TLV755P
- SOT-23-5 package with 60.3°C/W RθJA available
- Input voltage range: 1.45V to 5.5V
- Low IQ: 25µA (typical)
- Low dropout:
- 238mV (maximum) at 500mA (3.3VOUT)
- Output accuracy: 1% (maximum at 85°C)
- Built-in soft-start with monotonic VOUT rise
- Foldback current limit
- Active output discharge
- High PSRR: 46dB at 100kHz
- Stable with a 1µF ceramic output capacitor
- Packages:
- 2.9mm × 2.8mm SOT-23-5 (DBV)
- 2.9mm × 2.8mm SOT-23-5 (DYD) with thermal pad
- 1mm × 1mm X2SON-4 (DQN)
- 2mm × 2mm WSON-6 (DRV)
The TLV755P is an ultra-small, low quiescent current, low-dropout regulator (LDO) that sources 500mA with good line and load transient performance. The TLV755P is optimized for a wide variety of applications by supporting an input voltage range from 1.45V to 5.5V. To minimize cost and solution size, the device is offered in fixed output voltages ranging from 0.6V to 5V to support the lower core voltages of modern microcontrollers (MCUs). Additionally, the TLV755P has a low IQ with enable functionality to minimize standby power. This device features an internal soft-start to lower inrush current, thus providing a controlled voltage to the load and minimizing the input voltage drop during start up. When shutdown, the device actively pulls down the output to quickly discharge the outputs and provide a known start-up state.
The TLV755P is stable with small ceramic output capacitors allowing for a small overall solution size. A precision band-gap and error amplifier provides a typical accuracy of 1%. All device versions have integrated thermal shutdown, current limit, and undervoltage lockout (UVLO). The TLV755P has an internal foldback current limit that helps reduce the thermal dissipation during short-circuit events.
The TLV755 is available in the popular WSON, X2SON, and SOT23-5 (DRV, DQN, and DBV) packages. This device is also available in a thermally enhanced SOT23-5 (DYD) package with a thermal pad that provides significantly reduced thermal resistance compared to a standard SOT23-5 package.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TLV755P 500mA, Low-IQ , Small-Size, Low-Dropout Regulator datasheet (Rev. C) | PDF | HTML | 2024年 3月 13日 |
Application note | An empirical analysis of the impact of board layout on LDO thermal performance | 2019年 2月 22日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
MULTIPKGLDOEVM-823 — 支援 DBV、DRB、DRV 和 DQN 封裝的通用 LDO 線性穩壓器評估模組
MULTIPKGLDOEVM-823 評估模組 (EVM) 可協助您評估多種常用線性穩壓器封裝的運作與性能,以供電路應用使用。此特定 EVM 配置具有 DRB、DRV、DQN 和 DBV 元件封裝,能讓您焊接並評估低壓差 (LDO) 穩壓器。
USB-PD-CHG-EVM-01 — 整合式 USB Type-C® 電力傳輸 (PD) 和 2-4 芯電池 EVM 的充電參考設計
USB-PD-CHG-EVM-01 評估模組 (EVM) 可用來一起評估 BQ25798 裝置與 TPS25750 裝置。BQ25798 是採用 HOTROD (QFN) 封裝的整合式切換模式降壓升壓電池充電管理裝置,適用 3.6-24-V 輸入的 1 至 4 串聯電池芯鋰離子與鋰聚合物電池。TPS25750 為一款 USB Type-C 與 PD 控制器,可在內部供應和汲取 20-V/5-A 電流。I2C 序列介面可讓 PD 控制器驅動電池充電器,同時由主機驅動,讓這套組合成為真正靈活的解決方案
TIDA-050047 — 整合式 USB Type-C® 電力傳輸 (PD) 和 2-4 芯電池的充電參考設計
TIDA-060039 — 電感式觸控及磁性轉盤非接觸式使用者介面參考設計
使用感應式感測觸控按鈕提供完整的解決方案,該解決方案使用按壓之力來決定按鈕的按壓動作。這使觸控按鈕可以與手套一起使用,同時忽略環境因素,如按鈕表面髒污或損壞。霍爾效應感測器轉盤可產生非接觸式旋轉,與電位計或旋轉編碼器等傳統接觸式實作方式相比,其磨損與撕裂程度有所改善。
TIDA-050034 — 適用於 NXP i.MX 7D 處理器的整合式電源供應參考設計
The hardware design consists of DDR3L SDRAM (2x512MB), 64MB Serial NOR Flash, 8GB eMMC 5.0 iNAND, SD Card interface v3.0, 50 pin LCD Connector for external TFT display (...)
TIDA-050027 — 具有彈性分割功能,可最大限度地節省電源的多軌電視電源供應參考設計
PMP21557 — 精巧型低損耗隔離式四輸出返馳參考設計
封裝 | 引腳 | 下載 |
---|---|---|
SOT-23 (DBV) | 5 | 檢視選項 |
SOT-23 (DYD) | 5 | 檢視選項 |
WSON (DRV) | 6 | 檢視選項 |
X2SON (DQN) | 4 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。