TDP158

現行

6-Gbps DP++ 1.1 到 HDMI 2.0 轉接驅動器

產品詳細資料

Type Redriver Protocols HDMI Rating Catalog Speed (max) (Gbps) 6 Number of channels 4 Supply voltage (V) 1.1, 3.3 Operating temperature range (°C) 0 to 85
Type Redriver Protocols HDMI Rating Catalog Speed (max) (Gbps) 6 Number of channels 4 Supply voltage (V) 1.1, 3.3 Operating temperature range (°C) 0 to 85
WQFN (RSB) 40 25 mm² 5 x 5
  • AC-coupled TMDS or DisplayPort™ dual-mode physical layer input to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps data rate, compatible with HDMI 2.0b electrical parameters
  • Supporting DisplayPort dual-mode standard version 1.1
  • Support 4k 2k 60p and up to WUXGA 16-bit color depth or 1080p with higher refresh rates
  • Programmable fixed receiver equalizer up to 15.5dB
  • Global or independent high speed lane control, pre-emphasis and transmit swing, and slew rate control
  • I2C or pin strap programmable
  • Configurable as a DisplayPort redriver through the I2C
  • Full lane swap on main lanes
  • Low power consumption
    • –200mW active at 6Gbps and –8mW at shutdown state
  • 40-pin, 0.4mm pitch, 5mm × 5mm, WQFN package, pin compatible to the SN75DP159RSB retimer
  • AC-coupled TMDS or DisplayPort™ dual-mode physical layer input to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps data rate, compatible with HDMI 2.0b electrical parameters
  • Supporting DisplayPort dual-mode standard version 1.1
  • Support 4k 2k 60p and up to WUXGA 16-bit color depth or 1080p with higher refresh rates
  • Programmable fixed receiver equalizer up to 15.5dB
  • Global or independent high speed lane control, pre-emphasis and transmit swing, and slew rate control
  • I2C or pin strap programmable
  • Configurable as a DisplayPort redriver through the I2C
  • Full lane swap on main lanes
  • Low power consumption
    • –200mW active at 6Gbps and –8mW at shutdown state
  • 40-pin, 0.4mm pitch, 5mm × 5mm, WQFN package, pin compatible to the SN75DP159RSB retimer

The TDP158 device is an AC-coupled HDMI signal to transition-minimized differential signal (TMDS) Redriver supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The TDP158 supports four TMDS channels and Digital Display Control (DDC) interfaces. The TDP158 supports signaling rates up to 6Gbps to allow for the highest resolutions of 4k 2k 60p 24 bits per pixel and up to WUXGA 16-bit color depth or 1080p with higher refresh rates. The TDP158 can be configured to support the HDMI 2.0 standard.

The TDP158 supports dual power supply rails of 1.1V on VDD and 3.3V on VCC for power reduction. Several methods of power management are implemented to reduce overall power consumption. TDP158 supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces.

The TDP158 device is an AC-coupled HDMI signal to transition-minimized differential signal (TMDS) Redriver supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The TDP158 supports four TMDS channels and Digital Display Control (DDC) interfaces. The TDP158 supports signaling rates up to 6Gbps to allow for the highest resolutions of 4k 2k 60p 24 bits per pixel and up to WUXGA 16-bit color depth or 1080p with higher refresh rates. The TDP158 can be configured to support the HDMI 2.0 standard.

The TDP158 supports dual power supply rails of 1.1V on VDD and 3.3V on VCC for power reduction. Several methods of power management are implemented to reduce overall power consumption. TDP158 supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
SN65DP159 現行 6-Gbps DP++ 1.1 至 HDMI 2.0 重新定時器,-40 至 85C 操作溫度 HDMI2.0 retimer instead of redriver (no alternative HDMI2.0 redriver)

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet TDP158 6Gbps, AC-Coupled to TMDS or HDMI Level Shifter Redriver datasheet (Rev. F) PDF | HTML 2024年 4月 4日
Application note TDP158 Configuration Guide 2020年 3月 16日
Application note TDP158 Schematic Checklist 2019年 4月 3日
User guide SNx5DP159RSB - TDP158RSB Transition Document (Rev. A) 2018年 2月 26日
EVM User's guide TDP158RSBEVM User's Guide (Rev. A) 2018年 2月 9日
Technical article How to select a redriver or retimer for HDMI 2.0 jitter cleansing PDF | HTML 2017年 5月 1日
White paper Build a true fidelity system using video signal conditioners 2016年 6月 9日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TDP158RSBEVM — 6 Gbps AC 耦合式 TMDS & HDMI™ 訊號調節器評估模組

The TDP158 EVM is a PCB created to help customers evaluate the TDP158 device for video applications.  This EVM can also be used as a hardware reference design for implementation of the TDP158 in the RSB package.  PCB design/layout files can be provided upon request to provide PCB design (...)
使用指南: PDF
TI.com 無法提供
模擬型號

TDP158 IBIS-AMI Model

SLLM364.ZIP (3486 KB) - IBIS-AMI Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
WQFN (RSB) 40 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片