Driver configuration

Quad inputs

PDIP (N)

181.42 mm² 19.3 x 9.4

SOIC (D)

59.4 mm² 9.9 x 6

Quadruple Circuits Capable of Driving High-Capacitance Loads at High Speeds
Output Supply Voltage Range From 5 V to 24 V
Low Standby Power Dissipation
V_CC3 Supply Maximizes Output Source Voltage

Quadruple Circuits Capable of Driving High-Capacitance Loads at High Speeds
Output Supply Voltage Range From 5 V to 24 V
Low Standby Power Dissipation
V_CC3 Supply Maximizes Output Source Voltage

The SN75374 is a quadruple NAND interface circuit designed to drive power MOSFETs from TTL inputs. It provides the high current and voltage necessary to drive large capacitive loads at high speeds.

The outputs can be switched very close to the V_CC2 supply rail when V_CC3 is about 3 V higher than V_CC2. V_CC3 can also be tied directly to V_CC2 when the source voltage requirements are lower.

The SN75374 is a quadruple NAND interface circuit designed to drive power MOSFETs from TTL inputs. It provides the high current and voltage necessary to drive large capacitive loads at high speeds.

The outputs can be switched very close to the V_CC2 supply rail when V_CC3 is about 3 V higher than V_CC2. V_CC3 can also be tied directly to V_CC2 when the source voltage requirements are lower.

open-in-new

尋找其它低壓側驅動器

下載觀看有字幕稿的影片影片

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

	類型	標題	日期
*	Data sheet	SN75374 datasheet (Rev. A)	2004年 11月 5日
	Application brief	External Gate Resistor Selection Guide (Rev. A)	2020年 2月 28日
	Application brief	Understanding Peak IOH and IOL Currents (Rev. A)	2020年 2月 28日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

要求