TPS2394

現行

用於冗餘 -48-V 供應電源的 -12-V 至 80-V 熱插拔控制器

立即訂購

產品規格表

document-pdfAcrobat -48V Hot Swap Power Manager datasheet (英文)

TPS2394

現行

產品規格表

立即訂購

產品詳細資料

FET

External

Vin (min) (V)

-80

Vin (max) (V)

-12

Vabsmax_cont (V)

-100

Overcurrent response

current limiting

Fault response

Auto-retry

Soft start

Adjustable

Overvoltage response

Cut-off

Features

Fault output, Power good signal

Rating

Catalog

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 85

Function

Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection

FET

External

Vin (min) (V)

-80

Vin (max) (V)

-12

Vabsmax_cont (V)

-100

Overcurrent response

current limiting

Fault response

Auto-retry

Soft start

Adjustable

Overvoltage response

Cut-off

Features

Fault output, Power good signal

Rating

Catalog

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 85

Function

Adjustable current limit, Inrush current control, Overvoltage protection, Power good signal, Short circuit protection

TSSOP (PW)

14

32 mm² 5 x 6.4

Operating Supply Range of –12 V to –80 V
Withstands Transients to –100 V
Programmable Current Limit
Programmable Linear Inrush Slew Rate
Programmable UV/OV Thresholds
Programmable UV and OV Hysteresis
Fault Timer to Eliminate Nuisance Trips
Power Good and Fault Outputs
14-Pin TSSOP Package
APPLICATIONS
- –48-V Distributed Power Systems
- Central Office Switching
- ATCA Systems
- Base Stations

Operating Supply Range of –12 V to –80 V
Withstands Transients to –100 V
Programmable Current Limit
Programmable Linear Inrush Slew Rate
Programmable UV/OV Thresholds
Programmable UV and OV Hysteresis
Fault Timer to Eliminate Nuisance Trips
Power Good and Fault Outputs
14-Pin TSSOP Package
APPLICATIONS
- –48-V Distributed Power Systems
- Central Office Switching
- ATCA Systems
- Base Stations

The TPS2394 is a hot swap power manager which can provide inrush limit, over current protection, short circuit protection. The TPS2394 operates with supply voltages from −12 V to −80 V, and withstands input transient to −100 V.

The TPS2394 uses a power FET to provide load current slew rate control and peak current limiting that is programmed by one resistor and one capacitor. The device also provides a power good output to enable down-stream power converters and a fault output to indicate load problems.

The TPS2394 is a hot swap power manager which can provide inrush limit, over current protection, short circuit protection. The TPS2394 operates with supply voltages from −12 V to −80 V, and withstands input transient to −100 V.

The TPS2394 uses a power FET to provide load current slew rate control and peak current limiting that is programmed by one resistor and one capacitor. The device also provides a power good output to enable down-stream power converters and a fault output to indicate load problems.

filter

尋找其它 eFuses 和熱插拔制器

下載