SLVSDD5 August 2017 DRV5012
PRODUCTION DATA.
Refer to the PDF data sheet for device specific package drawings
PIN | I/O | DESCRIPTION | |
---|---|---|---|
NAME | NO. | ||
GND | 2 | — | Ground reference |
OUT | 3 | O | Push-pull CMOS output. Drives a VCC or ground level. |
SEL | 4 | I | CMOS input that selects the sampling rate: a low voltage sets 20 Hz; a high voltage sets 2.5 kHz. |
VCC | 1 | — | 1.65-V to 5.5-V power supply. TI recommends connecting this pin to a ceramic capacitor to ground with a value of at least 0.1 µF. |
Thermal Pad | PAD | — | No-connect. This pin should be left floating or tied to ground. It should be soldered to the board for mechanical support. |