SPRSP58B june   2022  – june 2023 AM620-Q1 , AM623 , AM625 , AM625-Q1

PRODUCTION DATA  

  1.   1
  2. Features
  3. Applications
  4. Description
    1. 3.1 Functional Block Diagram
  5. Revision History
  6. Device Comparison
    1. 5.1 Related Products
  7. Terminal Configuration and Functions
    1. 6.1 Pin Diagrams
    2. 6.2 Pin Attributes
      1.      12
      2.      13
    3. 6.3 Signal Descriptions
      1.      15
      2. 6.3.1  CPSW3G
        1. 6.3.1.1 MAIN Domain
          1.        18
          2.        19
          3.        20
          4.        21
      3. 6.3.2  CPTS
        1. 6.3.2.1 MAIN Domain
          1.        24
      4. 6.3.3  CSI-2
        1. 6.3.3.1 MAIN Domain
          1.        27
      5. 6.3.4  DDRSS
        1. 6.3.4.1 MAIN Domain
          1.        30
      6. 6.3.5  DSS
        1. 6.3.5.1 MAIN Domain
          1.        33
      7. 6.3.6  ECAP
        1. 6.3.6.1 MAIN Domain
          1.        36
          2.        37
          3.        38
      8. 6.3.7  Emulation and Debug
        1. 6.3.7.1 MAIN Domain
          1.        41
        2. 6.3.7.2 MCU Domain
          1.        43
      9. 6.3.8  EPWM
        1. 6.3.8.1 MAIN Domain
          1.        46
          2.        47
          3.        48
          4.        49
      10. 6.3.9  EQEP
        1. 6.3.9.1 MAIN Domain
          1.        52
          2.        53
          3.        54
      11. 6.3.10 GPIO
        1. 6.3.10.1 MAIN Domain
          1.        57
          2.        58
        2. 6.3.10.2 MCU Domain
          1.        60
      12. 6.3.11 GPMC
        1. 6.3.11.1 MAIN Domain
          1.        63
      13. 6.3.12 I2C
        1. 6.3.12.1 MAIN Domain
          1.        66
          2.        67
          3.        68
          4.        69
        2. 6.3.12.2 MCU Domain
          1.        71
        3. 6.3.12.3 WKUP Domain
          1.        73
      14. 6.3.13 MCAN
        1. 6.3.13.1 MAIN Domain
          1.        76
        2. 6.3.13.2 MCU Domain
          1.        78
          2.        79
      15. 6.3.14 MCASP
        1. 6.3.14.1 MAIN Domain
          1.        82
          2.        83
          3.        84
      16. 6.3.15 MCSPI
        1. 6.3.15.1 MAIN Domain
          1.        87
          2.        88
          3.        89
        2. 6.3.15.2 MCU Domain
          1.        91
          2.        92
      17. 6.3.16 MDIO
        1. 6.3.16.1 MAIN Domain
          1.        95
      18. 6.3.17 MMC
        1. 6.3.17.1 MAIN Domain
          1.        98
          2.        99
          3.        100
      19. 6.3.18 OLDI
        1. 6.3.18.1 MAIN Domain
          1.        103
      20. 6.3.19 OSPI
        1. 6.3.19.1 MAIN Domain
          1.        106
      21. 6.3.20 Power Supply
        1.       108
      22. 6.3.21 PRUSS
        1. 6.3.21.1 MAIN Domain
          1.        111
          2.        112
      23. 6.3.22 Reserved
        1.       114
      24. 6.3.23 System and Miscellaneous
        1. 6.3.23.1 Boot Mode Configuration
          1. 6.3.23.1.1 MAIN Domain
            1.         118
        2. 6.3.23.2 Clock
          1. 6.3.23.2.1 MCU Domain
            1.         121
          2. 6.3.23.2.2 WKUP Domain
            1.         123
        3. 6.3.23.3 System
          1. 6.3.23.3.1 MAIN Domain
            1.         126
          2. 6.3.23.3.2 MCU Domain
            1.         128
          3. 6.3.23.3.3 WKUP Domain
            1.         130
        4. 6.3.23.4 VMON
          1.        132
      25. 6.3.24 TIMER
        1. 6.3.24.1 MAIN Domain
          1.        135
        2. 6.3.24.2 MCU Domain
          1.        137
        3. 6.3.24.3 WKUP Domain
          1.        139
      26. 6.3.25 UART
        1. 6.3.25.1 MAIN Domain
          1.        142
          2.        143
          3.        144
          4.        145
          5.        146
          6.        147
          7.        148
        2. 6.3.25.2 MCU Domain
          1.        150
        3. 6.3.25.3 WKUP Domain
          1.        152
      27. 6.3.26 USB
        1. 6.3.26.1 MAIN Domain
          1.        155
          2.        156
    4. 6.4 Pin Connectivity Requirements
  8. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings for Devices which are not AEC - Q100 Qualified
