首頁 音訊 音訊放大器 喇叭放大器
首頁
音訊
音訊放大器
喇叭放大器

TAS5828M

現行

含整合式音訊處理器的 50-W 立體聲道數位輸入高性能閉合迴路 D 級

立即訂購
產品規格表

TAS5828M

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 26.4 Power stage supply (min) (V) 4.5 Load (min) (Ω) 2 Output power (W) 50 SNR (dB) 110 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 3.2 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 4.5 Analog supply voltage (max) (V) 26.4 Sampling rate (max) (kHz) 192 PSRR (dB) 72 Operating temperature range (°C) -40 to 85
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Rating Catalog Power stage supply (max) (V) 26.4 Power stage supply (min) (V) 4.5 Load (min) (Ω) 2 Output power (W) 50 SNR (dB) 110 THD + N at 1 kHz (%) 0.03 Iq (typ) (mA) 3.2 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 4.5 Analog supply voltage (max) (V) 26.4 Sampling rate (max) (kHz) 192 PSRR (dB) 72 Operating temperature range (°C) -40 to 85
HTSSOP (DAD) 32 89.1 mm² 11 x 8.1
  • Flexible audio I/O:
    • Supports 32, 44.1, 48, 88.2, 96, 192-kHz sample rates
    • I2S, LJ, RJ, TDM, SDOUT for audio monitoring, sub-channel or echo cancellation
    • Supports 3-wire digital audio interface (no MCLK required)
  • High-efficiency Class-D modulation
    • > 90% power efficiency, 90 mΩ RDSon
  • Supports multiple output configurations
    • 2 × 50 W, 2.0 Mode (4-Ω, 23 V, THD+N=1%)
    • 2 × 40 W, 2.0 Mode (6-Ω, 24 V, THD+N=1%)
    • 1 × 100 W, 1.0 Mode (2-Ω, 23 V, THD+N=1%)
    • 1 × 80 W, 1.0 Mode (3-Ω, 24 V, THD+N=1%)
  • Excellent audio performance:
    • THD+N ≤ 0.03% at 1 W, 1 kHz, PVDD = 12 V
    • SNR ≥ 110 dB (A-weighted), ICN ≤ 40 µVRMS
  • Flexible processing features
    • 3-Band advanced DRC +2 BQs + AGL + 2 BQs
    • 12 BQs per channel, level meter
    • 96-kHz, 192-kHz processor sampling
    • Mixer, volume, dynamic EQ, output cross bar
    • PVDD sensing and hybrid-pro algorithm audio signal tracking
  • Flexible power supply configurations
    • PVDD: 4.5 V to 26.4 V
    • DVDD and I/O: 1.8 V or 3.3 V
  • Excellent integrated self-protection:
    • Over-current error (OCE)
    • Cycle-by-cycle current limit
    • Over-temperature warning (OTW)
    • Over-temperature error (OTE)
    • Under and over-voltage lock-out (UVLO/OVLO)
    • PVDD voltage drop detection
  • Easy system integration
    • I2C Software or Hardware Control Mode
    • Fewer passive required compared with open-loop devices
  • Flexible audio I/O:
    • Supports 32, 44.1, 48, 88.2, 96, 192-kHz sample rates
    • I2S, LJ, RJ, TDM, SDOUT for audio monitoring, sub-channel or echo cancellation
    • Supports 3-wire digital audio interface (no MCLK required)
  • High-efficiency Class-D modulation
    • > 90% power efficiency, 90 mΩ RDSon
  • Supports multiple output configurations
    • 2 × 50 W, 2.0 Mode (4-Ω, 23 V, THD+N=1%)
    • 2 × 40 W, 2.0 Mode (6-Ω, 24 V, THD+N=1%)
    • 1 × 100 W, 1.0 Mode (2-Ω, 23 V, THD+N=1%)
    • 1 × 80 W, 1.0 Mode (3-Ω, 24 V, THD+N=1%)
  • Excellent audio performance:
    • THD+N ≤ 0.03% at 1 W, 1 kHz, PVDD = 12 V
    • SNR ≥ 110 dB (A-weighted), ICN ≤ 40 µVRMS
  • Flexible processing features
    • 3-Band advanced DRC +2 BQs + AGL + 2 BQs
    • 12 BQs per channel, level meter
    • 96-kHz, 192-kHz processor sampling
    • Mixer, volume, dynamic EQ, output cross bar
    • PVDD sensing and hybrid-pro algorithm audio signal tracking
  • Flexible power supply configurations
    • PVDD: 4.5 V to 26.4 V
    • DVDD and I/O: 1.8 V or 3.3 V
  • Excellent integrated self-protection:
    • Over-current error (OCE)
    • Cycle-by-cycle current limit
    • Over-temperature warning (OTW)
    • Over-temperature error (OTE)
    • Under and over-voltage lock-out (UVLO/OVLO)
    • PVDD voltage drop detection
  • Easy system integration
    • I2C Software or Hardware Control Mode
    • Fewer passive required compared with open-loop devices

The TAS5828M is a stereo high-performance, closed-loop Class-D with integrated audio processor with up to 192-kHz architecture.

While setting into Hardware control mode, TAS5828M supports switching frequency, analog gain, BTL/PBTL mode and cycle by cycle current limit threshold through pin configuration. This mode is especially designed to eliminate end system software driver integration efforts.

The TAS5828M is a stereo high-performance, closed-loop Class-D with integrated audio processor with up to 192-kHz architecture.

While setting into Hardware control mode, TAS5828M supports switching frequency, analog gain, BTL/PBTL mode and cycle by cycle current limit threshold through pin configuration. This mode is especially designed to eliminate end system software driver integration efforts.
open-in-new 尋找其它 喇叭放大器
下載 觀看有字幕稿的影片 影片
Information

要求更多資訊

提供 PurePath™ Console 3、TAS5828M GUI 和其他設計資源。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TAS5828M 50-W Stereo, Digital Input, High Efficiency Closed-Loop Class-D Amplifier with Hybrid-Pro Algorithm datasheet (Rev. A) PDF | HTML 2021年 12月 6日
User guide TAS5828M Evaluation Module User's Guide (Rev. A) PDF | HTML 2021年 11月 23日
Application brief How to Switch From an Analog Input Device to a Digital Input Device PDF | HTML 2021年 10月 26日
Certificate TAS5828MEVM EU RoHS Declaration of Conformity (DoC) 2021年 6月 16日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TAS5828MEVM — TAS5828M 評估模組 50-W 立體聲道、數位輸入、D 類音訊放大器

TAS5828MEVM 評估模組 (EVM) 展示了 TAS5828M，是一款具有強化處理能力和低閒置功耗的數位輸入立體聲 D 類閉迴路音訊放大器。TAS5828MEVM 是獨立式 EVM，具備單電源輸入，透過 PurePath™ Control Console 3 (PPC3) 提供 USB 控制，並提供靈活的音訊輸入選項。
使用指南: PDF | HTML
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 引腳 下載
HTSSOP (DAD) 32 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片