SLVSCN6A November   2014  – December 2014 MSP430FR5739-EP

PRODUCTION DATA.  

  1. 1Device Overview
    1. 1.1 Features
    2. 1.2 Applications
    3. 1.3 Description
    4. 1.4 Functional Block Diagram
  2. 2Revision History
  3. 3Pin Configuration and Functions
    1. 3.1 Pin Diagram
    2. 3.2 Signal Descriptions
  4. 4Specifications
    1. 4.1  Absolute Maximum Ratings
    2. 4.2  Recommended Operating Conditions
    3. 4.3  Thermal Information
    4. 4.4  Active Mode Supply Current Into VCC Excluding External Current
    5. 4.5  Low-Power Mode Supply Currents (Into VCC) Excluding External Current
    6. 4.6  Schmitt-Trigger Inputs - General Purpose I/O (P1.0 to P1.7, P2.0 to P2.7, P3.0 to P3.7, P4.0 to P4.1, PJ.0 to PJ.5, RST/NMI)
    7. 4.7  Inputs - Ports P1 and P2 (P1.0 to P1.7, P2.0 to P2.7)
    8. 4.8  Leakage Current - General Purpose I/O (P1.0 to P1.7, P2.0 to P2.7, P3.0 to P3.7, P4.0 to P4.1, PJ.0 to PJ.5, RST/NMI)
    9. 4.9  Outputs - General Purpose I/O (P1.0 to P1.7, P2.0 to P2.7, P3.0 to P3.7, P4.0 to P4.1, PJ.0 to PJ.5)
    10. 4.10 Output Frequency - General Purpose I/O (P1.0 to P1.7, P2.0 to P2.7, P3.0 to P3.7, P4.0 to P4.1, PJ.0 to PJ.5)
    11. 4.11 Typical Characteristics - Outputs
    12. 4.12 Crystal Oscillator, XT1, Low-Frequency (LF) Mode
    13. 4.13 Crystal Oscillator, XT1, High-Frequency (HF) Mode
    14. 4.14 Internal Very-Low-Power Low-Frequency Oscillator (VLO)
    15. 4.15 DCO Frequencies
    16. 4.16 MODOSC
    17. 4.17 PMM, Core Voltage
    18. 4.18 PMM, SVS, BOR
    19. 4.19 Wake-Up from Low Power Modes
    20. 4.20 Timer_A
    21. 4.21 Timer_B
    22. 4.22 eUSCI (UART Mode) Recommended Operating Conditions
    23. 4.23 eUSCI (UART Mode)
    24. 4.24 eUSCI (SPI Master Mode) Recommended Operating Conditions
    25. 4.25 eUSCI (SPI Master Mode)
    26. 4.26 eUSCI (SPI Slave Mode)
    27. 4.27 eUSCI (I2C Mode)
    28. 4.28 10-Bit ADC, Power Supply and Input Range Conditions
    29. 4.29 10-Bit ADC, Timing Parameters
    30. 4.30 10-Bit ADC, Linearity Parameters
    31. 4.31 REF, External Reference
    32. 4.32 REF, Built-In Reference
    33. 4.33 REF, Temperature Sensor and Built-In VMID
    34. 4.34 Comparator_D
    35. 4.35 FRAM
    36. 4.36 JTAG and Spy-Bi-Wire Interface
  5. 5Detailed Description
    1. 5.1  Functional Block Diagram
    2. 5.2  CPU
    3. 5.3  Operating Modes
    4. 5.4  Interrupt Vector Addresses
    5. 5.5  Memory Organization
    6. 5.6  Bootstrap Loader (BSL)
    7. 5.7  JTAG Operation
      1. 5.7.1 JTAG Standard Interface
      2. 5.7.2 Spy-Bi-Wire Interface
    8. 5.8  FRAM
    9. 5.9  Memory Protection Unit (MPU)
    10. 5.10 Peripherals
      1. 5.10.1  Digital I/O
      2. 5.10.2  Oscillator and Clock System (CS)
      3. 5.10.3  Power Management Module (PMM)
      4. 5.10.4  Hardware Multiplier (MPY)
      5. 5.10.5  Real-Time Clock (RTC_B)
      6. 5.10.6  Watchdog Timer (WDT_A)
      7. 5.10.7  System Module (SYS)
      8. 5.10.8  DMA Controller
      9. 5.10.9  Enhanced Universal Serial Communication Interface (eUSCI)
      10. 5.10.10 TA0, TA1
      11. 5.10.11 TB0, TB1, TB2
      12. 5.10.12 ADC10_B
      13. 5.10.13 Comparator_D
      14. 5.10.14 CRC16
      15. 5.10.15 Shared Reference (REF)
      16. 5.10.16 Embedded Emulation Module (EEM)
      17. 5.10.17 Peripheral File Map
  6. 6Input/Output Schematics
    1. 6.1  Port P1, P1.0 to P1.2, Input/Output With Schmitt Trigger
    2. 6.2  Port P1, P1.3 to P1.5, Input/Output With Schmitt Trigger
    3. 6.3  Port P1, P1.6 to P1.7, Input/Output With Schmitt Trigger
    4. 6.4  Port P2, P2.0 to P2.2, Input/Output With Schmitt Trigger
    5. 6.5  Port P2, P2.3 to P2.4, Input/Output With Schmitt Trigger
    6. 6.6  Port P2, P2.5 to P2.6, Input/Output With Schmitt Trigger
    7. 6.7  Port P2, P2.7, Input/Output With Schmitt Trigger
    8. 6.8  Port P3, P3.0 to P3.3, Input/Output With Schmitt Trigger
    9. 6.9  Port P3, P3.4 to P3.6, Input/Output With Schmitt Trigger
    10. 6.10 Port P3, P3.7, Input/Output With Schmitt Trigger
    11. 6.11 Port P4, P4.0, Input/Output With Schmitt Trigger
    12. 6.12 Port P4, P4.1, Input/Output With Schmitt Trigger
    13. 6.13 Port J, J.0 to J.3 JTAG pins TDO, TMS, TCK, TDI/TCLK, Input/Output With Schmitt Trigger or Output
    14. 6.14 Port PJ, PJ.4 and PJ.5 Input/Output With Schmitt Trigger
  7. 7Device Descriptors (TLV)
  8. 8Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Getting Started
      2. 8.1.2 Development Tools Support
        1. 8.1.2.1 Hardware Features
        2. 8.1.2.2 Recommended Hardware Options
          1. 8.1.2.2.1 Target Socket Boards
          2. 8.1.2.2.2 Experimenter Boards
          3. 8.1.2.2.3 Debugging and Programming Tools
          4. 8.1.2.2.4 Production Programmers
        3. 8.1.2.3 Recommended Software Options
          1. 8.1.2.3.1 Integrated Development Environments
          2. 8.1.2.3.2 MSP430Ware
          3. 8.1.2.3.3 Command-Line Programmer
      3. 8.1.3 Device and Development Tool Nomenclature
    2. 8.2 Documentation Support
    3. 8.3 Community Resources
    4. 8.4 Trademarks
    5. 8.5 Electrostatic Discharge Caution
    6. 8.6 Glossary
  9. 9Mechanical Packaging and Orderable Information
    1. 9.1 Packaging Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

