TLC1543

現行

10 位元、38-kSPS ADC 序列輸出、晶片內建系統時鐘、11 通道、-40C 至 125C 溫度範圍

立即訂購

產品規格表

document-pdfAcrobat 10-Bit Analog-to-Digital Converters With Serial Control And 11 Analog Inputs datasheet (Rev. G) (英文)

現在提供此產品的更新版本

open-in-new

比較替代產品

此產品將繼續向現有客戶提供。新設計應考量替代產品。

功能與所比較的裝置相似

ADS7956

現行

10 位元、1MSPS、12 通道、單端、微功耗、序列介面、SAR ADC Higher speed, higher channel count

TLC1543

現行

產品規格表

立即訂購

產品詳細資料

Resolution (bps)

10

Sample rate (max) (ksps)

38

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Automotive, Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

4

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

4.5

Digital supply (max) (V)

5.5

Resolution (bps)

10

Sample rate (max) (ksps)

38

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Automotive, Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

4

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

4.5

Digital supply (max) (V)

5.5

PDIP (N)

20

228.702 mm² 24.33 x 9.4

PLCC (FN)

20

98.01 mm² 9.9 x 9.9

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

SSOP (DB)

20

56.16 mm² 7.2 x 7.8

10-Bit Resolution A/D Converter
11 Analog Input Channels
Three Built-In Self-Test Modes
Inherent Sample-and-Hold Function
Total Unadjusted Error. . .±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Terminal Compatible With TLC542
CMOS Technology

10-Bit Resolution A/D Converter
11 Analog Input Channels
Three Built-In Self-Test Modes
Inherent Sample-and-Hold Function
Total Unadjusted Error. . .±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Terminal Compatible With TLC542
CMOS Technology

The TLC1542C, TLC1542I, TLC1542M, TLC1542Q, TLC1543C, TLC1543I, and TLC1543Q are CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. These devices allow high-speed data transfers from the host.

In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.

The TLC1542C, TLC1542I, TLC1542M, TLC1542Q, TLC1543C, TLC1543I, and TLC1543Q are CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. These devices allow high-speed data transfers from the host.

In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.

filter

尋找其它精確 ADC

下載