    3. 7.3  ESD Ratings for AEC - Q100 Qualified Devices in the AMC Package
    4. 7.4  Power-On Hours (POH)
    5. 7.5  Recommended Operating Conditions
    6. 7.6  Operating Performance Points
    7. 7.7  Power Consumption Summary
    8. 7.8  Electrical Characteristics
      1. 7.8.1  I2C Open-Drain, and Fail-Safe (I2C OD FS) Electrical Characteristics
      2. 7.8.2  Fail-Safe Reset (FS RESET) Electrical Characteristics
      3. 7.8.3  High-Frequency Oscillator (HFOSC) Electrical Characteristics
      4. 7.8.4  Low-Frequency Oscillator (LFXOSC) Electrical Characteristics
      5. 7.8.5  SDIO Electrical Characteristics
      6. 7.8.6  LVCMOS Electrical Characteristics
      7. 7.8.7  OLDI LVDS (OLDI) Electrical Characteristics
      8. 7.8.8  CSI-2 (D-PHY) Electrical Characteristics
      9. 7.8.9  USB2PHY Electrical Characteristics
      10. 7.8.10 DDR Electrical Characteristics
    9. 7.9  VPP Specifications for One-Time Programmable (OTP) eFuses
      1. 7.9.1 Recommended Operating Conditions for OTP eFuse Programming
      2. 7.9.2 Hardware Requirements
      3. 7.9.3 Programming Sequence
      4. 7.9.4 Impact to Your Hardware Warranty
    10. 7.10 Thermal Resistance Characteristics
      1. 7.10.1 Thermal Resistance Characteristics for ALW and AMC Packages
    11. 7.11 Timing and Switching Characteristics
      1. 7.11.1 Timing Parameters and Information
      2. 7.11.2 Power Supply Requirements
        1. 7.11.2.1 Power Supply Slew Rate Requirement
        2. 7.11.2.2 Power Supply Sequencing
          1. 7.11.2.2.1 Power-Up Sequencing
          2. 7.11.2.2.2 Power-Down Sequencing
          3. 7.11.2.2.3 Partial IO Power Sequencing
      3. 7.11.3 System Timing
        1. 7.11.3.1 Reset Timing
        2. 7.11.3.2 Error Signal Timing
        3. 7.11.3.3 Clock Timing
      4. 7.11.4 Clock Specifications
        1. 7.11.4.1 Input Clocks / Oscillators
          1. 7.11.4.1.1 MCU_OSC0 Internal Oscillator Clock Source
            1. 7.11.4.1.1.1 Load Capacitance
            2. 7.11.4.1.1.2 Shunt Capacitance
          2. 7.11.4.1.2 MCU_OSC0 LVCMOS Digital Clock Source
          3. 7.11.4.1.3 WKUP_LFOSC0 Internal Oscillator Clock Source
          4. 7.11.4.1.4 WKUP_LFOSC0 LVCMOS Digital Clock Source
          5. 7.11.4.1.5 WKUP_LFOSC0 Not Used
        2. 7.11.4.2 Output Clocks
        3. 7.11.4.3 PLLs
        4. 7.11.4.4 Recommended System Precautions for Clock and Control Signal Transitions
      5. 7.11.5 Peripherals
        1. 7.11.5.1  CPSW3G
          1. 7.11.5.1.1 CPSW3G MDIO Timing
          2. 7.11.5.1.2 CPSW3G RMII Timing
          3. 7.11.5.1.3 CPSW3G RGMII Timing
        2. 7.11.5.2  CPTS
        3. 7.11.5.3  CSI-2
        4. 7.11.5.4  DDRSS
        5. 7.11.5.5  DSS
        6. 7.11.5.6  ECAP
        7. 7.11.5.7  Emulation and Debug
          1. 7.11.5.7.1 Trace
          2. 7.11.5.7.2 JTAG
        8. 7.11.5.8  EPWM
        9. 7.11.5.9  EQEP
        10. 7.11.5.10 GPIO
        11. 7.11.5.11 GPMC
          1. 7.11.5.11.1 GPMC and NOR Flash — Synchronous Mode
          2. 7.11.5.11.2 GPMC and NOR Flash — Asynchronous Mode
          3. 7.11.5.11.3 GPMC and NAND Flash — Asynchronous Mode
        12. 7.11.5.12 I2C
        13. 7.11.5.13 MCAN
        14. 7.11.5.14 MCASP
        15. 7.11.5.15 MCSPI
          1. 7.11.5.15.1 MCSPI — Controller Mode
          2. 7.11.5.15.2 MCSPI — Peripheral Mode
        16. 7.11.5.16 MMCSD
          1. 7.11.5.16.1 MMC0 - eMMC/SD/SDIO Interface
            1. 7.11.5.16.1.1  Legacy SDR Mode
            2. 7.11.5.16.1.2  High Speed SDR Mode
            3. 7.11.5.16.1.3  HS200 Mode
            4. 7.11.5.16.1.4  Default Speed Mode
            5. 7.11.5.16.1.5  High Speed Mode
            6. 7.11.5.16.1.6  UHS–I SDR12 Mode
            7. 7.11.5.16.1.7  UHS–I SDR25 Mode
            8. 7.11.5.16.1.8  UHS–I SDR50 Mode
            9. 7.11.5.16.1.9  UHS–I DDR50 Mode
            10. 7.11.5.16.1.10 UHS–I SDR104 Mode
          2. 7.11.5.16.2 MMC1/MMC2 - SD/SDIO Interface
            1. 7.11.5.16.2.1 Default Speed Mode
            2. 7.11.5.16.2.2 High Speed Mode
            3. 7.11.5.16.2.3 UHS–I SDR12 Mode
            4. 7.11.5.16.2.4 UHS–I SDR25 Mode
            5. 7.11.5.16.2.5 UHS–I SDR50 Mode
            6. 7.11.5.16.2.6 UHS–I DDR50 Mode
            7. 7.11.5.16.2.7 UHS–I SDR104 Mode
        17. 7.11.5.17 OLDI
