SBAS663A May   2014  – June 2015 ADC32J42 , ADC32J43 , ADC32J44 , ADC32J45

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Electrical Characteristics
    6. 7.6  Electrical Characteristics: ADC32J44, ADC32J45
    7. 7.7  Electrical Characteristics: ADC32J42, ADC32J43
    8. 7.8  AC Performance: ADC32J45
    9. 7.9  AC Performance: ADC32J44
    10. 7.10 AC Performance: ADC32J43
    11. 7.11 AC Performance: ADC32J42
    12. 7.12 Digital Characteristics
    13. 7.13 Timing Requirements
    14. 7.14 Typical Characteristics: ADC32J45
    15. 7.15 Typical Characteristics: ADC32J44
    16. 7.16 Typical Characteristics: ADC32J43
    17. 7.17 Typical Characteristics: ADC32J42
    18. 7.18 Typical Characteristics: Common Plots
    19. 7.19 Typical Characteristics: Contour Plots
  8. Parameter Measurement Information
    1. 8.1 Timing Diagrams
  9. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Analog Inputs
      2. 9.3.2 Clock Input
        1. 9.3.2.1 SNR and Clock Jitter
        2. 9.3.2.2 Input Clock Divider
      3. 9.3.3 Power-Down Control
      4. 9.3.4 Internal Dither Algorithm
      5. 9.3.5 JESD204B Interface
        1. 9.3.5.1 JESD204B Initial Lane Alignment (ILA)
        2. 9.3.5.2 JESD204B Test Patterns
        3. 9.3.5.3 JESD204B Frame Assembly
        4. 9.3.5.4 Digital Outputs
    4. 9.4 Device Functional Modes
      1. 9.4.1 Digital Gain
      2. 9.4.2 Overrange Indication
    5. 9.5 Programming
      1. 9.5.1 Serial Interface
        1. 9.5.1.1 Register Initialization
          1. 9.5.1.1.1 Serial Register Write
          2. 9.5.1.1.2 Serial Register Readout
      2. 9.5.2 Register Initialization
      3. 9.5.3 Start-Up Sequence
    6. 9.6 Register Maps
      1. 9.6.1 Summary of Special Mode Registers
      2. 9.6.2 Serial Register Descriptions
        1. 9.6.2.1  Register 01h (address = 01h)
        2. 9.6.2.2  Register 03h (address = 03h)
        3. 9.6.2.3  Register 04h (address = 04h)
        4. 9.6.2.4  Register 06h (address = 06h)
        5. 9.6.2.5  Register 07h (address = 07h)
        6. 9.6.2.6  Register 08h (address = 08h)
        7. 9.6.2.7  Register 09h (address = 09h)
        8. 9.6.2.8  Register 0Ah (address = 0Ah)
        9. 9.6.2.9  Register 0Bh (address = 0Bh)
        10. 9.6.2.10 Register 0Ch (address = 0Ch)
        11. 9.6.2.11 Register 0Dh (address = 0Dh)
        12. 9.6.2.12 Register 0Eh (address = 0Eh)
        13. 9.6.2.13 Register 0Fh (address = 0Fh)
        14. 9.6.2.14 Register 13h (address = 13h)
        15. 9.6.2.15 Register 15h (address = 15h)
        16. 9.6.2.16 Register 27h (address = 27h)
        17. 9.6.2.17 Register 2Ah (address = 2Ah)
        18. 9.6.2.18 Register 2Bh (address = 2Bh)
        19. 9.6.2.19 Register 2Fh (address = 2Fh)
        20. 9.6.2.20 Register 30h (address = 30h)
        21. 9.6.2.21 Register 31h (address = 31h)
        22. 9.6.2.22 Register 34h (address = 34h)
        23. 9.6.2.23 Register 3Ah (address = 3Ah)
        24. 9.6.2.24 Register 3Bh (address = 3Bh)
        25. 9.6.2.25 Register 3Ch (address = 3Ch)
        26. 9.6.2.26 Register 422h (address = 422h)
        27. 9.6.2.27 Register 434h (address = 434h)
        28. 9.6.2.28 Register 522h (address = 522h)
        29. 9.6.2.29 Register 534h (address = 534h)
  10. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Applications
      1. 10.2.1 Driving Circuit Design: Low Input Frequencies
        1. 10.2.1.1 Design Requirements
        2. 10.2.1.2 Detailed Design Procedure
        3. 10.2.1.3 Application Curves
      2. 10.2.2 Driving Circuit Design: Input Frequencies Between 100 MHz to 230 MHz
        1. 10.2.2.1 Design Requirements
        2. 10.2.2.2 Detailed Design Procedure
        3. 10.2.2.3 Application Curve
      3. 10.2.3 Driving Circuit Design: Input Frequencies Greater than 230 MHz
        1. 10.2.3.1 Design Requirements
        2. 10.2.3.2 Detailed Design Procedure
        3. 10.2.3.3 Application Curve
  11. 11Power-Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13Device and Documentation Support
    1. 13.1 Related Links
    2. 13.2 Community Resources
    3. 13.3 Trademarks
    4. 13.4 Electrostatic Discharge Caution
    5. 13.5 Glossary
  14. 14Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

12 Layout

12.1 Layout Guidelines

The ADC32J4x EVM layout can be used as a reference layout to obtain the best performance. A layout diagram of the EVM top layer is provided in Figure 202. Some important points to remember when laying out the board are:

  1. Analog inputs are located on opposite sides of the device pin out to ensure minimum crosstalk on the package level. To minimize crosstalk onboard, the analog inputs must exit the pin out in opposite directions as much as possible, as shown in the reference layout of Figure 202.
  2. In the device pin out, the sampling clock is located on a side perpendicular to the analog inputs in order to minimize coupling between them. This configuration is also maintained on the reference layout of Figure 202 as much as possible.
  3. Keep digital outputs away from the analog inputs. When these digital outputs exit the pin out, the digital output traces must not be kept parallel to the analog input traces because this configuration may result in coupling from digital outputs to analog inputs and degrade performance. All digital output traces to the receiver [such as a field-programmable gate array (FPGA) or an application-specific integrated circuit (ASIC)] must be matched in length to avoid skew among outputs.
  4. At each power-supply pin (AVDD and DVDD), a 0.1-µF decoupling capacitor must be kept close to the device. A separate decoupling capacitor group consisting of a parallel combination of 10-µF, 1-µF, and 0.1-µF capacitors can be kept close to the supply source.

12.2 Layout Example

ADC32J42 ADC32J43 ADC32J44 ADC32J45 Lyt_BAS668.gifFigure 202. Typical Layout of the ADC32J4x Board