TPS55332-Q1

現行

具電壓監控器的 1.5-V 至 60-V 寬輸入範圍、3-A 升壓轉換器,符合 AEC-Q100 標準

產品詳細資料

Vin (min) (V) 1.5 Vin (max) (V) 60 Topology Boost, Flyback, Forward, SEPIC Type Converter Switching frequency (min) (kHz) 80 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Nonsynchronous, Power good, UVLO adjustable Vout (min) (V) 2.5 Vout (max) (V) 50 Rating Automotive Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0042
Vin (min) (V) 1.5 Vin (max) (V) 60 Topology Boost, Flyback, Forward, SEPIC Type Converter Switching frequency (min) (kHz) 80 Switching frequency (max) (kHz) 2200 Features Enable, Frequency synchronization, Nonsynchronous, Power good, UVLO adjustable Vout (min) (V) 2.5 Vout (max) (V) 50 Rating Automotive Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.0042
HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • Withstands Transients up to 60 V, Boost Input
    Operating Range of 1.5 V to 40 V (VIN)
  • Peak Internal Switch Current: 5.7 A (typ)
  • 2.5 V ± 1.5% Feedback Voltage Reference
  • 80 kHz to 2.2 MHz Switching Frequency
  • High Voltage Tolerant Enable Input for On/Off State
  • Soft Start on Enable Cycle
  • Slew Rate Control on Internal Power Switch
  • External Clock Input for Synchronization
  • External Compensation for Wide Bandwidth Error
    Amplifier
  • Programmable Power on Reset Delay
  • Reset Function Filter Time for Fast Negative
    Transients
  • Programmable Undervoltage Output Monitoring,
    Issuance of Reset if Output Falls Below Set
    Threshold
  • Thermal Shutdown to Protect Device During Excessive
    Power Dissipation
  • ILIM Threshold Protection (Current Limit)
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 20-Pin HTSSOP PowerPAD Package
  • Withstands Transients up to 60 V, Boost Input
    Operating Range of 1.5 V to 40 V (VIN)
  • Peak Internal Switch Current: 5.7 A (typ)
  • 2.5 V ± 1.5% Feedback Voltage Reference
  • 80 kHz to 2.2 MHz Switching Frequency
  • High Voltage Tolerant Enable Input for On/Off State
  • Soft Start on Enable Cycle
  • Slew Rate Control on Internal Power Switch
  • External Clock Input for Synchronization
  • External Compensation for Wide Bandwidth Error
    Amplifier
  • Programmable Power on Reset Delay
  • Reset Function Filter Time for Fast Negative
    Transients
  • Programmable Undervoltage Output Monitoring,
    Issuance of Reset if Output Falls Below Set
    Threshold
  • Thermal Shutdown to Protect Device During Excessive
    Power Dissipation
  • ILIM Threshold Protection (Current Limit)
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 20-Pin HTSSOP PowerPAD Package

The TPS55332 is a monolithic high-voltage switching regulator with integrated 3-A, 60-V power MOSFET. The device can be configured as a switch mode step-up power supply with voltage supervisor. Once the internal circuits have stabilized with a minimum input supply of 3.6 V, the system can then have an input voltage range from 1.5 V to 40 V, to maintain a fixed boost output voltage. For optimum performance, VIN/Vout ratios should be set such that the minimum required duty cycle pulse > 150 ns. The supervisor circuit monitors the regulated output and indicates when this output voltage has fallen below the set value. The TPS55332 has a switching frequency range from 80 kHz to 2.2 MHz, allowing the use of low profile inductors and low value input and output capacitors. The external loop compensation gives the user the flexibility to optimize the converter response for the appropriate operating conditions. Using the enable pin (EN), the shutdown supply current is reduced to 1 µA. The device has built-in protection features such soft start on enable cycle, pulse-by-pulse current limit, and thermal sensing and shutdown due to excessive power dissipation.

The TPS55332 is a monolithic high-voltage switching regulator with integrated 3-A, 60-V power MOSFET. The device can be configured as a switch mode step-up power supply with voltage supervisor. Once the internal circuits have stabilized with a minimum input supply of 3.6 V, the system can then have an input voltage range from 1.5 V to 40 V, to maintain a fixed boost output voltage. For optimum performance, VIN/Vout ratios should be set such that the minimum required duty cycle pulse > 150 ns. The supervisor circuit monitors the regulated output and indicates when this output voltage has fallen below the set value. The TPS55332 has a switching frequency range from 80 kHz to 2.2 MHz, allowing the use of low profile inductors and low value input and output capacitors. The external loop compensation gives the user the flexibility to optimize the converter response for the appropriate operating conditions. Using the enable pin (EN), the shutdown supply current is reduced to 1 µA. The device has built-in protection features such soft start on enable cycle, pulse-by-pulse current limit, and thermal sensing and shutdown due to excessive power dissipation.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
LM5157-Q1 現行 具備雙隨機展頻的 6-A、50-V、2.2-MHz 大範圍 VIN 升壓返馳及 SEPIC 轉換器 45V (50V absmax) 6A
LM51571-Q1 現行 具備雙隨機展頻的 4-A、50-V、2.2-MHz 大範圍 VIN 升壓返馳及 SEPIC 轉換器 45V (50V absmax) 4A
LM5158 現行 具備雙隨機展頻的 3-A、85-V、2.2-MHz 大範圍 VIN 升壓返馳及 SEPIC 轉換器 Newer device with higher Vin, Vout capability
LM5158-Q1 現行 具備雙隨機展頻的 3-A、85-V、2.2-MHz 大範圍 VIN 升壓返馳及 SEPIC 轉換器 LM5158-Q1 has higher Vin, Vout capability

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet TPS55332-Q1 2.2-MHz, 60-V Output Step Up DC/DC Converter datasheet (Rev. B) PDF | HTML 2014年 7月 25日
EVM User's guide TPS55332EVM USer's Guide 2009年 7月 6日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS55332EVM — TPS55332EVM 評估模組

The Texas Instruments TPS55332EVM evaluation module (EVM) helps designers evaluate the operation and performance of the TPS55332 Switch Mode Power Supply - Boost Regulator. The device offers configurability and can be setup to operate at a switching frequency from 80kHz to 2.2MHz.
使用指南: PDF
TI.com 無法提供
模擬型號

TPS55332-Q1 TINA-TI Reference Design

SLVMAE4.TSC (419 KB) - TINA-TI Reference Design
模擬型號

TPS55332-Q1 TINA-TI SPICE Model

SLVMAE5.ZIP (46 KB) - TINA-TI Spice Model
模擬型號

Unencrypted TPS55332-Q1 PSpice Transient Model Package (Rev. A)

SLVMAE3A.ZIP (36 KB) - PSpice Model
封裝 引腳 下載
HTSSOP (PWP) 20 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片