UC1836

現行

高效率穩壓器控制器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的產品不同
TPS7A47 現行 具啟用功能的 1-A、36-V、低雜訊、高 PSRR、低壓差電壓穩壓器 Alternative product with enable, soft start and better accuracy

產品詳細資料

Vin (min) (V) 6 Vin (max) (V) 40 Iout (max) (A) 2.5 Operating temperature range (°C) -55 to 125 Rating Military Vout (min) (V) 2.5 Vout (max) (V) 35 Iq (typ) (A) 0.0037
Vin (min) (V) 6 Vin (max) (V) 40 Iout (max) (A) 2.5 Operating temperature range (°C) -55 to 125 Rating Military Vout (min) (V) 2.5 Vout (max) (V) 35 Iq (typ) (A) 0.0037
CDIP (JG) 8 64.032 mm² 9.6 x 6.67
  • Complete Control for a High Current, Low Dropout, Linear Regulator
  • Fixed 5V or Adjustable Output Voltage
  • Accurate 2.5A Current Limiting with Foldback
  • Internal Current Sense Resistor
  • Remote Sense for Improved Load Regulation
  • External Shutdown
  • Under-Voltage Lockout and Reverse Voltage Protection
  • Thermal Shutdown Protection
  • 8 Pin Mini-Dip Package (Surface Mount also Available)
  • Complete Control for a High Current, Low Dropout, Linear Regulator
  • Fixed 5V or Adjustable Output Voltage
  • Accurate 2.5A Current Limiting with Foldback
  • Internal Current Sense Resistor
  • Remote Sense for Improved Load Regulation
  • External Shutdown
  • Under-Voltage Lockout and Reverse Voltage Protection
  • Thermal Shutdown Protection
  • 8 Pin Mini-Dip Package (Surface Mount also Available)

The UC1835/6 families of linear controllers are optimized for the design of low cost, low dropout, linear regulators. Using an external pass element, dropout voltages of less than 0.5V are readily obtained. These devices contain a high gain error amplifier, a 250mA output driver, and a precision reference. In addition, current sense with fold-back provides for a 2.5A peak output current dropping to less than 0.5A at short circuit.

These devices are available in fixed, 5V, (UC1835), or adjustable, (UC1836), versions. In the fixed 5 volt version, the only external parts required are an external pass element, an output capacitor, and a compensation capacitor. On the adjustable version the output voltage can be set anywhere from 2.5V to 35V with two external resistors.

Additional features of these devices include under-voltage lockout for predictable start-up, thermal shutdown and short circuit current limiting to protect the driver device. On the fixed voltage version, a reverse voltage comparator minimizes reverse load current in the event of a negative input to output differential.

The UC1835/6 families of linear controllers are optimized for the design of low cost, low dropout, linear regulators. Using an external pass element, dropout voltages of less than 0.5V are readily obtained. These devices contain a high gain error amplifier, a 250mA output driver, and a precision reference. In addition, current sense with fold-back provides for a 2.5A peak output current dropping to less than 0.5A at short circuit.

These devices are available in fixed, 5V, (UC1835), or adjustable, (UC1836), versions. In the fixed 5 volt version, the only external parts required are an external pass element, an output capacitor, and a compensation capacitor. On the adjustable version the output voltage can be set anywhere from 2.5V to 35V with two external resistors.

Additional features of these devices include under-voltage lockout for predictable start-up, thermal shutdown and short circuit current limiting to protect the driver device. On the fixed voltage version, a reverse voltage comparator minimizes reverse load current in the event of a negative input to output differential.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet High Efficiency Regulator Controller datasheet 1999年 9月 5日
* SMD UC1836 SMD 5962-90650 2016年 6月 21日
Application note LDO Noise Demystified (Rev. B) PDF | HTML 2020年 8月 18日
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 2017年 8月 9日
Application note DN-32 Optocoupler Feedback Drive Techniques 1999年 9月 5日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

UCX836 TINA-TI Average Reference Design

SLUM218.TSC (74 KB) - TINA-TI Reference Design
模擬型號

UCX836 TINA-TI Average Spice Model

SLUM217.ZIP (12 KB) - TINA-TI Spice Model
模擬型號

UCX836 TINA-TI Transient Reference Design

SLUM215.TSC (71 KB) - TINA-TI Reference Design
模擬型號

UCX836 TINA-TI Transient Spice Model

SLUM216.ZIP (12 KB) - TINA-TI Spice Model
模擬型號

UCx836 Family PSpice Average Model

SLUM084.ZIP (124 KB) - PSpice Model
模擬型號

UCx836 Family PSpice Transient Model

SLUM083.ZIP (57 KB) - PSpice Model
封裝 引腳 下載
CDIP (JG) 8 檢視選項

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片