7 Device Descriptors (TLV)

Table 7-1 and Table 7-2 list the complete contents of the device descriptor tag-length-value (TLV) structure for each device type.

Table 7-1 Device Descriptor Table (1)

Description Address FR5739 FR5738 FR5737 FR5736 FR5735
Value Value Value Value Value
Info Block Info length 01A00h 05h 05h 05h 05h 05h
CRC length 01A01h 05h 05h 05h 05h 05h
CRC value 01A02h per unit per unit per unit per unit per unit
01A03h per unit per unit per unit per unit per unit
Device ID 01A04h 03h 02h 01h 77h 76h
Device ID 01A05h 81h 81h 81h 81h 81h
Hardware revision 01A06h per unit per unit per unit per unit per unit
Firmware revision 01A07h per unit per unit per unit per unit per unit
Die Record Die Record Tag 01A08h 08h 08h 08h 08h 08h
Die Record length 01A09h 0Ah 0Ah 0Ah 0Ah 0Ah
Lot/Wafer ID 01A0Ah per unit per unit per unit per unit per unit
01A0Bh per unit per unit per unit per unit per unit
01A0Ch per unit per unit per unit per unit per unit
01A0Dh per unit per unit per unit per unit per unit
Die X position 01A0Eh per unit per unit per unit per unit per unit
01A0Fh per unit per unit per unit per unit per unit
Die Y position 01A10h per unit per unit per unit per unit per unit
01A11h per unit per unit per unit per unit per unit
Test results 01A12h per unit per unit per unit per unit per unit
01A13h per unit per unit per unit per unit per unit
ADC10 Calibration ADC10 Calibration Tag 01A14h 13h 13h 13h 05h 13h
ADC10 Calibration length 01A15h 10h 10h 10h 10h 10h
ADC Gain Factor 01A16h per unit per unit NA NA per unit
01A17h per unit per unit NA NA per unit
ADC Offset 01A18h per unit per unit NA NA per unit
01A19h per unit per unit NA NA per unit
ADC 1.5-V Reference
Temp. Sensor 30°C		 01A1Ah per unit per unit NA NA per unit
01A1Bh per unit per unit NA NA per unit
ADC 1.5-V Reference
Temp. Sensor 85°C		 01A1Ch per unit per unit NA NA per unit
01A1Dh per unit per unit NA NA per unit
ADC 2.0-V Reference
Temp. Sensor 30°C		 01A1Eh per unit per unit NA NA per unit
01A1Fh per unit per unit NA NA per unit
ADC 2.0-V Reference
Temp. Sensor 85°C		 01A20h per unit per unit NA NA per unit
01A21h per unit per unit NA NA per unit
ADC 2.5-V Reference
Temp. Sensor 30°C		 01A22h per unit per unit NA NA per unit
01A23h per unit per unit NA NA per unit
ADC 2.5-V Reference
Temp. Sensor 85°C		 01A24h per unit per unit NA NA per unit
01A25h per unit per unit NA NA per unit
REF Calibration REF Calibration Tag 01A26h 12h 12h 12h 12h 12h
REF Calibration length 01A27h 06h 06h 06h 06h 06h
REF 1.5-V Reference 01A28h per unit per unit per unit per unit per unit
01A29h per unit per unit per unit per unit per unit
REF 2.0-V Reference 01A2Ah per unit per unit per unit per unit per unit
01A2Bh per unit per unit per unit per unit per unit
REF 2.5-V Reference 01A2Ch per unit per unit per unit per unit per unit
01A2Dh per unit per unit per unit per unit per unit
(1) NA = Not applicable

