TPS2513A-Q1
- AEC-Q100 Qualified:
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C5
- Automatically Selects Charge Mode
- D+ and D– Divider Mode 2.7 V and 2.7 V
- D+ and D– 1.2 V Mode
- D+ and D– Shorted Mode per USB Battery
Charging Specification, Revision 1.2 (BC1.2)
- Operating Range: 4.5 V to 5.5 V
- Dual USB Charging Port Controller,
TPS2513A-Q1 - Single USB Charging Port Controller,
TPS2514A-Q1 - Available in SOT23-6 Package
The TPS2513A-Q1 and TPS2514A-Q1 are USB dedicated charging port (DCP) controllers, used for the charging of most popular mobile phones and tablets. An auto-detect feature monitors USB data line voltage, and automatically provides the correct electrical signatures on the data lines to charge compliant devices among the following dedicated charging schemes:
Divider 3 mode, required to apply 2.7 V and 2.7 V on the D+ and D- Lines respectivelyBC1.2 shorted mode, required to short the D+ Line to the D– Line1.2 V mode, required to apply 1.2 V on the D+ and D– LinesUse with the TPS2561A-Q1 and TPS2513A-Q1 (dual channel), TPS2557-Q1 and TPS2514A-Q1 (single channel) for low loss, automotive qualified, USB Charging Port Solution capable of charging all of today’s popular phones and tablets.
您可能會感興趣的類似產品
功能相同，但引腳輸出與所比較的產品不同
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS2513A-Q1, TPS2514A-Q1 USB Dedicated Charging Port Controller datasheet (Rev. A) | PDF | HTML | 2014年 12月 22日 |
| Selection guide | USB Type-A Power Switch and Charging Controller Selector Guide (Rev. F) | 2018年 5月 24日 | ||
| Application note | Effective System ESD Protection Guidelines:TPS251x USB Charging Port Controllers | 2016年 7月 19日 | ||
| EVM User's guide | TPS2513EVM-527 (Rev. B) | 2013年 10月 10日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TPS2513EVM-527 — TPS2513 雙通道自動偵測 USB 充電控制器評估模組
The Texas Instruments TPS2513EVM-527 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS2513 Dual Channel, Auto Detect USB Charging Controller. The EVM contains input and output connectors as well as control jumpers to ease evaluation of device features
使用指南: PDF
參考設計
TIDA-01388 — 具有完整前端保護的 CISPR 25 第 5 類額定雙車用 USB 充電器參考設計
TIDA-01388 is a 21 W dual automotive USB charger solution featuring complete front end protection with small size. The system can clamp fast high-voltage electrical transients and maintain operation through these events. It can also properly respond to a reverse battery polarity event and shut down (...)
參考設計
PMP40285 — 車用雙埠 USB Type-C™ DFP 5V 3A 充電器參考設計
PMP40285 is a dual port USB Type-C™ charger reference design. This design takes an automotive input voltage, the output goes to two USB Type-C port. Each of these ports supplies 5V 3A for USB Type-C™ device. The design is fully compliant with USB type C and backwards compliant with (...)
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOT-23 (DBV) | 6 | 檢視選項 |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點