SWRS304D October   2024  â€“ November 2025 CC2744R7-Q1 , CC2745P10-Q1 , CC2745R10-Q1 , CC2745R7-Q1

PRODMIX  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Functional Block Diagram
  6. 5 Device Comparison
  7. 6 Pin Configuration and Functions
    1. 6.1 Pin Diagrams
      1. 6.1.1 Pin Diagram—RHA package
    2. 6.2 Signal Descriptions
      1. 6.2.1 Signal Descriptions—RHA Package
    3. 6.3 Connections for Unused Pins and Modules
      1. 6.3.1 Connections for Unused Pins and Modules—RHA Package
    4. 6.4 Peripheral Pin Mapping
      1. 6.4.1 RHA Peripheral Pin Mapping
    5. 6.5 Peripheral Signal Descriptions
      1. 6.5.1 RHA Peripheral Signal Descriptions
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD and MSL Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  DC/DC
    5. 7.5  GLDO
    6. 7.6  Power Supply and Modules
    7. 7.7  Battery Monitor
    8. 7.8  BATMON Temperature Sensor
    9. 7.9  Power Consumption—Power Modes
    10. 7.10 Power Consumption—Radio Modes (R variant)
    11. 7.11 Power Consumption–Radio Modes (P variant)
    12. 7.12 Nonvolatile (Flash) Memory Characteristics
    13. 7.13 Thermal Resistance Characteristics
    14. 7.14 RF Frequency Bands
    15. 7.15 Bluetooth Low Energy—Receive (RX)
    16. 7.16 Bluetooth Low Energy—Transmit (TX)
    17. 7.17 Bluetooth Channel Sounding
    18. 7.18 2.4GHz RX/TX CW
    19. 7.19 Timing and Switching Characteristics
      1. 7.19.1 Reset Timing
      2. 7.19.2 Wakeup Timing
      3. 7.19.3 Clock Specifications
        1. 7.19.3.1 48MHz Crystal Oscillator (HFXT)
        2. 7.19.3.2 96MHz RC Oscillator (HFOSC)
        3. 7.19.3.3 80/90/98MHz RC Oscillator (AFOSC)
        4. 7.19.3.4 32kHz Crystal Oscillator (LFXT)
        5. 7.19.3.5 32kHz RC Oscillator (LFOSC)
    20. 7.20 Peripheral Characteristics
      1. 7.20.1 UART
        1. 7.20.1.1 UART Characteristics
      2. 7.20.2 SPI
        1. 7.20.2.1 SPI Characteristics
        2. 7.20.2.2 SPI Controller Mode
        3. 7.20.2.3 SPI Timing Diagrams—Controller Mode
        4. 7.20.2.4 SPI Peripheral Mode
        5. 7.20.2.5 SPI Timing Diagrams—Peripheral Mode
      3. 7.20.3 I2C
        1. 7.20.3.1 I2C Characteristics
        2. 7.20.3.2 I2C Timing Diagram
      4. 7.20.4 I2S
        1. 7.20.4.1 I2S Controller Mode
        2. 7.20.4.2 I2S Peripheral Mode
      5. 7.20.5 CAN-FD
        1. 7.20.5.1 CAN-FD Characteristics
      6. 7.20.6 GPIO
        1. 7.20.6.1 GPIO DC Characteristics
      7. 7.20.7 ADC
        1. 7.20.7.1 Analog-to-Digital Converter (ADC) Characteristics
      8. 7.20.8 Comparators
        1. 7.20.8.1 Low power comparator
      9. 7.20.9 Voltage Glitch Monitor
    21. 7.21 Typical Characteristics
      1. 7.21.1 MCU Current
      2. 7.21.2 RX Current
      3. 7.21.3 TX Current
      4. 7.21.4 RX Performance
      5. 7.21.5 TX Performance
      6. 7.21.6 ADC Performance
  9. 8 Detailed Description
    1. 8.1  Overview
    2. 8.2  System CPU
    3. 8.3  Radio (RF Core)
      1. 8.3.1 Bluetooth Low Energy
    4. 8.4  Memory
    5. 8.5  Hardware Security Module (HSM)
    6. 8.6  Cryptography
    7. 8.7  Timers
    8. 8.8  Algorithm Processing Unit (APU)
    9. 8.9  Serial Peripherals and I/O
    10. 8.10 Battery and Temperature Monitor
    11. 8.11 Voltage Glitch Monitor (VGM)
    12. 8.12 µDMA
    13. 8.13 Debug
    14. 8.14 Power Management
    15. 8.15 Clock Systems
    16. 8.16 Network Processor
    17. 8.17 Integrated BALUN, High Power PA (Power Amplifier)
  10. 9 Application, Implementation, and Layout
    1. 9.1 Reference Designs
    2. 9.2 Junction Temperature Calculation
  11. 10Device and Documentation Support
    1. 10.1 Device Nomenclature
    2. 10.2 Tools and Software
      1. 10.2.1 SimpleLinkâ„¢ Microcontroller Platform
      2. 10.2.2 Software License and Notice
    3. 10.3 Documentation Support
    4. 10.4 Support Resources
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

