TPS566242
- Configured for a wide range of applications
- 3-V to 16-V input voltage range
- 0.6-V to 7-V output voltage range
- 0.6-V reference voltage
- ±1% reference accuracy at 25°C
- ±1.5% reference accuracy at –40°C to 125°C
- Integrated 27.7-mΩ and 14.8-mΩ RDSON FET
- 120-µA low quiescent current
- 600-kHz switching frequency
- Supports maximum 98% duty cycle operation
- Precision EN threshold voltage
- 1.39-ms fixed typical soft-start time
- Ease of use and small solution size
- Eco-mode (TPS566242) and FCCM mode at light loading (TPS566247)
- Part of a full P2P family including solutions for 4 A, 5 A, and 6 A and FCCM/ECO operation
- D-CAP3™ control topology
- Support start-up with prebiased output
- Non-latch for OV/OT/UVLO protection
- Hiccup mode for UV protection
- Cycle-by-cycle OC and NOC limit
- 6-pin SOT-563 package
- Create a custom design using the TPS566242 with the WEBENCH Power Designer
- Create a custom design using the TPS566247 with the WEBENCH Power Designer
The TPS56624x is simple, easy-to-use, high power density, high efficiency synchronous buck converter. The device supports input voltage ranging from 3 V to 16 V and up to 6-A continuous current with a SOT-563 package.
The TPS56624x uses D-CAP3 topology to provide a fast transient response and support low-ESR output capacitors with no requirement for external compensation. It has two grounds, GND and AGND, which should be connected together for optimal thermal performance. AGND also provides a good load and line regulation. The device can support up to 98% duty operation.
The TPS566242 operates in Eco-mode, which maintains high efficiency during light loading. The TPS566247 operates in FCCM mode, which keeps the same frequency and lower output ripple during all load conditions. It integrates complete protection through OVP, OCP, UVLO, OTP, and UVP with hiccup. The device is available in 1.6-mm × 1.6-mm SOT-563 package and has an optimized pinout for easy PCB layout. The junction temperature is specified from –40°C to 125°C.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS56624x 3-V to 16-V Input Voltage, 6-A Synchronous Buck Converter in a SOT-563 Package datasheet (Rev. A) | PDF | HTML | 2022年 4月 27日 |
| Application note | How to Co-Layout Three Common SOT-563 Package Pinouts (Rev. A) | PDF | HTML | 2024年 1月 25日 | |
| Application note | How to do Co-Layout Between SOT-563 Package and SOT-236 Package (Rev. A) | PDF | HTML | 2023年 7月 10日 | |
| Application note | 6-A DC/DC Buck Converter Selection Guide of Mid-range VIN | PDF | HTML | 2023年 4月 18日 | |
| Technical article | Managing thermals: 3 ways to break through power-density barriers | PDF | HTML | 2022年 10月 16日 | |
| Application brief | TPS56X242/7 Optimize SOT563 Package Pin Out | PDF | HTML | 2022年 10月 13日 | |
| Application note | How to Achieve Improved Thermal Performance on TPS56x242-7 with SOT563 Package | PDF | HTML | 2022年 4月 8日 | |
| User guide | TPS56624x Step-Down Converter Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2022年 3月 30日 | |
| Certificate | TPS566242EVM EU Declaration of Conformity (DoC) | 2022年 2月 18日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS566242EVM — 適用於 3-V 至 16-V、6-A、節能模式同步降壓式電壓轉換器的 TPS566242 評估模組
TPS566242EVM 評估模組 (EVM) 是完全組裝且經過測試的電路，用於評估 TPS566242 降壓轉換器。TPS566242 裝置是採用 SOT-563 封裝的 6-A 同步降壓轉換器。EVM 可在 3-V 至 16-V 輸入 (額定 12-V) 之間運作，並在 6 A 時提供 1.05-V 輸出。EVM 也包含用於回饋迴路量測的 AC 訊號注入端子。
| 封裝 | 引腳 | 下載 |
|---|---|---|
| SOT-5X3 (DRL) | 6 | 檢視選項 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 資格摘要
- 進行中可靠性監測
- 晶圓廠位置
- 組裝地點