TLIN2022-Q1

現行

具有顯性狀態逾時功能的故障保護雙區域互連網路 (LIN) 收發器

現在提供此產品的更新版本

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的產品
TLIN2022A-Q1 現行 具顯性狀態逾時功能的故障保護雙區域互連網路 (LIN) 收發器 Enhanced duty cycle across supply voltages

產品詳細資料

Protocols LIN Number of channels 2 Supply voltage (V) 4 to 45 Bus fault voltage (V) -58 to 58 Signaling rate (max) (Bits) 20000 Rating Automotive
Protocols LIN Number of channels 2 Supply voltage (V) 4 to 45 Bus fault voltage (V) -58 to 58 Signaling rate (max) (Bits) 20000 Rating Automotive
SOIC (D) 14 51.9 mm² 8.65 x 6 VSON (DMT) 14 13.5 mm² 4.5 x 3
  • AEC-Q100 Qualified for automotive applications
    • Temperature: –40°C to 125°C ambient
    • HBM certification level: ±8 kV
    • CDM certification level: ±1.5 kV
  • Compliant to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 (See SLLA491)
  • Conforms to SAEJ2602 recommended practice for LIN (See SLLA491)
  • Supports 24 V battery applications
  • LIN transmit data rate up to 20 kbps.
  • Wide operating ranges
    • 4 V to 45 V supply voltage
    • ±60 V LIN bus fault protection
  • Sleep mode: ultra-low current consumption allows wake-up event from:
    • LIN bus
    • Local wake up through EN
  • Power up and down glitch free operation
  • Protection features:
    • Under voltage protection on VSUP
    • TXD Dominant time out protection (DTO)
    • Thermal shutdown protection
    • Unpowered node or ground disconnection failsafe at system level.
  • Available in SOIC (14) package and leadless VSON (14) Package with improved automated optical inspection (AOI) capability
  • AEC-Q100 Qualified for automotive applications
    • Temperature: –40°C to 125°C ambient
    • HBM certification level: ±8 kV
    • CDM certification level: ±1.5 kV
  • Compliant to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 (See SLLA491)
  • Conforms to SAEJ2602 recommended practice for LIN (See SLLA491)
  • Supports 24 V battery applications
  • LIN transmit data rate up to 20 kbps.
  • Wide operating ranges
    • 4 V to 45 V supply voltage
    • ±60 V LIN bus fault protection
  • Sleep mode: ultra-low current consumption allows wake-up event from:
    • LIN bus
    • Local wake up through EN
  • Power up and down glitch free operation
  • Protection features:
    • Under voltage protection on VSUP
    • TXD Dominant time out protection (DTO)
    • Thermal shutdown protection
    • Unpowered node or ground disconnection failsafe at system level.
  • Available in SOIC (14) package and leadless VSON (14) Package with improved automated optical inspection (AOI) capability

The TLIN2022-Q1 is a Dual Local Interconnect Network (LIN) physical layer transceiver with integrated wake-up and protection features, complaint to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO/DIS 17987–4.2 standards. LIN is a single wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The TLIN2022-Q1 is designed to support 24 V applications with wider operating voltage and additional bus-fault protection. The LIN receiver supports data rates up to 100 kbps for in-line programming. The TLIN2022-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or pin.

The TLIN2022-Q1 is a Dual Local Interconnect Network (LIN) physical layer transceiver with integrated wake-up and protection features, complaint to LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and ISO/DIS 17987–4.2 standards. LIN is a single wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The TLIN2022-Q1 is designed to support 24 V applications with wider operating voltage and additional bus-fault protection. The LIN receiver supports data rates up to 100 kbps for in-line programming. The TLIN2022-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or pin.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳的功能與所比較的產品相同
TLIN1022-Q1 現行 具顯性狀態逾時功能的雙區域互連網路 (LIN) 收發器 45-V bus fault

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet TLIN2022-Q1 Automotive Fault Protected Dual Local Interconnect Network (LIN)Transceiver with Dominant State Timeout datasheet (Rev. D) PDF | HTML 2022年 6月 16日
* Errata TLIN1022-Q1 and TLIN2022-Q1 Duty Cycle Over VSUP 2020年 5月 22日
Application note LIN Protocol and Physical Layer Requirements (Rev. A) PDF | HTML 2022年 8月 24日
Technical article Transients in 24V automobiles PDF | HTML 2018年 2月 28日
Technical article Local Interconnect Network – the last mile network PDF | HTML 2018年 1月 18日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLIN2029EVM — 具有顯性狀態逾時功能的故障保護區域互連網路 (LIN) 收發器 EVM

This EVM helps designers evaluate device performance, support fast development and analyze automotive local interconnect network (LIN) systems using TLIN2029 LIN physical layer transceiver devices.
使用指南: PDF | HTML
TI.com 無法提供
開發板

TMDSHSECDOCK-AM263 — 適用於 GPMC、JTAG/TRACE、MCAN 和 LIN 訊號的 AM263x-CC HSEC 底座和斷路板。

此評估模組是用於 TMDSCNCD263 (AM263x controlCARD) 和 TMDSCNCD263P (AM263Px controlCARD) 的高速邊緣卡 (HSEC) 擴充塢,用於擴充關鍵 I/O 和硬體周邊設備。此電路板向處於評估和開發階段的客戶展示了 AM263x 和 AM263Px 上的 MCU+ SDK 的功能。除了 TMDSHSECDOCK 的功能外,此電路板還支援其他 AM263x 和 AM263Px 系列功能,例如 CAN/LIN、GPMC (僅限 AM263x)、TRACE 和 JTAG。TMDSHSECDOCK-AM263 包括一個板載 64Mb (...)
使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TLIN2022 IBIS Model

SLLM400.ZIP (32 KB) - IBIS Model
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
封裝 引腳 下載
SOIC (D) 14 檢視選項
VSON (DMT) 14 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片