          1. 7.11.5.17.1 OLDI0 Switching Characteristics
        18. 7.11.5.18 OSPI
          1. 7.11.5.18.1 OSPI0 PHY Mode
            1. 7.11.5.18.1.1 OSPI0 With PHY Data Training
            2. 7.11.5.18.1.2 OSPI0 Without Data Training
              1. 7.11.5.18.1.2.1 OSPI0 PHY SDR Timing
              2. 7.11.5.18.1.2.2 OSPI0 PHY DDR Timing
          2. 7.11.5.18.2 OSPI0 Tap Mode
            1. 7.11.5.18.2.1 OSPI0 Tap SDR Timing
            2. 7.11.5.18.2.2 OSPI0 Tap DDR Timing
        19. 7.11.5.19 PRUSS
          1. 7.11.5.19.1 PRUSS Programmable Real-Time Unit (PRU)
            1. 7.11.5.19.1.1 PRUSS PRU Direct Output Mode Timing
            2. 7.11.5.19.1.2 PRUSS PRU Parallel Capture Mode Timing
            3. 7.11.5.19.1.3 PRUSS PRU Shift Mode Timing
          2. 7.11.5.19.2 PRUSS Industrial Ethernet Peripheral (IEP)
            1. 7.11.5.19.2.1 PRUSS IEP Timing
          3. 7.11.5.19.3 PRUSS Universal Asynchronous Receiver Transmitter (UART)
            1. 7.11.5.19.3.1 PRUSS UART Timing
          4. 7.11.5.19.4 PRUSS Enhanced Capture Peripheral (ECAP)
            1. 7.11.5.19.4.1 PRUSS ECAP Timing
        20. 7.11.5.20 Timers
        21. 7.11.5.21 UART
        22. 7.11.5.22 USB
  9. Detailed Description
    1. 8.1 Overview
    2. 8.2 Processor Subsystems
      1. 8.2.1 Arm Cortex-A53 Subsystem
      2. 8.2.2 Device/Power Manager
      3. 8.2.3 Arm Cortex-M4F
    3. 8.3 Accelerators and Coprocessors
      1. 8.3.1 Graphics Processing Unit (GPU)
      2. 8.3.2 Programmable Real-Time Unit Subsystem (PRUSS)
    4. 8.4 Other Subsystems
      1. 8.4.1 Dual Clock Comparator (DCC)
      2. 8.4.2 Data Movement Subsystem (DMSS)
      3. 8.4.3 Memory Cyclic Redundancy Check (MCRC)
      4. 8.4.4 Peripheral DMA Controller (PDMA)
      5. 8.4.5 Real-Time Clock (RTC)
    5. 8.5 Peripherals
      1. 8.5.1  Gigabit Ethernet Switch (CPSW3G)
      2. 8.5.2  Camera Streaming Interface Receiver (CSI_RX_IF)
      3. 8.5.3  DDR Subsystem (DDRSS)
      4. 8.5.4  Display Subsystem (DSS)
      5. 8.5.5  Enhanced Capture (ECAP)
      6. 8.5.6  Error Location Module (ELM)
      7. 8.5.7  Enhanced Pulse Width Modulation (EPWM)
      8. 8.5.8  Error Signaling Module (ESM)
      9. 8.5.9  Enhanced Quadrature Encoder Pulse (EQEP)
      10. 8.5.10 General-Purpose Interface (GPIO)
      11. 8.5.11 General-Purpose Memory Controller (GPMC)
      12. 8.5.12 Global Timebase Counter (GTC)
      13. 8.5.13 Inter-Integrated Circuit (I2C)
      14. 8.5.14 Modular Controller Area Network (MCAN)
      15. 8.5.15 Multichannel Audio Serial Port (MCASP)
      16. 8.5.16 Multichannel Serial Peripheral Interface (MCSPI)
      17. 8.5.17 Multi-Media Card Secure Digital (MMCSD)
      18. 8.5.18 Octal Serial Peripheral Interface (OSPI)
      19. 8.5.19 Timers
      20. 8.5.20 Universal Asynchronous Receiver/Transmitter (UART)
      21. 8.5.21 Universal Serial Bus Subsystem (USBSS)
  10. Applications, Implementation, and Layout
    1. 9.1 Device Connection and Layout Fundamentals
      1. 9.1.1 Power Supply
        1. 9.1.1.1 Power Supply Designs
        2. 9.1.1.2 Power Distribution Network Implementation Guidance
      2. 9.1.2 External Oscillator
      3. 9.1.3 JTAG, EMU, and TRACE
      4. 9.1.4 Reset
      5. 9.1.5 Unused Pins
    2. 9.2 Peripheral- and Interface-Specific Design Information
      1. 9.2.1 DDR Board Design and Layout Guidelines
      2. 9.2.2 OSPI/QSPI/SPI Board Design and Layout Guidelines
        1. 9.2.2.1 No Loopback, Internal PHY Loopback, and Internal Pad Loopback
        2. 9.2.2.2 External Board Loopback
        3. 9.2.2.3 DQS (only available in Octal SPI devices)
      3. 9.2.3 USB VBUS Design Guidelines
      4. 9.2.4 System Power Supply Monitor Design Guidelines
      5. 9.2.5 High Speed Differential Signal Routing Guidance
      6. 9.2.6 Thermal Solution Guidance
  11. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
      1. 10.1.1 Standard Package Symbolization
      2. 10.1.2 Device Naming Convention
    2. 10.2 Tools and Software
    3. 10.3 Documentation Support
    4. 10.4 Support Resources
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 Glossary
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Packaging Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • ALW|425
Thermal pad, mechanical data (Package|Pins)
Orderable Information

