SLAS703C April   2010  – September 2020 MSP430BT5190


  1. 1Features
  2. 2Applications
  3. 3Description
  4. 4Functional Block Diagram
  5. 5Revision History
  6. 6Terminal Configuration and Functions
    1. 6.1 Pin Diagrams
    2. 6.2 Signal Descriptions
      1. 6.2.1 Terminal Functions
  7. 7Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Active Mode Supply Current Into VCC Excluding External Current
    5. 7.5  Low-Power Mode Supply Currents (Into VCC) Excluding External Current
    6. 7.6  Thermal Characteristics
    7. 7.7  Schmitt-Trigger Inputs – General-Purpose I/O
    8. 7.8  Inputs – Ports P1 and P2
    9. 7.9  Leakage Current – General-Purpose I/O
    10. 7.10 Outputs – General-Purpose I/O (Full Drive Strength)
    11. 7.11 Outputs – General-Purpose I/O (Reduced Drive Strength)
    12. 7.12 Output Frequency – General-Purpose I/O
    13. 7.13 Typical Characteristics – Outputs, Full Drive Strength (PxDS.y = 1)
    14. 7.14 Typical Characteristics – Outputs, Reduced Drive Strength (PxDS.y = 0)
    15. 7.15 Crystal Oscillator, XT1, Low-Frequency Mode
    16. 7.16 Crystal Oscillator, XT1, High-Frequency Mode
    17. 7.17 Crystal Oscillator, XT2
    18. 7.18 Internal Very-Low-Power Low-Frequency Oscillator (VLO)
    19. 7.19 Internal Reference, Low-Frequency Oscillator (REFO)
    20. 7.20 DCO Frequency
    21. 7.21 PMM, Brown-Out Reset (BOR)
    22. 7.22 PMM, Core Voltage
    23. 7.23 PMM, SVS High Side
    24. 7.24 PMM, SVM High Side
    25. 7.25 PMM, SVS Low Side
    26. 7.26 PMM, SVM Low Side
    27. 7.27 Wake-up Times From Low-Power Modes and Reset
    28. 7.28 Timer_A
    29. 7.29 Timer_B
    30. 7.30 USCI (UART Mode), Recommended Operating Conditions
    31. 7.31 USCI (UART Mode)
    32. 7.32 USCI (SPI Master Mode), Recommended Operating Conditions
    33. 7.33 USCI (SPI Master Mode)
    34. 7.34 USCI (SPI Slave Mode)
    35. 7.35 USCI (I2C Mode)
    36. 7.36 12-Bit ADC, Power Supply and Input Range Conditions
    37. 7.37 12-Bit ADC, Timing Parameters
    38. 7.38 12-Bit ADC, Linearity Parameters
    39. 7.39 12-Bit ADC, Temperature Sensor and Built-In VMID
    40. 7.40 REF, External Reference
    41. 7.41 REF, Built-In Reference
    42. 7.42 Flash Memory
    43. 7.43 JTAG and Spy-Bi-Wire Interface
  8. 8Detailed Description
    1. 8.1  CPU
    2. 8.2  Operating Modes
    3. 8.3  Interrupt Vector Addresses
    4. 8.4  Memory Organization
    5. 8.5  Bootstrap Loader (BSL)
    6. 8.6  JTAG Operation
      1. 8.6.1 JTAG Standard Interface
      2. 8.6.2 Spy-Bi-Wire Interface
    7. 8.7  Flash Memory
    8. 8.8  RAM
    9. 8.9  Peripherals
      1. 8.9.1  Digital I/O
      2. 8.9.2  Oscillator and System Clock
      3. 8.9.3  Power-Management Module (PMM)
      4. 8.9.4  Hardware Multiplier (MPY)
      5. 8.9.5  Real-Time Clock (RTC_A)
