首頁 介面 其它介面
首頁
介面
其它介面

SN75LBC771

現行

GeoPort™ 收發器

立即訂購
產品規格表

SN75LBC771

現行
產品規格表 立即訂購

產品詳細資料

Protocols Catalog Rating Catalog Operating temperature range (°C) 0 to 70
Protocols Catalog Rating Catalog Operating temperature range (°C) 0 to 70
SOIC (DW) 20 131.84 mm² 12.8 x 10.3
  • Supports a 9-Pin GeoPortTM Host Interface Standard for the Intelligent Network Port
  • Designed to Operate up to 4-Mbit/s Full Duplex
  • ±5 V Supply Operation
  • Provides 6 kV ESD Protection
  • Has Driver Short-Circuit Protection
  • Includes Failsafe Mechanism for Open Inputs
  • Is Backward Compatible with AppleTalkTM and LocalTalkTM
  • Combines Multiple Components into a Single Chip Solution
  • Complements the SN75LBC772 9-Pin GeoPort Peripheral (DCE) Interface Device
  • Uses LinBiCMOSTM Process Technology

    GeoPort, LocalTalk, and AppleTalk are trademarks of Apple Computer, Incorporated.
    LinBICMOS is a trademark of Texas Instruments Incorporated.
  • Supports a 9-Pin GeoPortTM Host Interface Standard for the Intelligent Network Port
  • Designed to Operate up to 4-Mbit/s Full Duplex
  • ±5 V Supply Operation
  • Provides 6 kV ESD Protection
  • Has Driver Short-Circuit Protection
  • Includes Failsafe Mechanism for Open Inputs
  • Is Backward Compatible with AppleTalkTM and LocalTalkTM
  • Combines Multiple Components into a Single Chip Solution
  • Complements the SN75LBC772 9-Pin GeoPort Peripheral (DCE) Interface Device
  • Uses LinBiCMOSTM Process Technology

    GeoPort, LocalTalk, and AppleTalk are trademarks of Apple Computer, Incorporated.
    LinBICMOS is a trademark of Texas Instruments Incorporated.

The SN75LBC771 is a low-power LinBiCMOSTM device that incorporates the drivers and receivers for a 9-pin GeoPort host interface. GeoPort combines hybrid EIA/TIA-422-B and EIA/TIA-423-B drivers and receivers to transmit data up to four-Mbit/s full duplex. GeoPort is a serial communications standard that is intended to replace the RS-232, AppleTalk, and printer ports all in one connector in addition to providing real-time data transfer capability. The SN75LBC771 provides point-to-point connections between GeoPort-compatible devices with data transmission rates up to 4-Mbit/s full duplex featuring a hot-plug capability. Applications include connection to telephone, ISDN, digital sound and imaging, fax-data modems, and other traditional serial and parallel connections. The GeoPort is backwardly compatible to both LocalTalk and AppleTalk.

While the SN75LBC771 is powered off (VCC and VEE = 0), the outputs are in a high-impedance state. Also, when the shutdown (SHDN) terminal is high, all outputs go into a high-impedance state. A logic high on the driver enable (DEN\) terminal places the outputs of the differential driver into a high-impedance state. All drivers and receivers have fail-safe mechanisms that ensure a high output state when the inputs are left open.

The SN75LBC771 is characterized for operation over the 0°C to 70°C temperature range.













H = high level, L = low level, X = irrelevant, ? = indeterminate, Z = high impedance (off)

-0.2 V < VID < 0.2 V

The SN75LBC771 is a low-power LinBiCMOSTM device that incorporates the drivers and receivers for a 9-pin GeoPort host interface. GeoPort combines hybrid EIA/TIA-422-B and EIA/TIA-423-B drivers and receivers to transmit data up to four-Mbit/s full duplex. GeoPort is a serial communications standard that is intended to replace the RS-232, AppleTalk, and printer ports all in one connector in addition to providing real-time data transfer capability. The SN75LBC771 provides point-to-point connections between GeoPort-compatible devices with data transmission rates up to 4-Mbit/s full duplex featuring a hot-plug capability. Applications include connection to telephone, ISDN, digital sound and imaging, fax-data modems, and other traditional serial and parallel connections. The GeoPort is backwardly compatible to both LocalTalk and AppleTalk.

While the SN75LBC771 is powered off (VCC and VEE = 0), the outputs are in a high-impedance state. Also, when the shutdown (SHDN) terminal is high, all outputs go into a high-impedance state. A logic high on the driver enable (DEN\) terminal places the outputs of the differential driver into a high-impedance state. All drivers and receivers have fail-safe mechanisms that ensure a high output state when the inputs are left open.

The SN75LBC771 is characterized for operation over the 0°C to 70°C temperature range.













H = high level, L = low level, X = irrelevant, ? = indeterminate, Z = high impedance (off)

-0.2 V < VID < 0.2 V
open-in-new 尋找其它 其它介面
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet GeoPort Transceiver datasheet (Rev. A) 1997年 11月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
封裝 引腳 下載
SOIC (DW) 20 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片