6.5.1 RHA Peripheral Signal Descriptions

Table 6-4 RHA (QFN40) Peripheral Signal Descriptions
FUNCTION SIGNAL NAME Pin No. PIN
TYPE		 SIGNAL DIRECTION DESCRIPTION
QFN40
ADC ADC0 33 I/O I ADC channel 0 input
ADC1 32 ADC channel 1 input
ADC3 24 ADC channel 3 input
ADC4 23 ADC channel 4 input
ADC5 22 ADC channel 5 input
ADC6 21 ADC channel 6 input
ADC7 20 ADC channel 7 input
ADC8 19 ADC channel 8 input
ADC Reference AREF+ 32 I/O I ADC external voltage reference, positive terminal
AREF- 33 ADC external voltage reference, negative terminal
CAN-FD CAN0TX 4 I/O O CAN0 transmit data output
19
CAN0RX 5 I/O I CAN0 receive data input
20
Clock X32P 26 I/O I 32kHz crystal oscillator pin 1
X32N 27 I/O I 32kHz crystal oscillator pin 2
X48P 35 — I 48MHz crystal oscillator pin 1, Optional TCXO input
X48N 36 — I 48MHz crystal oscillator pin 2
CKMIN 32 I/O I HFOSC tracking loop reference clock input
LFCI 26 I/O I GPIO input for low frequency clock input (LFXT bypass clock from pin) or optional TCXO
Comparator LPCO 3 I/O O Low power comparator output
15
27
LPC+ 21 I/O I Low power comparator positive input terminal
22
23
LPC- 22 Lower power comparator negative input terminal
23
Digital Test Bus DTB0 32 I/O O Digital test bus output 0
DTB1 24 Digital test bus output 1
DTB2 23 Digital test bus output 2
DTB3 22 Digital test bus output 3
DTB4 21 Digital test bus output 4
DTB5 20 Digital test bus output 5
DTB6 19 Digital test bus output 6
DTB7 16 Digital test bus output 7
DTB8 14 Digital test bus output 8
DTB9 13 Digital test bus output 9
DTB10 10 Digital test bus output 10
DTB11 8 Digital test bus output 11
DTB12 7 Digital test bus output 12
DTB13 6 Digital test bus output 13
DTB14 5 Digital test bus output 14
DTB15 4 Digital test bus output 15
GPIO GPIO0 3 I/O I/O General-purpose input or output
GPIO1 4
GPIO2 5
GPIO3 6
GPIO4 7
GPIO5 8
GPIO7 10
GPIO9 11
GPIO10 12
GPIO11 13
GPIO12 14
GPIO15 15
GPIO16 16
GPIO17 19
GPIO18 20
GPIO19 21
GPIO20 22
GPIO21 23
GPIO22 24
GPIO23 26
GPIO24 27
GPIO27 32
GPIO28 33
I2C I2C0SCL 11 I/O I/O I2C clock
23
32
I2C0SDA 12 I/O I/O I2C data
24
33
I2S I2S0MCLK 16 I/O O I2S main clock
I2S0SCLK 6 I/O I/O I2S serial clock
19
I2S0WS 10 I/O I/O I2S word select
20
I2S0SD0 11 I/O I/O I2S serial data 0
21
I2S0SD1 12 I/O I/O I2S serial data 1
22
EXTCI 16 I/O I I2S external clock
LRF Digital Output LRFD0 19 I/O O LRF digital output 0
LRFD1 20 LRF digital output 1
LRFD2 21 LRF digital output 2
LRFD3 22 LRF digital output 3
LRFD4 23 LRF digital output 4
LRFD5 24 LRF digital output 5
LRFD6 32 LRF digital output 6
LRFD7 33 LRF digital output 7
Power VDDR 1 — — Internal supply
2
34
VDDS 18 — — 1.71V to 3.8V DIO supply
29
31
38
VDDD 28 — — For decoupling of internal 1.32V regulated core-supply.
VDDIO 9 — — 1.71V to 3.8V split rail I/O supply
17
DCDC 30 — — Switching node of internal DC/DC converter
Reset RSTN 25 — — Global master device reset (active low)
RF ANT 39 — — 50-ohm RF port
SPI SPI0SCLK 6 I/O I/O SPI0 clock
22
SPI0POCI 7 I/O I/O SPI0 peripheral out controller in
8
24
SPI0CSN 10 I/O I/O SPI0 chip-select
21
SPI0PICO 7 I/O I/O SPI0 peripheral in controller out
8
23
SPI1SCLK 15 I/O I/O SPI1 clock
27
SPI1POCI 13 I/O I/O SPI1 peripheral out controller in
14
33
SPI1CSN 16 I/O I/O SPI1 chip select
26
SPI1PICO 13 I/O I/O SPI1 peripheral in controller out
14
32
SWD SWDIO 11 I/O I/O Serial wire data input/output
SWDCK 12 I/O I Serial wire clock input