      6. 8.9.6  Watchdog Timer (WDT_A)
      7. 8.9.7  System Module (SYS)
      8. 8.9.8  DMA Controller
      9. 8.9.9  Universal Serial Communication Interface (USCI)
      10. 8.9.10 TA0
      11. 8.9.11 TA1
      12. 8.9.12 TB0
      13. 8.9.13 ADC12_A
      14. 8.9.14 CRC16
      15. 8.9.15 REF Voltage Reference
      16. 8.9.16 Embedded Emulation Module (EEM) (L Version)
      17. 8.9.17 Peripheral File Map
    10. 8.10 Input/Output Schematics
      1. 8.10.1  Port P1, P1.0 to P1.7, Input/Output With Schmitt Trigger
      2. 8.10.2  Port P2, P2.0 to P2.7, Input/Output With Schmitt Trigger
      3. 8.10.3  Port P3, P3.0 to P3.7, Input/Output With Schmitt Trigger
      4. 8.10.4  Port P4, P4.0 to P4.7, Input/Output With Schmitt Trigger
      5. 8.10.5  Port P5, P5.0 and P5.1, Input/Output With Schmitt Trigger
      6. 8.10.6  Port P5, P5.2, Input/Output With Schmitt Trigger
      7. 8.10.7  Port P5, P5.3, Input/Output With Schmitt Trigger
      8. 8.10.8  Port P5, P5.4 to P5.7, Input/Output With Schmitt Trigger
      9. 8.10.9  Port P6, P6.0 to P6.7, Input/Output With Schmitt Trigger
      10. 8.10.10 Port P7, P7.0, Input/Output With Schmitt Trigger
      11. 8.10.11 Port P7, P7.1, Input/Output With Schmitt Trigger
      12. 8.10.12 Port P7, P7.2 and P7.3, Input/Output With Schmitt Trigger
      13. 8.10.13 Port P7, P7.4 to P7.7, Input/Output With Schmitt Trigger
      14. 8.10.14 Port P8, P8.0 to P8.7, Input/Output With Schmitt Trigger
      15. 8.10.15 Port P9, P9.0 to P9.7, Input/Output With Schmitt Trigger
      16. 8.10.16 Port P10, P10.0 to P10.7, Input/Output With Schmitt Trigger
      17. 8.10.17 Port P11, P11.0 to P11.2, Input/Output With Schmitt Trigger
      18. 8.10.18 Port J, J.0 JTAG Pin TDO, Input/Output With Schmitt Trigger or Output
      19. 8.10.19 Port J, J.1 to J.3 JTAG Pins TMS, TCK, TDI/TCLK, Input/Output With Schmitt Trigger or Output
    11. 8.11 Device Descriptors (TLV)
  9. 9Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Getting Started and Next Steps
      2. 9.1.2 Development Tools Support
        1. Hardware Features
        2. Recommended Hardware Options
          1. Experimenter Boards
          2. Debugging and Programming Tools
          3. Production Programmers
        3. Recommended Software Options
          1. Integrated Development Environments
          2. MSP430Ware
          3. TI-RTOS
          4. Command-Line Programmer
      3. 9.1.3 Device Nomenclature
    2. 9.2 Documentation Support
    3. 9.3 Support Resources
    4. 9.4 Trademarks
    5. 9.5 Electrostatic Discharge Caution
    6. 9.6 Export Control Notice
    7. 9.7 Glossary

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Peripheral File Map

Table 8-11 lists the base address for the registers of each module.

