SLASEK0A December 2017 – March 2018 MSP430FR5969-SP
Table 3-1 lists the correct termination of all unused pins.
|Px.0 to Px.7||Open||Set to port function, output direction (PxDIR.n = 1)|
|RST/NMI||DVCC or VCC||47-kΩ pullup or internal pullup selected with 2.2-nF (10-nF(2)) pulldown|
|Open||The JTAG pins are shared with general-purpose I/O function (PJ.x). If not used as JTAG pins, these pins should be switched to port function, output direction. When used as JTAG pins, these pins should remain open.|
|TEST||Open||This pin always has an internal pulldown enabled.|