Space – Products
Find space-rated products
Our portfolio of space-grade products includes a vast selection of data converters, power management, digital signal processors, logic, op amps, memory, clocking and interface offerings to accelerate your design journey.
Buy space products on TI.com
Purchase HiRel products online now
We now offer HiRel products immediately available for purchase online, featuring a large inventory of space-grade and military-grade authentic TI products for your next-generation designs. We offer several features specific to aerospace and defense customers to simplify your purchasing experience at any stage – from concept to production.
Start your search below.
New space enhanced plastic (Space EP) portfolio
The Space Enhanced Plastic (Space EP) is a portfolio of radiation-tolerant devices designed for the emerging NewSpace and low Earth orbit (LEO) commercial applications. Space EP offers a cost-effective radiation-tolerant solution for shorter duration and higher volume space missions while providing features highlighted below. Learn more about our space portfolio.
- TID characterization (ELDRS-free) to 30 krad(Si)
- TID radiation lot acceptance testing (RLAT) to 20 krad(Si)
- SEL immunity to 43 MeV⋅cm2/mg
Reliability and traceability
- Military temperature range -55°C to +125°C
- Improved material set (gold bond wires, no pure Sn, etc.)
- Single-controlled baseline and lot traceability
- Vendor item drawing (VID)
- Outgassing testing per ASTM E595
|Product family||Generic part number||Description||Data sheet||
Max. TID Char. (krad)||
Max. SEL MeV⋅cm2/mg||Reliability report||
|Comparator||TLV1704-SEP||2.2-V to 36-V, 4-channel comparator in space-enhanced plastic||Download|
|CAN transceiver||SN55HVD233-SEP||3.3V CAN transceiver in space-enhanced plastic package with standby mode||Download|
|RS-422 transceiver||SN65C1168E-SEP||RS-422 dual differential drivers and receivers space-enhanced plastic||Download|
|Digital isolator||ISOS141-SEP||100-Mbps, radiation tolerant quad-channel, 3/1 digital isolator in space enhanced plastic||Download|
|Current sense amplifier||INA240-SEP||80-V, low/high-side, current sense amplifier with enhanced PWM rejection in space-enhanced plastic||Download|
|RF PLLs & synthesizers||LMX2694-SEP||15-GHz wideband PLLatinum™ RF synthesizer||Download||V62/19616|
|Linear regulator (LDO)||TPS73801-SEP||1-A, low-noise fast-transient-response LDO in space-enhanced plastic||Download|
|Buck converter||TPS7H4010-SEP||3.5-V to 32-VIN, 6-A step-down DC/DC converter in space-enhanced plastic||Download|
|Supervisor & reset IC||TL7700-SEP||40-V supply-voltage supervisor in space-enhanced plastic||Download|
|MSP430 MCU||*MSP430FR5969-SP||Radiation-hardened, 16-MHz, mixed-signal MCU with 64-KB FRAM, 2-KB SRAM, 40 IO||Download|
|Catalog (commercial)||Automotive (Q100)||Enhanced products (EP)||Military (QMLQ)||Space enhanced plastics (Space EP)||Space (QMLV)||Space (QMLV-RHA)|
|Tailored for high-volume commercial applications and flexible supply.||High reliability for automotive applications with flexible supply. Packages can use matte Sn and Cu bond wires.||Plastic-packaged parts built with enhanced material sets for harsh environments, controlled by Defense Logistics Agency Vendor Item Drawings (VIDs).||Ceramic military grade parts released to a MIL spec. Intended for extreme environments and long term dormant storage.||Enhanced plastic parts characterized for total dose and single event radiation performance designed for LEO short lifetime missions.||Space grade parts release to a MIL spec. Meant for long lifetime, high reliability missions.||Same as QMLV but additional lot testing and screening for TID (Radiation Assured).|
|Single controlled baseline|
|Can pure tin (Sn) be used?|
|Typical temperature range||-40oC-85oC||-40oC-125oC||-55oC-125oC *||-55oC-125oC||-55oC-125oC||-55oC-125oC||-55oC-125oC|
|Extra qualification & process monitors||None||X-ray & reflow, outlier control||Extended HAST, x-ray & reflow, outlier||MIL-PRF-38535 Group A, B, C, D||Group E, temp cycle, CSAM/TSAM, x-ray & reflow, extended HAST, outlier control||MIL-PRF-38535 Group A, B, C, D||MIL-PRF-38535 Group A, B, C, D, E|
|Life test per wafer lot|
* EP parts are not all available in -55oC to +125oC but most devices do support this range. All QMLQ, QMLV products are required to support this temperature range.