Table 8-11 Peripheral Map
Special Functions (see Table 8-12)0100h000h-01Fh
PMM (see Table 8-13)0120h000h-010h
Flash Control (see Table 8-14)0140h000h-00Fh
CRC16 (see Table 8-15)0150h000h-007h
RAM Control (see Table 8-16)0158h000h-001h
Watchdog (see Table 8-17)015Ch000h-001h
UCS (see Table 8-18)0160h000h-01Fh
SYS (see Table 8-19)0180h000h-01Fh
Shared Reference (see Table 8-20)01B0h000h-001h
Port P1, P2 (see Table 8-21)0200h000h-01Fh
Port P3, P4 (see Table 8-22)0220h000h-00Bh
Port P5, P6 (see Table 8-23)0240h000h-00Bh
Port P7, P8 (see Table 8-24)0260h000h-00Bh
Port P9, P10 (see Table 8-25)0280h000h-00Bh
Port P11 (see Table 8-26)02A0h000h-00Ah
Port PJ (see Table 8-27)0320h000h-01Fh
TA0 (see Table 8-28)0340h000h-02Eh
TA1 (see Table 8-29)0380h000h-02Eh
TB0 (see Table 8-30)03C0h000h-02Eh
Real-Time Clock (RTC_A) (see Table 8-31)04A0h000h-01Bh
32-Bit Hardware Multiplier (see Table 8-32)04C0h000h-02Fh
DMA General Control (see Table 8-33)0500h000h-00Fh
DMA Channel 0 (see Table 8-33)0510h000h-00Ah
DMA Channel 1 (see Table 8-33)0520h000h-00Ah
DMA Channel 2 (see Table 8-33)0530h000h-00Ah
USCI_A0 (see Table 8-34)05C0h000h-01Fh
USCI_B0 (see Table 8-35)05E0h000h-01Fh
USCI_A1 (see Table 8-36)0600h000h-01Fh
USCI_B1 (see Table 8-37)0620h000h-01Fh
USCI_A2 (see Table 8-38)0640h000h-01Fh
USCI_B2 (see Table 8-39)0660h000h-01Fh
USCI_A3 (see Table 8-40)0680h000h-01Fh
USCI_B3 (see Table 8-41)06A0h000h-01Fh
ADC12_A (see Table 8-42)0700h000h-03Eh
Table 8-12 Special Function Registers (Base Address: 0100h)
SFR interrupt enableSFRIE100h
SFR interrupt flagSFRIFG102h
SFR reset pin controlSFRRPCR04h
Table 8-13 PMM Registers (Base Address: 0120h)
PMM Control 0PMMCTL000h
PMM control 1PMMCTL102h
SVS high side controlSVSMHCTL04h
SVS low side controlSVSMLCTL06h
PMM interrupt flagsPMMIFG0Ch
PMM interrupt enablePMMIE0Eh
PMM power mode 5 controlPM5CTL010h
Table 8-14 Flash Control Registers (Base Address: 0140h)
Flash control 1FCTL100h
Flash control 3FCTL304h
Flash control 4FCTL406h
Table 8-15 CRC16 Registers (Base Address: 0150h)
CRC data inputCRC16DI00h
CRC data input reverse byteCRCDIRB02h
CRC initialization and resultCRCINIRES04h
CRC result reverse byteCRCRESR06h
Table 8-16 RAM Control Registers (Base Address: 0158h)
RAM control 0RCCTL000h
Table 8-17 Watchdog Registers (Base Address: 015Ch)
Watchdog timer controlWDTCTL00h
Table 8-18 UCS Registers (Base Address: 0160h)
UCS control 0UCSCTL000h
UCS control 1UCSCTL102h
UCS control 2UCSCTL204h
UCS control 3UCSCTL306h
UCS control 4UCSCTL408h
UCS control 5UCSCTL50Ah
UCS control 6UCSCTL60Ch
UCS control 7UCSCTL70Eh
UCS control 8UCSCTL810h
Table 8-19 SYS Registers (Base Address: 0180h)
System controlSYSCTL00h
Bootstrap loader configuration areaSYSBSLC02h
JTAG mailbox controlSYSJMBC06h
JTAG mailbox input 0SYSJMBI008h
JTAG mailbox input 1SYSJMBI10Ah
JTAG mailbox output 0SYSJMBO00Ch
JTAG mailbox output 1SYSJMBO10Eh
Bus Error vector generatorSYSBERRIV18h
User NMI vector generatorSYSUNIV1Ah
System NMI vector generatorSYSSNIV1Ch
Reset vector generatorSYSRSTIV1Eh
Table 8-20 Shared Reference Registers (Base Address: 01B0h)