The following list describes the contents of each column in Table 6-1, Pin Attributes (ALW, AMC Packages):

  1. BALL NUMBER: Ball numbers assigned to each terminal of the Ball Grid Array package.
  2. BALL NAME: Ball name assigned to each terminal of the Ball Grid Array package (this name is typically taken from the primary MUXMODE 0 signal function).
  3. SIGNAL NAME: Signal name(s) of all dedicated and pin multiplexed signal functions associated with a ball.
    Note:

    Many device pins support multiple signal functions. Some signal functions are selected via a single layer of multiplexers associated with pins. Other signal functions are selected via two or more layers of multiplexers, where one layer is associated with the pins and other layers are associated with peripheral logic functions.

    Table 6-1, Pin Attributes (ALW, AMC Packages) only defines signal multiplexing at the pins. For more information, related to signal multiplexing at the pins, see the Pad Configuration Registers section in the Device Configuration chapter of the device TRM. For information associated with peripheral signal multiplexing, see the respective peripheral chapter in the device TRM.


  4. MUX MODE: The MUXMODE value associated with each pin multiplexed signal function:
    1. MUXMODE 0 is the primary pin multiplexed signal function. However, the primary pin multiplexed signal function is not necessarily the default pin multiplexed signal function.
      Note:

      The value found in the MUX MODE AFTER RESET column defines the default pin multiplexed signal function selected when MCU_PORz is deasserted.


