首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)
最新

TPS7H4011-SP

預覽

輻射強化、QMLV、4.5V 至 14V 輸入 12A 同步降壓轉換器

立即訂購
產品規格表

TPS7H4011-SP

預覽
產品規格表 立即訂購

產品詳細資料

Rating Space Operating temperature range (°C) 25 to 25 Type Converter Iout (max) (A) 12 Vin (min) (V) 4.5 Vin (max) (V) 14 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Differential Remote Sense, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Programmable current limit, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 11.5 Duty cycle (max) (%) 100
Rating Space Operating temperature range (°C) 25 to 25 Type Converter Iout (max) (A) 12 Vin (min) (V) 4.5 Vin (max) (V) 14 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Differential Remote Sense, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Programmable current limit, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 11.5 Duty cycle (max) (%) 100
CFP (HLB) 30 151.23232 mm² 19.28 x 7.844
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 4.5V to 14V
  • 12A maximum output current
  • High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
    • 94% at 1A
    • 86% at 9A
    • 82% at 12A
  • Integrated 45mΩ (HS) and 33mΩ (LS) MOSFETs (typ at 12V)
  • Flexible switching frequency options:
    • 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
    • 100kHz to 1MHz external sync capability
    • SYNC pins can be configured 90° out of phase to parallel up to 4 devices
  • 0.6V ± 0.67% voltage reference over line, temperature, and radiation
  • Differential remote sensing
  • Selectable current limit
  • FAULT input pin for flexible fault management
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Supports 5V to –5V inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 4.5V to 14V
  • 12A maximum output current
  • High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
    • 94% at 1A
    • 86% at 9A
    • 82% at 12A
  • Integrated 45mΩ (HS) and 33mΩ (LS) MOSFETs (typ at 12V)
  • Flexible switching frequency options:
    • 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
    • 100kHz to 1MHz external sync capability
    • SYNC pins can be configured 90° out of phase to parallel up to 4 devices
  • 0.6V ± 0.67% voltage reference over line, temperature, and radiation
  • Differential remote sensing
  • Selectable current limit
  • FAULT input pin for flexible fault management
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Supports 5V to –5V inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range

The TPS7H4011 is a 14V, 12A synchronous buck converter optimized for use in a space environment. The peak current mode converter obtains high efficiency with good transient performance and reduced component count.

The wide voltage range of the TPS7H4011 enables it to be used as a point of load regulator to convert directly from a 12V or 5V rail. The output voltage start-up ramp is controlled by the SS_TR pin. Power sequencing is possible with the EN and PWRGD pins.

The device can be configured with up-to four devices in parallel without an external clock for increased current capabilities. Additionally, various features are included such as differential remote sensing, selectable current limit, a flexible fault input pin, and configurable compensation.

The TPS7H4011 is a 14V, 12A synchronous buck converter optimized for use in a space environment. The peak current mode converter obtains high efficiency with good transient performance and reduced component count.

The wide voltage range of the TPS7H4011 enables it to be used as a point of load regulator to convert directly from a 12V or 5V rail. The output voltage start-up ramp is controlled by the SS_TR pin. Power sequencing is possible with the EN and PWRGD pins.

The device can be configured with up-to four devices in parallel without an external clock for increased current capabilities. Additionally, various features are included such as differential remote sensing, selectable current limit, a flexible fault input pin, and configurable compensation.

filter 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS7H401 1 -SP and TPS7H401 1 -SEP 4.5V to 14V Input 12 A Radiation Hardened Synchronous Buck Converter datasheet PDF | HTML 2024年 4月 19日
* Radiation & reliability report TPS7H4011-SP Total Ionizing Dose (TID) Radiation Report PDF | HTML 2024年 4月 24日
EVM User's guide TPS7H4011-SP (TPS7H4011EVM-CVAL) Evaluation Module User's Guide PDF | HTML 2024年 4月 12日
Certificate TPS7H4011EVM-CVAL EU Declaration of Conformity (DoC) 2024年 2月 21日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS7H4011EVM-CVAL — TPS7H4011-SP 評估模組

TPS7H4011EVM-CVAL 展示單一 TPS7H4011-SP 降壓轉換器的運作。電路板提供可裝入其他元件的元件封裝，以便進行自訂配置測試，並提供跨接器和測試點，以簡化裝置配置和性能驗證。

使用指南: PDF | HTML
TI.com 無法提供
計算工具

TPS7H4011-CALC — TPS7H4011 component calculator

TPS7H4011 component calculator
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
TPS7H4011-SP — 輻射強化、QMLV、4.5V 至 14V 輸入 12A 同步降壓轉換器
下載
封裝 引腳 下載
CFP (HLB) 30 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片