UC2825

現行

強化型 30V、1.5A 雙端 1MHz PWM 控制器，具有 9.2V/8.4V UVLO、80% 工作週期、-40C 至 85C

立即訂購

產品規格表

document-pdfAcrobat High Speed PWM Controller datasheet (Rev. A) (英文)

UC2825

現行

產品規格表

立即訂購

產品詳細資料

Vin (max) (V)

12

Operating temperature range (°C)

-40 to 85

Control mode

Current, Feedforward

Topology

Boost, Flyback, Forward, Full bridge, Half bridge, Push pull

Rating

Catalog

Duty cycle (max) (%)

80

Vin (max) (V)

12

Operating temperature range (°C)

-40 to 85

Control mode

Current, Feedforward

Topology

Boost, Flyback, Forward, Full bridge, Half bridge, Push pull

Rating

Catalog

Duty cycle (max) (%)

80

PDIP (N)

16

181.42 mm² 19.3 x 9.4

SOIC (DW)

16

106.09 mm² 10.3 x 10.3

Compatible with Voltage or Current Mode Topologies
Practical Operation Switching Frequencies to 1MHz
50ns Propagation Delay to Output
High Current Dual Totem Pole Outputs (1.5A Peak)
Wide Bandwidth Error Amplifier
Fully Latched Logic with Double Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start / Max. Duty Cycle Control
Under-Voltage Lockout with Hysteresis
Low Start Up Current (1.1mA)

Compatible with Voltage or Current Mode Topologies
Practical Operation Switching Frequencies to 1MHz
50ns Propagation Delay to Output
High Current Dual Totem Pole Outputs (1.5A Peak)
Wide Bandwidth Error Amplifier
Fully Latched Logic with Double Pulse Suppression
Pulse-by-Pulse Current Limiting
Soft Start / Max. Duty Cycle Control
Under-Voltage Lockout with Hysteresis
Low Start Up Current (1.1mA)

The UC1825 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.

These devices feature totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

The UC1825 family of PWM control ICs is optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward.

Protection circuitry includes a current limit comparator with a 1V threshold, a TTL compatible shutdown port, and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance.

These devices feature totem pole outputs designed to source and sink high peak currents from capacitive loads, such as the gate of a power MOSFET. The on state is designed as a high level.

open-in-new

尋找其它 AC/DC & DC/DC controllers (external FET)

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

功能相似於所比較的產品

TL494

現行

40V、0.2A 300KHz PWM 控制器 Supports push-pull topology

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

	類型	標題	日期
*	Data sheet	High Speed PWM Controller datasheet (Rev. A)	2004年 2月 24日
	Application note	Qualifier TJ = TA Defined	2010年 11月 3日
	Application note	U-110 1.5 Mhz Current Mode IC Controlled 50-Watt Power Supply	1999年 9月 5日