Shared reference controlREFCTL00h
Table 8-21 Port P1, P2 Registers (Base Address: 0200h)
Port P1 inputP1IN00h
Port P1 outputP1OUT02h
Port P1 directionP1DIR04h
Port P1 pullup/pulldown enableP1REN06h
Port P1 drive strengthP1DS08h
Port P1 selectionP1SEL0Ah
Port P1 interrupt vector wordP1IV0Eh
Port P1 interrupt edge selectP1IES18h
Port P1 interrupt enableP1IE1Ah
Port P1 interrupt flagP1IFG1Ch
Port P2 inputP2IN01h
Port P2 outputP2OUT03h
Port P2 directionP2DIR05h
Port P2 pullup/pulldown enableP2REN07h
Port P2 drive strengthP2DS09h
Port P2 selectionP2SEL0Bh
Port P2 interrupt vector wordP2IV1Eh
Port P2 interrupt edge selectP2IES19h
Port P2 interrupt enableP2IE1Bh
Port P2 interrupt flagP2IFG1Dh
Table 8-22 Port P3, P4 Registers (Base Address: 0220h)
Port P3 inputP3IN00h
Port P3 outputP3OUT02h
Port P3 directionP3DIR04h
Port P3 pullup/pulldown enableP3REN06h
Port P3 drive strengthP3DS08h
Port P3 selectionP3SEL0Ah
Port P4 inputP4IN01h
Port P4 outputP4OUT03h
Port P4 directionP4DIR05h
Port P4 pullup/pulldown enableP4REN07h
Port P4 drive strengthP4DS09h
Port P4 selectionP4SEL0Bh
Table 8-23 Port P5, P6 Registers (Base Address: 0240h)
Port P5 inputP5IN00h
Port P5 outputP5OUT02h
Port P5 directionP5DIR04h
Port P5 pullup/pulldown enableP5REN06h
Port P5 drive strengthP5DS08h
Port P5 selectionP5SEL0Ah
Port P6 inputP6IN01h
Port P6 outputP6OUT03h
Port P6 directionP6DIR05h
Port P6 pullup/pulldown enableP6REN07h
Port P6 drive strengthP6DS09h
Port P6 selectionP6SEL0Bh
Table 8-24 Port P7, P8 Registers (Base Address: 0260h)
Port P7 inputP7IN00h
Port P7 outputP7OUT02h
Port P7 directionP7DIR04h
Port P7 pullup/pulldown enableP7REN06h
Port P7 drive strengthP7DS08h
Port P7 selectionP7SEL0Ah
Port P8 inputP8IN01h
Port P8 outputP8OUT03h
Port P8 directionP8DIR05h
Port P8 pullup/pulldown enableP8REN07h
Port P8 drive strengthP8DS09h
Port P8 selectionP8SEL0Bh
Table 8-25 Port P9, P10 Registers (Base Address: 0280h)
Port P9 inputP9IN00h
Port P9 outputP9OUT02h
Port P9 directionP9DIR04h
Port P9 pullup/pulldown enableP9REN06h
Port P9 drive strengthP9DS08h
Port P9 selectionP9SEL0Ah
Port P10 inputP10IN01h
Port P10 outputP10OUT03h
Port P10 directionP10DIR05h
Port P10 pullup/pulldown enableP10REN07h
Port P10 drive strengthP10DS09h
Port P10 selectionP10SEL0Bh
Table 8-26 Port P11 Registers (Base Address: 02A0h)
Port P11 inputP11IN00h
Port P11 outputP11OUT02h
Port P11 directionP11DIR04h
Port P11 pullup/pulldown enableP11REN06h
Port P11 drive strengthP11DS08h
Port P11 selectionP11SEL0Ah
Table 8-27 Port J Registers (Base Address: 0320h)
Port PJ inputPJIN00h
Port PJ outputPJOUT02h
Port PJ directionPJDIR04h
Port PJ pullup/pulldown enablePJREN06h
Port PJ drive strengthPJDS08h
Table 8-28 TA0 Registers (Base Address: 0340h)
TA0 controlTA0CTL00h
Capture/compare control 0TA0CCTL002h
Capture/compare control 1TA0CCTL104h
Capture/compare control 2TA0CCTL206h
Capture/compare control 3TA0CCTL308h
Capture/compare control 4TA0CCTL40Ah
TA0 counter registerTA0R10h
Capture/compare register 0TA0CCR012h
Capture/compare register 1TA0CCR114h
Capture/compare register 2TA0CCR216h