Table 7-2 Device Descriptor Table (1)

Description Address FR5734 FR5733 FR5732 FR5731 FR5730
Value Value Value Value Value
Info Block Info length 01A00h 05h 05h 05h 05h 05h
CRC length 01A01h 05h 05h 05h 05h 05h
CRC value 01A02h per unit per unit per unit per unit per unit
01A03h per unit per unit per unit per unit per unit
Device ID 01A04h 00h 7Fh 75h 7Eh 7Ch
Device ID 01A05h 81h 80h 81h 80h 80h
Hardware revision 01A06h per unit per unit per unit per unit per unit
Firmware revision 01A07h per unit per unit per unit per unit per unit
Die Record Die Record Tag 01A08h 08h 08h 08h 08h 08h
Die Record length 01A09h 0Ah 0Ah 0Ah 0Ah 0Ah
Lot/Wafer ID 01A0Ah per unit per unit per unit per unit per unit
01A0Bh per unit per unit per unit per unit per unit
01A0Ch per unit per unit per unit per unit per unit
01A0Dh per unit per unit per unit per unit per unit
Die X position 01A0Eh per unit per unit per unit per unit per unit
01A0Fh per unit per unit per unit per unit per unit
Die Y position 01A10h per unit per unit per unit per unit per unit
01A11h per unit per unit per unit per unit per unit
Test results 01A12h per unit per unit per unit per unit per unit
01A13h per unit per unit per unit per unit per unit
ADC10 Calibration ADC10 Calibration Tag 01A14h 13h 13h 13h 05h 13h
ADC10 Calibration length 01A15h 10h 10h 10h 10h 10h
ADC Gain Factor 01A16h per unit NA NA per unit per unit
01A17h per unit NA NA per unit per unit
ADC Offset 01A18h per unit NA NA per unit per unit
01A19h per unit NA NA per unit per unit
ADC 1.5-V Reference
Temp. Sensor 30°C		 01A1Ah per unit NA NA per unit per unit
01A1Bh per unit NA NA per unit per unit
ADC 1.5-V Reference
Temp. Sensor 85°C		 01A1Ch per unit NA NA per unit per unit
01A1Dh per unit NA NA per unit per unit
ADC 2.0-V Reference
Temp. Sensor 30°C		 01A1Eh per unit NA NA per unit per unit
01A1Fh per unit NA NA per unit per unit
ADC 2.0-V Reference
Temp. Sensor 85°C		 01A20h per unit NA NA per unit per unit
01A21h per unit NA NA per unit per unit
ADC 2.5-V Reference
Temp. Sensor 30°C		 01A22h per unit NA NA per unit per unit
01A23h per unit NA NA per unit per unit
ADC 2.5-V Reference
Temp. Sensor 85°C		 01A24h per unit NA NA per unit per unit
01A25h per unit NA NA per unit per unit
REF Calibration REF Calibration Tag 01A26h 12h 12h 12h 12h 12h
REF Calibration length 01A27h 06h 06h 06h 06h 06h
REF 1.5-V Reference 01A28h per unit per unit per unit per unit per unit
01A29h per unit per unit per unit per unit per unit
REF 2.0-V Reference 01A2Ah per unit per unit per unit per unit per unit
01A2Bh per unit per unit per unit per unit per unit
REF 2.5-V Reference 01A2Ch per unit per unit per unit per unit per unit
01A2Dh per unit per unit per unit per unit per unit
(1) NA = Not applicable