TINA™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-TI™ is a free, fully-functional version of the TINA software, preloaded with a library of macro models in addition to a range of both passive and active models. TINA-TI provides all the conventional dc, transient, and frequency domain analysis of SPICE, as well as additional design capabilities.
Available as a free download from the Analog eLab Design Center, TINA-TI offers extensive post-processing capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.
These files require that either the TINA software (from DesignSoft™) or TINA-TI software be installed. Download the free TINA-TI software from the TINA-TI folder.
TI Precision Designs are analog solutions created by TI’s precision analog applications experts and offer the theory of operation, component selection, simulation, complete PCB schematic and layout, bill of materials, and measured performance of many useful circuits. TI Precision Designs are available online at http://www.ti.com/ww/en/analog/precision-designs/.
WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The WEBENCH Filter Designer lets you create optimized filter designs using a selection of TI operational amplifiers and passive components from TI's vendor partners.
Available as a web-based tool from the WEBENCH® Design Center, WEBENCH® Filter Designer allows you to design, optimize, and simulate complete multistage active filter solutions within minutes.
For related documentation, see the following:
Circuit Board Layout Techniques, SLOA089.
Operational Amplifier Gain stability, Part 3: AC Gain-Error Analysis, SLYT383.
Operational Amplifier Gain Stability, Part 2: DC Gain-Error Analysis, SLYT374.
Using infinite-gain, MFB filter topology in fully differential active filters, SLYT343.
Op Amp Performance Analysis, SBOS054.
Single-Supply Operation of Operational Amplifiers, SBOA059.
Tuning in Amplifiers, SBOA067.
Shelf-Life Evaluation of Lead-Free Component Finishes, SZZA046.
See Table 1 for a list of quick access links. Categories include technical documents, support and community resources, tools and software, and quick access to sample or buy.
|PARTS||PRODUCT FOLDER||SAMPLE AND BUY||TECHNICAL DOCUMENTS||TOOLS AND SOFTWARE||SUPPORT AND COMMUNITY|
|OPA376||Click here||Click here||Click here||Click here||Click here|
|OPA2376||Click here||Click here||Click here||Click here||Click here|
|OPA4376||Click here||Click here||Click here||Click here||Click here|
e-trim, TINA-TI, E2E, NanoStar, NanoFree are trademarks of Texas Instruments.
TINA, DesignSoft are trademarks of DesignSoft, Inc.
All other trademarks are the property of their respective owners.
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.