TPS65167A

現行

具完全內部正電荷泵、LDO 控制器、HVS (VDD/VGH) 和溫度的 4 通道 LCD 偏置感測器

產品詳細資料

Display type LCD unipolar IC integration LCD bias Vin (min) (V) 6 Vin (max) (V) 14 Applications 13 to 21 inches, 21 inches and above Source driver voltage (max) (V) 19 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features GPM or GVS, Output discharge, Temperature sensor or compensation Topology Boost Rating Catalog Operating temperature range (°C) -40 to 85
Display type LCD unipolar IC integration LCD bias Vin (min) (V) 6 Vin (max) (V) 14 Applications 13 to 21 inches, 21 inches and above Source driver voltage (max) (V) 19 Level shifter/scan driver (Ch) 0 V_POS (max) (V) 30 V_NEG (max) (V) -2 Features GPM or GVS, Output discharge, Temperature sensor or compensation Topology Boost Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RHA) 40 36 mm² 6 x 6
  • 6 V to 14 V Input Voltage Range
  • Vs Output Voltage Range up to 19 V
  • Boost Converter With 3.5-A Switch Current
  • Boost Converter Overvoltage Protection
  • 2.5-A Step-Down Converter With 3.3-V Fixed or Adjustable Output
  • 750 kHz Fixed Switching Frequency
  • 150 mA Negative Charge Pump Driver for VGL
  • 50 mA Positive Charge Pump for VGH
  • LDO Controller for Logic Supply
  • Gate Voltage Shaping for VGH
  • Temperature Sensor Output
  • TPS65167 - High Voltage Stress Test Vs
    and VGH
  • TPS65167A - High Voltage Stress Test Vs only
  • Adjustable Sequencing
  • Gate Drive Signal for Isolation Switch
  • Short-Circuit Protection
  • Internal Soft-start
  • Thermal Shutdown
  • Available in 6 × 6 mm 40 Pin QFN Package
  • APPLICATIONS
    • LCD TV Panel
    • LCD Monitor
  • 6 V to 14 V Input Voltage Range
  • Vs Output Voltage Range up to 19 V
  • Boost Converter With 3.5-A Switch Current
  • Boost Converter Overvoltage Protection
  • 2.5-A Step-Down Converter With 3.3-V Fixed or Adjustable Output
  • 750 kHz Fixed Switching Frequency
  • 150 mA Negative Charge Pump Driver for VGL
  • 50 mA Positive Charge Pump for VGH
  • LDO Controller for Logic Supply
  • Gate Voltage Shaping for VGH
  • Temperature Sensor Output
  • TPS65167 - High Voltage Stress Test Vs
    and VGH
  • TPS65167A - High Voltage Stress Test Vs only
  • Adjustable Sequencing
  • Gate Drive Signal for Isolation Switch
  • Short-Circuit Protection
  • Internal Soft-start
  • Thermal Shutdown
  • Available in 6 × 6 mm 40 Pin QFN Package
  • APPLICATIONS
    • LCD TV Panel
    • LCD Monitor

The TPS65167 offers a compact power supply solution to provide all voltages required by a LCD panel for large size monitor and TV panel applications running from a 12-V supply rail.

The device generates all 3 voltage rails for the TFT LCD bias (Vs, VGL and VGH). In addition to that it includes a step-down converter and a LDO controller to provide two logic voltage rails. The device incorporates a high voltage switch that can be controlled by a logic signal from the external timing controller (TCON). This function allows gate voltage shaping for VGH. The device also features a high voltage stress test where the output voltage of VGH is set to typically 30 V and the output voltage of Vs is programmable to any higher voltage. The high voltage stress test is enabled by pulling the HVS pin high. The device consists of a boost converter to provide the source voltage Vs operating at a fixed switching frequency of 750 kHz. A fully integrated positive charge pump, switching automatically between doubler and tripler mode provides an adjustable regulated TFT gate on voltage VGH. A negative charge pump driver provides adjustable regulated output voltages VGL. To minimize external components the charge pumps for VGH and VGL operate at a fixed switching frequency of 1.5 MHz. The device includes safety features like overvoltage protection of the boost converter, short-circuit protection of VGH and VGL as well as thermal shutdown.

The TPS65167 offers a compact power supply solution to provide all voltages required by a LCD panel for large size monitor and TV panel applications running from a 12-V supply rail.

The device generates all 3 voltage rails for the TFT LCD bias (Vs, VGL and VGH). In addition to that it includes a step-down converter and a LDO controller to provide two logic voltage rails. The device incorporates a high voltage switch that can be controlled by a logic signal from the external timing controller (TCON). This function allows gate voltage shaping for VGH. The device also features a high voltage stress test where the output voltage of VGH is set to typically 30 V and the output voltage of Vs is programmable to any higher voltage. The high voltage stress test is enabled by pulling the HVS pin high. The device consists of a boost converter to provide the source voltage Vs operating at a fixed switching frequency of 750 kHz. A fully integrated positive charge pump, switching automatically between doubler and tripler mode provides an adjustable regulated TFT gate on voltage VGH. A negative charge pump driver provides adjustable regulated output voltages VGL. To minimize external components the charge pumps for VGH and VGL operate at a fixed switching frequency of 1.5 MHz. The device includes safety features like overvoltage protection of the boost converter, short-circuit protection of VGH and VGL as well as thermal shutdown.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品
TPS65176 現行 適用電視的 LCD 偏壓 IC This product has the same rails minus an LDO for Vaux & temperature sensor.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet Compact LCD Bias Supply for TFT-LCD TV Panels datasheet (Rev. C) 2008年 3月 10日
Application note Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 2022年 10月 28日
Application note Understanding Undervoltage Lockout in Power Devices (Rev. A) 2018年 9月 19日
Application note Generation of a VCOM buffer input using PWM signal 2015年 12月 21日
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015年 8月 17日
Application note Minimizing Ringing at the Switch Node of a Boost Converter 2006年 9月 15日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 引腳 下載
VQFN (RHA) 40 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片