Capture/compare register 3TA0CCR318h
Capture/compare register 4TA0CCR41Ah
TA0 expansion register 0TA0EX020h
TA0 interrupt vectorTA0IV2Eh
Table 8-29 TA1 Registers (Base Address: 0380h)
TA1 controlTA1CTL00h
Capture/compare control 0TA1CCTL002h
Capture/compare control 1TA1CCTL104h
Capture/compare control 2TA1CCTL206h
TA1 counter registerTA1R10h
Capture/compare register 0TA1CCR012h
Capture/compare register 1TA1CCR114h
Capture/compare register 2TA1CCR216h
TA1 expansion register 0TA1EX020h
TA1 interrupt vectorTA1IV2Eh
Table 8-30 TB0 Registers (Base Address: 03C0h)
TB0 controlTB0CTL00h
Capture/compare control 0TB0CCTL002h
Capture/compare control 1TB0CCTL104h
Capture/compare control 2TB0CCTL206h
Capture/compare control 3TB0CCTL308h
Capture/compare control 4TB0CCTL40Ah
Capture/compare control 5TB0CCTL50Ch
Capture/compare control 6TB0CCTL60Eh
TB0 registerTB0R10h
Capture/compare register 0TB0CCR012h
Capture/compare register 1TB0CCR114h
Capture/compare register 2TB0CCR216h
Capture/compare register 3TB0CCR318h
Capture/compare register 4TB0CCR41Ah
Capture/compare register 5TB0CCR51Ch
Capture/compare register 6TB0CCR61Eh
TB0 expansion register 0TB0EX020h
TB0 interrupt vectorTB0IV2Eh
Table 8-31 Real-Time Clock Registers (Base Address: 04A0h)
RTC control 0RTCCTL000h
RTC control 1RTCCTL101h
RTC control 2RTCCTL202h
RTC control 3RTCCTL303h
RTC prescaler 0 controlRTCPS0CTL08h
RTC prescaler 1 controlRTCPS1CTL0Ah
RTC prescaler 0RTCPS00Ch
RTC prescaler 1RTCPS10Dh
RTC interrupt vector wordRTCIV0Eh
RTC seconds/counter register 1RTCSEC/RTCNT110h
RTC minutes/counter register 2RTCMIN/RTCNT211h
RTC hours/counter register 3RTCHOUR/RTCNT312h
RTC day of week/counter register 4RTCDOW/RTCNT413h
RTC monthRTCMON15h
RTC year lowRTCYEARL16h
RTC year highRTCYEARH17h
RTC alarm minutesRTCAMIN18h
RTC alarm hoursRTCAHOUR19h
RTC alarm day of weekRTCADOW1Ah
RTC alarm daysRTCADAY1Bh
Table 8-32 32-Bit Hardware Multiplier Registers (Base Address: 04C0h)
16-bit operand 1 – multiplyMPY00h
16-bit operand 1 – signed multiplyMPYS02h
16-bit operand 1 – multiply accumulateMAC04h
16-bit operand 1 – signed multiply accumulateMACS06h
16-bit operand 2OP208h
16 × 16 result low wordRESLO0Ah
16 × 16 result high wordRESHI0Ch
16 × 16 sum extension registerSUMEXT0Eh
32-bit operand 1 – multiply low wordMPY32L10h
32-bit operand 1 – multiply high wordMPY32H12h
32-bit operand 1 – signed multiply low wordMPYS32L14h
32-bit operand 1 – signed multiply high wordMPYS32H16h
32-bit operand 1 – multiply accumulate low wordMAC32L18h
32-bit operand 1 – multiply accumulate high wordMAC32H1Ah
32-bit operand 1 – signed multiply accumulate low wordMACS32L1Ch
32-bit operand 1 – signed multiply accumulate high wordMACS32H1Eh
32-bit operand 2 – low wordOP2L20h
32-bit operand 2 – high wordOP2H22h
32 × 32 result 0 – least significant wordRES024h
32 × 32 result 1RES126h
32 × 32 result 2RES228h
32 × 32 result 3 – most significant wordRES32Ah
MPY32 control register 0MPY32CTL02Ch
Table 8-33 DMA Registers (Base Address DMA General Control: 0500h,
DMA Channel 0: 0510h, DMA Channel 1: 0520h, DMA Channel 2: 0530h)