    2. MUXMODE values 1 through 15 are possible for pin multiplexed signal functions. However, not all MUXMODE values have been implemented. The only valid MUXMODE values are those defined as pin multiplexed signal functions within the Pin Attributes table. Only valid values of MUXMODE should be used.
    3. Bootstrap defines SOC configuration pins, where the logic state applied to each pin is latched on the rising edge of PORz_OUT. These input signal functions are fixed to their respective pins and are not programmable via MUXMODE.
    4. An empty box means Not Applicable.
    Note:

    The following configurations of MUXMODE must be avoided for proper device operation.

    • Configuring multiple pins operating as inputs to the same pin multiplexed signal function is not supported as it can yield unexpected results.
    • Configuring a pin to an undefined pin multiplexing mode will cause the pin behavior to be undefined.


  5. TYPE: Signal type and direction:
    • I = Input
    • O = Output
    • OD = Output, with open-drain output function
    • IO = Input, Output, or simultaneously Input and Output
    • IOD = Input, Output, or simultaneously Input and Output, with open-drain output function
    • IOZ = Input, Output, or simultaneously Input and Output, with three-state output function
    • OZ = Output with three-state output function
    • A = Analog
    • PWR = Power
    • GND = Ground
    • CAP = LDO Capacitor.

  6. DSIS: The deselected input state (DSIS) indicates the state driven to the subsystem input (logic "0", logic "1", or "pad" level) when the pin multiplexed signal function is not selected by MUXMODE.
    • 0: Logic 0 driven to the subsystem input.
    • 1: Logic 1 driven to the subsystem input.
    • pad: Logic state of the pad is driven to the subsystem input.
    • An empty box means Not Applicable.

  7. BALL STATE DURING RESET RX/TX/PULL: State of the terminal while MCU_PORz is asserted, where RX defines the state of the input buffer, TX defines the state of the output buffer, and PULL defines the state of internal pull resistors:
    • RX (Input buffer)
      • Off: The input buffer is disabled.
      • On: The input buffer is enabled.
    • TX (Output buffer)
      • Off: The output buffer is disabled.
      • Low: The output buffer is enabled and drives VOL.
    • PULL (Internal pull resistors)
      • Off: Internal pull resistors are turned off.
      • Up: Internal pull-up resistor is turned on.
      • Down: Internal pull-down resistor is turned on.
      • NA: Not Applicable.
    • An empty box means Not Applicable.

  8. BALL STATE AFTER RESET RX/TX/PULL: State of the terminal after MCU_PORz is deasserted, where RX defines the state of the input buffer, TX defines the state of the output buffer, and PULL defines the state of internal pull resistors:
    • RX (Input buffer)
      • Off: The input buffer is disabled.
      • On: The input buffer is enabled.
    • TX (Output buffer)
      • Off: The output buffer is disabled.
      • SS: The subsystem selected with MUXMODE determines the output buffer state.
    • PULL (Internal pull resistors)
      • Off: Internal pull resistors are turned off.
      • Up: Internal pull-up resistor is turned on.
      • Down: Internal pull-down resistor is turned on.
      • NA: Not Applicable.
    • An empty box means Not Applicable.

  9. MUX MODE AFTER RESET: The value found in this column defines the default pin multiplexed signal function after MCU_PORz is deasserted.

    An empty box means Not Applicable.


  10. I/O OPERATING VOLTAGE: This column describes I/O operating voltage options of the respective power supply, when applicable.

    An empty box means Not Applicable.

    For more information, see valid operating voltage range(s) defined for each power supply in Section 7.5, Recommended Operating Conditions.


  11. POWER: The power supply of the associated I/O, when applicable.

    An empty box means Not Applicable.


  12. HYS: Indicates if the input buffer associated with this I/O has hysteresis:
    • Yes: With hysteresis
    • No: Without hysteresis
    • An empty box means Not Applicable.

    For more information, see the hysteresis values in Section 7.8, Electrical Characteristics.


  13. BUFFER TYPE: This column defines the buffer type associated with a terminal. This information can be used to determine which Electrical Characteristics table is applicable.

    An empty box means Not Applicable.

    For electrical characteristics, refer to the appropriate buffer type table in Section 7.8, Electrical Characteristics.


  14. PULL UP/DOWN TYPE: Indicates the presence of an internal pullup or pulldown resistor. Pullup and pulldown resistors can be enabled or disabled via software.
    • PU: Internal pull-up
    • PD: Internal pull-down
    • PU/PD: Internal pull-up and pull-down
    • An empty box means No internal pull.

  15. PADCONFIG Register:Name of the IO pad configuration register associated with Ball.
  16. PADCONFIG Address:Physical address of the IO pad configuration register associated with Ball.