SBASB82 May   2025 ADS9127 , ADS9128 , ADS9129

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Electrical Characteristics
    6. 5.6  Timing Requirements
    7. 5.7  Switching Characteristics
    8. 5.8  Timing Diagrams
    9. 5.9  Typical Characteristics: All Devices
    10. 5.10 Typical Characteristics: ADS9129
    11. 5.11 Typical Characteristics: ADS9128
    12. 5.12 Typical Characteristics: ADS9127
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Analog Inputs
      2. 6.3.2 Analog Input Bandwidth
      3. 6.3.3 ADC Transfer Function
      4. 6.3.4 Reference Voltage
      5. 6.3.5 Temperature Sensor
      6. 6.3.6 Data Averaging
      7. 6.3.7 Digital Down Converter
      8. 6.3.8 Data Interface
        1. 6.3.8.1 Data Frame Width
        2. 6.3.8.2 Synchronizing Multiple ADCs
        3. 6.3.8.3 Test Patterns for Data Interface
          1. 6.3.8.3.1 Fixed Pattern
          2. 6.3.8.3.2 Alternating Test Pattern
          3. 6.3.8.3.3 Digital Ramp
      9. 6.3.9 ADC Sampling Clock Input
    4. 6.4 Device Functional Modes
      1. 6.4.1 Reset
      2. 6.4.2 Power-Down Options
      3. 6.4.3 Normal Operation
      4. 6.4.4 Initialization Sequence
    5. 6.5 Programming
      1. 6.5.1 Register Write
      2. 6.5.2 Register Read
      3. 6.5.3 Multiple Devices: Daisy-Chain Topology for SPI Configuration
        1. 6.5.3.1 Register Write With Daisy-Chain
        2. 6.5.3.2 Register Read With Daisy-Chain
  8. 7 Register Map
    1. 7.1 Register Bank 0
    2. 7.2 Register Bank 1
    3. 7.3 Register Bank 2
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Data Acquisition (DAQ) Circuit for a ≤20kHz Input Signal Bandwidth
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
        3. 8.2.1.3 Application Curves
      2. 8.2.2 Data Acquisition (DAQ) Circuit for a ≤100kHz Input Signal Bandwidth
        1. 8.2.2.1 Design Requirements
        2. 8.2.2.2 Application Curves
      3. 8.2.3 Data Acquisition (DAQ) Circuit for a ≤1MHz Input Signal Bandwidth
        1. 8.2.3.1 Design Requirements
        2. 8.2.3.2 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Documentation Support
      1. 9.1.1 Related Documentation
    2. 9.2 Receiving Notification of Documentation Updates
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Glossary
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Mechanical Data

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.5.2 Register Read

Select the desired register bank by writing to register address 0x03 in register bank 0. Set SPI_RD_EN = 1b and SPI_MODE = 1b in register bank 0 to enable register read access. As illustrated in Figure 6-11, read registers with two 24-bit SPI frames after setting SPI_RD_EN and SPI_MODE. The first SPI frame selects the register bank. The ADC returns the 16-bit register value in the second SPI frame corresponding to the 8-bit register address.

As illustrated in Figure 6-11, steps to read a register are:

  1. Frame 1: With SPI_RD_EN = 0b, write to register address 0x03 in register bank 0 to select the desired register bank 0 for reading.
  2. Frame 2: Set SPI_RD_EN = 1b and SPI_MODE = 1b in register address 0x00 in register bank 0.
  3. Frame 3: Read any register in the selected bank using a 24-bit SPI frame containing the desired register address. Repeat this step with the address of any register in the selected bank to read the corresponding register.
  4. Frame 4: Set SPI_RD_EN = 0 to disable register reads and re-enable register writes.
  5. Repeat steps 1 through 4 to read registers in a different bank.

ADS9127 ADS9128 ADS9129 Register ReadFigure 6-11 Register Read