DMA channel 0 controlDMA0CTL00h
DMA channel 0 source address lowDMA0SAL02h
DMA channel 0 source address highDMA0SAH04h
DMA channel 0 destination address lowDMA0DAL06h
DMA channel 0 destination address highDMA0DAH08h
DMA channel 0 transfer sizeDMA0SZ0Ah
DMA channel 1 controlDMA1CTL00h
DMA channel 1 source address lowDMA1SAL02h
DMA channel 1 source address highDMA1SAH04h
DMA channel 1 destination address lowDMA1DAL06h
DMA channel 1 destination address highDMA1DAH08h
DMA channel 1 transfer sizeDMA1SZ0Ah
DMA channel 2 controlDMA2CTL00h
DMA channel 2 source address lowDMA2SAL02h
DMA channel 2 source address highDMA2SAH04h
DMA channel 2 destination address lowDMA2DAL06h
DMA channel 2 destination address highDMA2DAH08h
DMA channel 2 transfer sizeDMA2SZ0Ah
DMA module control 0DMACTL000h
DMA module control 1DMACTL102h
DMA module control 2DMACTL204h
DMA module control 3DMACTL306h
DMA module control 4DMACTL408h
DMA interrupt vectorDMAIV0Eh
Table 8-34 USCI_A0 Registers (Base Address: 05C0h)
USCI control 1UCA0CTL100h
USCI control 0UCA0CTL001h
USCI baud rate 0UCA0BR006h
USCI baud rate 1UCA0BR107h
USCI modulation controlUCA0MCTL08h
USCI receive bufferUCA0RXBUF0Ch
USCI transmit bufferUCA0TXBUF0Eh
USCI IrDA transmit controlUCA0IRTCTL12h
USCI IrDA receive controlUCA0IRRCTL13h
USCI interrupt enableUCA0IE1Ch
USCI interrupt flagsUCA0IFG1Dh
USCI interrupt vector wordUCA0IV1Eh
Table 8-35 USCI_B0 Registers (Base Address: 05E0h)
USCI synchronous control 1UCB0CTL100h
USCI synchronous control 0UCB0CTL001h
USCI synchronous bit rate 0UCB0BR006h
USCI synchronous bit rate 1UCB0BR107h
USCI synchronous statusUCB0STAT0Ah
USCI synchronous receive bufferUCB0RXBUF0Ch
USCI synchronous transmit bufferUCB0TXBUF0Eh
USCI I2C own addressUCB0I2COA10h
USCI I2C slave addressUCB0I2CSA12h
USCI interrupt enableUCB0IE1Ch
USCI interrupt flagsUCB0IFG1Dh
USCI interrupt vector wordUCB0IV1Eh
Table 8-36 USCI_A1 Registers (Base Address: 0600h)
USCI control 1UCA1CTL100h
USCI control 0UCA1CTL001h
USCI baud rate 0UCA1BR006h
USCI baud rate 1UCA1BR107h
USCI modulation controlUCA1MCTL08h
USCI receive bufferUCA1RXBUF0Ch
USCI transmit bufferUCA1TXBUF0Eh
USCI IrDA transmit controlUCA1IRTCTL12h
USCI IrDA receive controlUCA1IRRCTL13h
USCI interrupt enableUCA1IE1Ch
USCI interrupt flagsUCA1IFG1Dh
USCI interrupt vector wordUCA1IV1Eh
Table 8-37 USCI_B1 Registers (Base Address: 0620h)
USCI synchronous control 1UCB1CTL100h
USCI synchronous control 0UCB1CTL001h
USCI synchronous bit rate 0UCB1BR006h
USCI synchronous bit rate 1UCB1BR107h
USCI synchronous statusUCB1STAT0Ah
USCI synchronous receive bufferUCB1RXBUF0Ch
USCI synchronous transmit bufferUCB1TXBUF0Eh
USCI I2C own addressUCB1I2COA10h
USCI I2C slave addressUCB1I2CSA12h
USCI interrupt enableUCB1IE1Ch
USCI interrupt flagsUCB1IFG1Dh
USCI interrupt vector wordUCB1IV1Eh
Table 8-38 USCI_A2 Registers (Base Address: 0640h)
USCI control 1UCA2CTL100h
USCI control 0UCA2CTL001h
USCI baud rate 0UCA2BR006h
USCI baud rate 1UCA2BR107h
USCI modulation controlUCA2MCTL08h
USCI receive bufferUCA2RXBUF0Ch
USCI transmit bufferUCA2TXBUF0Eh