Trace

 SWO 13 I/O O

Serial wire output
Timers - Capture/Compare T0C0 3 I/O I/O

Capture input-0 / compare output-0 of Timer-0
19
27
T0C1 11

Capture input-1 / compare output-1 of Timer-0

20
T0C2 12 Capture input-2 / compare output-2 of Timer-0
26
T1C0 3 I/O I/O Capture input-0 / compare output-0 of Timer-1
4
26
T1C1 4

Capture input-1 / compare output-1 of Timer-1

5
T1C2 5 Capture input-2 / compare output-2 of Timer-1
7
T2C0 4 I/O I/O Capture input-0 / compare output-0 of Timer-2
6
T2C1 7

Capture input-1 / compare output-1 of Timer-2
8
T2C2 8 Capture input-2 / compare output-2 of Timer-2
10
T3C0 13 I/O I/O Capture input-0 / compare output-0 of Timer-3
16
T3C1 14

Capture input-1 / compare output-1 of Timer-3
15
T3C2 14 Capture input-2 / compare output-2 of Timer-3
15
Timers - Complementary Capture/PWM T0C0N 27 I/O O Complementary compare/PWM output-0 from Timer-0
T0C1N 32 Complementary compare/PWM output-1 from Timer-0
T0C2N 33 Complementary compare/PWM output-2 from Timer-0
T1C0N 15 I/O O Complementary compare/PWM output-0 from Timer-1
T1C1N 23 Complementary compare/PWM output-1 from Timer-1
T1C2N 24 Complementary compare/PWM output-2 from Timer-1
T2C0N 11 I/O O Complementary compare/PWM output-0 from Timer-2
T2C1N 12 Complementary compare/PWM output-1 from Timer-2
T2C2N 14 Complementary compare/PWM output-2 from Timer-2
T3C0N 3 I/O O Complementary compare/PWM output-0 from Timer-3
33
T3C1N 8 Complementary compare/PWM output-1 from Timer-3
T3C2N 10 Complementary compare/PWM output-2 from Timer-3
Timers - Fault input T1F 3 I/O I Fault input for Timer-1
13
16
Timers - Prescaler Event T0PE 5 I/O O Prescaler event output from Timer-0
11
T2PE 6 I/O O Prescaler event output from Timer-2
12
UART UART0TXD 4 I/O O UART0 TX data
21
22
UART0RXD 5 I/O I UART0 RX data
21
22
UART0CTS 20 I/O I UART0 clear-to-send input (active low)
UART0RTS 19 I/O O UART0 request-to-send (active low)
UART1TXD 6 I/O O UART1 TX data
23
UART1RXD 7 I/O I UART1 RX data
24
UART1CTS 27 I/O I UART1 clear-to-send input (active low)
UART1RTS 26 I/O O UART1 request-to-send (active low)