TPS6521905-Q1

現行

適用於 ARM Cortex - A53 處理器的車用使用者可編程的整合式電源管理 IC

產品詳細資料

Regulated outputs (#) 7 Configurability User programmable Vin (min) (V) 1.5 Vin (max) (V) 5.5 Vout (min) (V) 0.6 Vout (max) (V) 3.4 Iout (max) (A) 3.5 Features Dynamic voltage scaling, Eco-mode, I2C control, Overcurrent protection, Power good, Power sequencing, Power supply and system monitoring, Thermal shutdown, UVLO adjustable Step-up DC/DC converter 0 Step-down DC/DC converter 3 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 4 Iq (typ) (mA) 0.25 Rating Automotive Operating temperature range (°C) -40 to 125 Processor supplier Texas Instruments Processor name Sitara AM62x, Sitara AM64x Shutdown current (ISD) (typ) (µA) 15 Switching frequency (typ) (kHz) 2300 Product type Processor and FPGA
Regulated outputs (#) 7 Configurability User programmable Vin (min) (V) 1.5 Vin (max) (V) 5.5 Vout (min) (V) 0.6 Vout (max) (V) 3.4 Iout (max) (A) 3.5 Features Dynamic voltage scaling, Eco-mode, I2C control, Overcurrent protection, Power good, Power sequencing, Power supply and system monitoring, Thermal shutdown, UVLO adjustable Step-up DC/DC converter 0 Step-down DC/DC converter 3 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 4 Iq (typ) (mA) 0.25 Rating Automotive Operating temperature range (°C) -40 to 125 Processor supplier Texas Instruments Processor name Sitara AM62x, Sitara AM64x Shutdown current (ISD) (typ) (µA) 15 Switching frequency (typ) (kHz) 2300 Product type Processor and FPGA
VQFN (RHB) 32 25 mm² 5 x 5
  • 3 Buck converters at up to 2.3-MHz switching frequency.
    • 1x VIN: 2.5 V – 5.5 V; I OUT: 3.5 A; V OUT 0.6 V – 3.4 V
    • 2x VIN: 2.5 V – 5.5 V; I OUT: 2 A; V OUT 0.6 V – 3.4 V
  • 4 linear regulators:
    • 2x VIN: 1.5 V – 5.5 V; I OUT: 400 mA; V OUT: 0.6 V – 3.4 V (configurable as load switch and bypass-mode, supporting SD-Card)
    • 2x VIN: 2.2 V – 5.5 V; I OUT: 300 mA; V OUT: 1.2 V – 3.3 V (configurable as load switch)
  • Dynamic voltage scaling on all three buck converters
  • Low IQ/PFM, PWM-mode (quasi-fixed frequency) or fixed frequency mode
  • Programmable power sequencing and default voltages
  • I 2C interface, supporting standard, fast-mode and fast-mode+
  • Designed to support systems with 14+ rails (2x TPS6521905-Q1 devices in multi-PMIC configuration)
  • 2 GPOs, 1 GPIO, and 3 multi-function-pins
  • EEPROM programmability
  • Functional safety capable
  • 3 Buck converters at up to 2.3-MHz switching frequency.
    • 1x VIN: 2.5 V – 5.5 V; I OUT: 3.5 A; V OUT 0.6 V – 3.4 V
    • 2x VIN: 2.5 V – 5.5 V; I OUT: 2 A; V OUT 0.6 V – 3.4 V
  • 4 linear regulators:
    • 2x VIN: 1.5 V – 5.5 V; I OUT: 400 mA; V OUT: 0.6 V – 3.4 V (configurable as load switch and bypass-mode, supporting SD-Card)
    • 2x VIN: 2.2 V – 5.5 V; I OUT: 300 mA; V OUT: 1.2 V – 3.3 V (configurable as load switch)
  • Dynamic voltage scaling on all three buck converters
  • Low IQ/PFM, PWM-mode (quasi-fixed frequency) or fixed frequency mode
  • Programmable power sequencing and default voltages
  • I 2C interface, supporting standard, fast-mode and fast-mode+
  • Designed to support systems with 14+ rails (2x TPS6521905-Q1 devices in multi-PMIC configuration)
  • 2 GPOs, 1 GPIO, and 3 multi-function-pins
  • EEPROM programmability
  • Functional safety capable

The TPS6521905-Q1 is a Power Management IC (PMIC) designed to supply a wide range of SoCs in automotive applications. The device is characterized across an ambient temperature range of -40°C to +125°C, making the PMIC an excellent choice for automotive applications. The device includes three synchronous stepdown DC-DC converters and four linear regulators.

The DC-DC converters are capable of 1x 3.5 A and 2x 2 A. The converters require a small 470 nH inductor, 4.7 µF input capacitance, and a minimum 10 µF output capacitance per rail depending on the switching mode configuration.

Two of the LDOs support output currents of 400 mA at an output voltage range of 0.6 V to 3.4 V. These LDOs support bypass mode, acting as a load-switch, and allow voltage-changes during operation. The other two LDOs support output currents of 300 mA at an output voltage range of 1.2 V to 3.3 V. These LDOs also support load-switch mode.

The I2C-interface, IOs, GPIOs and multi-function-pins (MFP) allow a seamless interface to a wide range of SoCs.

The TPS6521905-Q1 is a Power Management IC (PMIC) designed to supply a wide range of SoCs in automotive applications. The device is characterized across an ambient temperature range of -40°C to +125°C, making the PMIC an excellent choice for automotive applications. The device includes three synchronous stepdown DC-DC converters and four linear regulators.

The DC-DC converters are capable of 1x 3.5 A and 2x 2 A. The converters require a small 470 nH inductor, 4.7 µF input capacitance, and a minimum 10 µF output capacitance per rail depending on the switching mode configuration.

Two of the LDOs support output currents of 400 mA at an output voltage range of 0.6 V to 3.4 V. These LDOs support bypass mode, acting as a load-switch, and allow voltage-changes during operation. The other two LDOs support output currents of 300 mA at an output voltage range of 1.2 V to 3.3 V. These LDOs also support load-switch mode.

The I2C-interface, IOs, GPIOs and multi-function-pins (MFP) allow a seamless interface to a wide range of SoCs.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的產品
最新 TPS65219-Q1 現行 適用 ARM® Cortex®-A53 處理器的車用電源管理積體電路 (PMIC) Software configurable and factory programmable PMIC with same functionality.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet Automotive User programmable Power Management IC (PMIC) with three step-down DC/DC converters and four LDOs datasheet PDF | HTML 2023年 9月 28日
Application note Three Methods to Power Automotive Infotainment and Cluster Designs PDF | HTML 2024年 2月 6日
User guide TPS65219 Non-Volatile Memory (NVM) Programming Guide PDF | HTML 2023年 7月 17日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS65219EVM-SKT — TPS65219 非揮發性記憶體 (NVM) 程式設計基板

TPS65219 非揮發性記憶體 (NVM) 程式設計基板使用 MSP430F5529 微控制器 (MCU),以供客戶針對 TPS65219 電源管理 IC (PMIC) 進行 NVM 編程。該基板也包含電源端子和所有 DC 穩壓器輸入和輸出的跨接器,以及通用於量測的測試點。此程式設計基板具備一個用於在焊接到原型板之前用於編程單元的通訊端。TPS65219EVM-SKT 可用於針對 RHB 5-mm x 5-mm (0.5 mm 節距) 封裝進行編程,而 TPS65219EVM-RSM 可用於為 RSM 4-mm x 4-mm (0.4 mm 封裝) 編程。

使用指南: PDF | HTML
封裝 引腳 下載
VQFN (RHB) 32 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片