USCI IrDA transmit controlUCA2IRTCTL12h
USCI IrDA receive controlUCA2IRRCTL13h
USCI interrupt enableUCA2IE1Ch
USCI interrupt flagsUCA2IFG1Dh
USCI interrupt vector wordUCA2IV1Eh
Table 8-39 USCI_B2 Registers (Base Address: 0660h)
USCI synchronous control 1UCB2CTL100h
USCI synchronous control 0UCB2CTL001h
USCI synchronous bit rate 0UCB2BR006h
USCI synchronous bit rate 1UCB2BR107h
USCI synchronous statusUCB2STAT0Ah
USCI synchronous receive bufferUCB2RXBUF0Ch
USCI synchronous transmit bufferUCB2TXBUF0Eh
USCI I2C own addressUCB2I2COA10h
USCI I2C slave addressUCB2I2CSA12h
USCI interrupt enableUCB2IE1Ch
USCI interrupt flagsUCB2IFG1Dh
USCI interrupt vector wordUCB2IV1Eh
Table 8-40 USCI_A3 Registers (Base Address: 0680h)
USCI control 1UCA3CTL100h
USCI control 0UCA3CTL001h
USCI baud rate 0UCA3BR006h
USCI baud rate 1UCA3BR107h
USCI modulation controlUCA3MCTL08h
USCI receive bufferUCA3RXBUF0Ch
USCI transmit bufferUCA3TXBUF0Eh
USCI IrDA transmit controlUCA3IRTCTL12h
USCI IrDA receive controlUCA3IRRCTL13h
USCI interrupt enableUCA3IE1Ch
USCI interrupt flagsUCA3IFG1Dh
USCI interrupt vector wordUCA3IV1Eh
Table 8-41 USCI_B3 Registers (Base Address: 06A0h)
USCI synchronous control 1UCB3CTL100h
USCI synchronous control 0UCB3CTL001h
USCI synchronous bit rate 0UCB3BR006h
USCI synchronous bit rate 1UCB3BR107h
USCI synchronous statusUCB3STAT0Ah
USCI synchronous receive bufferUCB3RXBUF0Ch
USCI synchronous transmit bufferUCB3TXBUF0Eh
USCI I2C own addressUCB3I2COA10h
USCI I2C slave addressUCB3I2CSA12h
USCI interrupt enableUCB3IE1Ch
USCI interrupt flagsUCB3IFG1Dh
USCI interrupt vector wordUCB3IV1Eh
Table 8-42 ADC12_A Registers (Base Address: 0700h)
Control register 0ADC12CTL000h
Control register 1ADC12CTL102h
Control register 2ADC12CTL204h
Interrupt-flag registerADC12IFG0Ah
Interrupt-enable registerADC12IE0Ch
Interrupt-vector-word registerADC12IV0Eh
ADC memory-control register 0ADC12MCTL010h
ADC memory-control register 1ADC12MCTL111h
ADC memory-control register 2ADC12MCTL212h
ADC memory-control register 3ADC12MCTL313h
ADC memory-control register 4ADC12MCTL414h
ADC memory-control register 5ADC12MCTL515h
ADC memory-control register 6ADC12MCTL616h
ADC memory-control register 7ADC12MCTL717h
ADC memory-control register 8ADC12MCTL818h
ADC memory-control register 9ADC12MCTL919h
ADC memory-control register 10ADC12MCTL101Ah
ADC memory-control register 11ADC12MCTL111Bh
ADC memory-control register 12ADC12MCTL121Ch
ADC memory-control register 13ADC12MCTL131Dh
ADC memory-control register 14ADC12MCTL141Eh
ADC memory-control register 15ADC12MCTL151Fh
Conversion memory 0ADC12MEM020h
Conversion memory 1ADC12MEM122h
Conversion memory 2ADC12MEM224h
Conversion memory 3ADC12MEM326h
Conversion memory 4ADC12MEM428h
Conversion memory 5ADC12MEM52Ah
Conversion memory 6ADC12MEM62Ch
Conversion memory 7ADC12MEM72Eh
Conversion memory 8ADC12MEM830h
Conversion memory 9ADC12MEM932h
Conversion memory 10ADC12MEM1034h
Conversion memory 11ADC12MEM1136h
Conversion memory 12ADC12MEM1238h
Conversion memory 13ADC12MEM133Ah
Conversion memory 14ADC12MEM143Ch
Conversion memory 15ADC12MEM153Eh