SLOS068Z June   1976  – July 2021 LM158 , LM158A , LM258 , LM258A , LM2904 , LM2904B , LM2904BA , LM2904V , LM358 , LM358A , LM358B , LM358BA

PRODUCTION DATA  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Electrical Characteristics: LM358B and LM358BA
    6. 7.6  Electrical Characteristics: LM2904B and LM2904BA
    7. 7.7  Electrical Characteristics: LM358, LM358A
    8. 7.8  Electrical Characteristics: LM2904, LM2904V
    9. 7.9  Electrical Characteristics: LM158, LM158A
    10. 7.10 Electrical Characteristics: LM258, LM258A
    11. 7.11 Typical Characteristics: LM358B and LM2904B
    12. 7.12 Typical Characteristics: LM158, LM158A, LM258, LM258A, LM358, LM358A, LM2904, and LM2904V
  8. Parameter Measurement Information
  9. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram: LM358B, LM358BA, LM2904B, LM2904BA
    3. 9.3 Feature Description
      1. 9.3.1 Unity-Gain Bandwidth
      2. 9.3.2 Slew Rate
      3. 9.3.3 Input Common Mode Range
    4. 9.4 Device Functional Modes
  10. 10Application and Implementation
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Curve
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Examples
  13. 13Device and Documentation Support
    1. 13.1 Receiving Notification of Documentation Updates
    2. 13.2 Support Resources
    3. 13.3 Trademarks
    4. 13.4 Electrostatic Discharge Caution
    5. 13.5 Glossary
  14. 14Mechanical, Packaging, and Orderable Information

Package Options

Refer to the PDF data sheet for device specific package drawings

Mechanical Data (Package|Pins)
  • D|8
  • P|8
  • DGK|8
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Electrical Characteristics: LM158, LM158A

For VS = (V+) – (V–) = 5 V, TA = 25°C (unless otherwise noted)
PARAMETERTEST CONDITIONS(1)MINTYP(2)MAXUNIT
OFFSET VOLTAGE
VOSInput offset voltageVS = 5 V to 30 V; VCM = 0 V; VO = 1.4 VLM15835mV
TA = –55°C to 125°C7
LM158A2
TA = –55°C to 125°C4
dVOS/dTInput offset voltage driftLM158TA = –55°C to 125°C7µV/°C
LM158ATA = –55°C to 125°C715(3)
PSRRInput offset voltage vs power supply (ΔVIO/ΔVS)VS = 5 V to 30 V65100dB
VO1/ VO2Channel separationf = 1 kHz to 20 kHz120dB
INPUT VOLTAGE RANGE
VCMCommon-mode voltage rangeVS = 5 V to 30 VLM158(V–)(V+) – 1.5V
VS = 30 VLM158A
VS = 5 V to 30 VLM158TA = –55°C to 125°C(V–)(V+) – 2
VS = 30 VLM158A
CMRRCommon-mode rejection ratioVS = 5 V to 30 V; VCM = 0 V7080dB
INPUT BIAS CURRENT
IBInput bias currentVO = 1.4 VLM158–20–150nA
TA = –55°C to 125°C–300
LM158A–15–50
TA = –55°C to 125°C–100
IOSInput offset currentVO = 1.4 VLM158230nA
TA = –55°C to 125°C100
LM158A210
TA = –55°C to 125°C30
dIOS/dTInput offset current drift10pA/°C
LM158ATA = –55°C to 125°C200
NOISE
enInput voltage noise densityf = 1 kHz40nV/√ Hz
OPEN-LOOP GAIN
AOLOpen-loop voltage gainVS = 15 V; VO = 1 V to 11 V; RL ≥ 2 kΩ50100V/mV
TA = –55°C to 125°C25
FREQUENCY RESPONSE
GBWGain bandwidth product0.7MHz
SRSlew rateG = +10.3V/µs
OUTPUT
VOVoltage output swing from railPositive railVS = 30 V; RL = 2 kΩTA = –55°C to 125°C4V
VS = 30 V; RL ≥ 10 kΩ23
VS = 5 V; RL ≥ 2 kΩ1.5
Negative railVS = 5 V; RL ≤ 10 kΩTA = –55°C to 125°C520mV
IOOutput currentVS = 15 V; VO = 0 V; VID = 1 VSource–20–30mA
LM158A–60
TA = –55°C to 125°C–10
VS = 15 V; VO = 15 V; VID = –1 VSink1020
TA = –55°C to 125°C5
VID = –1 V; VO = 200 mV1230µA
ISCShort-circuit currentVS = 10 V; VO = VS / 2±40±60mA
POWER SUPPLY
IQQuiescent current per amplifierVO = 2.5 V; IO = 0 ATA = –55°C to 125°C350600µA
VS = 30 V; VO = 15 V; IO = 0 A5001000
All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. Maximum VS for testing purposes is 30 V for LM158 and LM158A.
All typical values are TA = 25°C.
On products compliant to MIL-PRF-38535, this parameter is not production tested.