TPSM63606

Name: TPSM63606
Brand: TI
SKU: TPSM63606
Price: 6.55 USD

現行

採用 5-mm x 5.5-mm 強化型 HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 16-V 輸出、6-A 電源模組

立即訂購

產品規格表

document-pdfAcrobat TPSM63606 High-Density, 3-V to 36-V Input, 1-V to 16-V Output, 6-A Synchronous Buck DC/DC Power Module With Enhanced HotRod™ QFN Package datasheet (Rev. B) (英文) PDF | HTML

TPSM63606

現行

產品規格表

立即訂購

產品詳細資料

Iout (max) (A)

6

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

16

Vout (min) (V)

1

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck, Inverting Buck-Boost, Synchronous Buck

Features

EMI Tested, Enable, Frequency synchronization, Low Noise, Overcurrent protection, Power good, Spread Spectrum

Control mode

current mode

Switching frequency (max) (Hz)

2200000

Switching frequency (min) (Hz)

200000

Iout (max) (A)

6

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

16

Vout (min) (V)

1

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck, Inverting Buck-Boost, Synchronous Buck

Features

EMI Tested, Enable, Frequency synchronization, Low Noise, Overcurrent protection, Power good, Spread Spectrum

Control mode

current mode

Switching frequency (max) (Hz)

2200000

Switching frequency (min) (Hz)

200000

B3QFN (RDL)

20

27.5 mm² 5.5 x 5

Functional Safety-Capable
- Documentation available to aid functional safety system design
Versatile 36-V_IN, 6-A_OUT synchronous buck module
- Integrated MOSFETs, inductor, and controller
- Adjustable output voltage from 1 V to 16 V
- 5.0-mm × 5.5-mm × 4-mm overmolded package
- –40°C to 125°C junction temperature range
- Frequency adjustable from 200 kHz to 2.2 MHz
- Negative output voltage capability
Ultra-high efficiency across the full load range
- 95%+ peak efficiency
- External bias option for improved efficiency
- Shutdown quiescent current of 0.6 µA (typical)
Ultra-low conducted and radiated EMI signatures
- Low-noise package with dual input paths and integrated capacitors reduces switch ringing
- Spread-spectrum modulation (S suffix)
- Resistor-adjustable switch-node slew rate
- Meets CISPR 11 and 32 class B emissions
Suitable for scalable power supplies
- Pin compatible with the TPSM63604 (36 V, 4 A)
Inherent protection features for robust design
- Precision enable input and open-drain PGOOD indicator for sequencing, control, and V_IN UVLO
- Overcurrent and thermal shutdown protections
Create a custom design using the TPSM63606 with the WEBENCH Power Designer

Functional Safety-Capable
- Documentation available to aid functional safety system design
Versatile 36-V_IN, 6-A_OUT synchronous buck module
- Integrated MOSFETs, inductor, and controller
- Adjustable output voltage from 1 V to 16 V
- 5.0-mm × 5.5-mm × 4-mm overmolded package
- –40°C to 125°C junction temperature range
- Frequency adjustable from 200 kHz to 2.2 MHz
- Negative output voltage capability
Ultra-high efficiency across the full load range
- 95%+ peak efficiency
- External bias option for improved efficiency
- Shutdown quiescent current of 0.6 µA (typical)
Ultra-low conducted and radiated EMI signatures
- Low-noise package with dual input paths and integrated capacitors reduces switch ringing
- Spread-spectrum modulation (S suffix)
- Resistor-adjustable switch-node slew rate
- Meets CISPR 11 and 32 class B emissions
Suitable for scalable power supplies
- Pin compatible with the TPSM63604 (36 V, 4 A)
Inherent protection features for robust design
- Precision enable input and open-drain PGOOD indicator for sequencing, control, and V_IN UVLO
- Overcurrent and thermal shutdown protections
Create a custom design using the TPSM63606 with the WEBENCH Power Designer

Deriving from a family of synchronous buck modules, the TPSM63606 is a highly integrated 36-V, 6-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has VIN and VOUT pins located at the corners of the package for optimized input and output capacitor placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 16 V, the TPSM63606 is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total solution requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63606 module offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum option for improved EMI, integrated VCC, bootstrap, and input capacitors for increased reliability and higher density, constant switching frequency over the full load current range, and a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.

Deriving from a family of synchronous buck modules, the TPSM63606 is a highly integrated 36-V, 6-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has VIN and VOUT pins located at the corners of the package for optimized input and output capacitor placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 16 V, the TPSM63606 is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total solution requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63606 module offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum option for improved EMI, integrated VCC, bootstrap, and input capacitors for increased reliability and higher density, constant switching frequency over the full load current range, and a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.

open-in-new

尋找其它 Power modules (integrated inductor)

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

具備升級功能，可直接投入使用替代所比較的產品

TPSM63606E

現行

採用 -55°C 延伸溫度範圍的高密度 36-V 輸入、1-V 至 16-V 輸出、6-A 電源模組 Same functionality and pinout, but has more extensive qualifications to withstand extended cold temperature range: -55°C to 125°C.

功能相同，但引腳輸出與所比較的產品不同

TPSM63608

現行

採用 7.5-mm x 6.5-mm HotRod™ QFN 封裝的高密度、36-V 輸入、1-V 至 20-V 輸出、6-A 電源模組 Performance features with larger package

最新 TPSM64406

現行

高密度、36V、0.8V 至 16V 輸出、雙 3A 輸出功率模組 Dual-output 3A device configurable for 6A single output

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 7

	類型	標題		日期
*	Data sheet	TPSM63606 High-Density, 3-V to 36-V Input, 1-V to 16-V Output, 6-A Synchronous Buck DC/DC Power Module With Enhanced HotRod™ QFN Package datasheet (Rev. B)	PDF \| HTML	2022年 4月 25日
	Application note	Soldering Considerations for Power Modules (Rev. C)	PDF \| HTML	2024年 3月 14日
	Application note	How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck	PDF \| HTML	2023年 8月 16日
	Functional safety information	TPSM63606 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA	PDF \| HTML	2022年 2月 18日
	Certificate	TPSM63606SEVM EU RoHS Declaration of Conformity (DoC)		2021年 10月 26日
	User guide	TPSM63606EVM and TPSM63606SEVM Evaluation Module User’s Guide	PDF \| HTML	2021年 9月 29日
	Certificate	TPSM63606EVM EU RoHS Declaration of Conformity (DoC)		2021年 9月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPSM63606EVM — 3-V 至 36-V 輸入、1-V 至 16-V、6-A 輸出電源模組的 TPSM63606 評估板

TPSM63606EVM 和 TPSM63606SEVM 高密度評估模組 (EVM) 的設計目的是展示 TPSM63606 36-V、6-A 同步降壓 DC/DC 降壓電源模組的性能。這些 EVM 可在 3 V 至 36 V 的廣泛輸入電壓範圍內運作，可提供高於 1% 設定點準確度，及高達 6-A 輸出電流的固定 5-V 輸出。EVM 的「S」版本包含用於低 EMI 的偽隨機展頻 (PRSS)。電源模組提供先進的封裝與針腳配置設計，可改善 EMI 性能、高效率及高可靠性。有幾項功能可改善穩壓器在故障狀況下提供防護，包括電壓過低鎖定 (UVLO)、內部緩啟動、打嗝模式過電流保護 (...)

使用指南: PDF | HTML

檢視選項

模擬型號