SLLSEV6C July   2017  – February 2021 TIOS101 , TIOS1013 , TIOS1015

PRODUCTION DATA  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Switching Characteristics
    7. 6.7 Typical Characteristics
  7. Parameter Measurement Information
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagrams
    3. 8.3 Feature Description
      1. 8.3.1  Current Limit Configuration
      2. 8.3.2  Current Fault Detection, Indication and Auto Recovery
      3. 8.3.3  Thermal Warning, Thermal Shutdown
      4. 8.3.4  Fault Reporting (NFAULT)
      5. 8.3.5  Device Function Tables
      6. 8.3.6  The Integrated Voltage Regulator (LDO)
      7. 8.3.7  Reverse Polarity Protection
      8. 8.3.8  Integrated Surge Protection and Transient Waveform Tolerance
      9. 8.3.9  Power Up Sequence
      10. 8.3.10 Undervoltage Lock-Out (UVLO)
    4. 8.4 Device Functional Modes
      1. 8.4.1 NPN Configuration (N-Switch Mode)
      2. 8.4.2 PNP Configuration (P-Switch Mode)
      3. 8.4.3 Push-Pull Mode
  9. Application Information Disclaimer
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Maximum Junction Temperature Check
        2. 9.2.2.2 Driving Capacitive Loads
        3. 9.2.2.3 Driving Inductive Loads
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Receiving Notification of Documentation Updates
    2. 12.2 Support Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)
PARAMETERTEST CONDITIONSMINTYPMAXUNIT
POWER SUPPLIES (VCC)
I(VCC)Quiescent supply currentEN = LOW, no load1.52.2mA
EN = HIGH, no load22.7mA
LOGIC-LEVEL INPUTS (EN, IN)
VILInput logic low voltage0.8V
VIHInput logic high voltage2V
RPDPull-down (EN) resistance100
RPUPull-up (IN) resistance200
CONTROL OUTPUT (NFAULT)
VOLOutput logic low voltageIO = 4 mA0.5V
IOZOutput high impedance leakageOutput in Hi-Z, VO = 0 V or VCC_IN/OUT–11µA
DRIVER OUTPUT (OUT)
VDS(ON)High-side driver residual voltageI = 250 mA1.75V
I = 200 mA1.5V
I = 100 mA1.1V
Low-side driver residual voltageI = 250 mA1.75V
I = 200 mA1.5V
I = 100 mA1.1V
IPOUT pull-up/down currentEN = LOW, IN = LOW, pull-down current405080µA
EN = LOW, IN = HIGH, pull-up current405080µA
IO(LIM)Driver output current limitRSET = 100 kΩ355070mA
RSET = 0 kΩ300350400mA
RSET = OPEN(1)300350400mA
PROTECTION CIRCUITS
V(UVLO)VCC under voltage lockoutVCC falling; NFAULT = Hi-Z6V
VCC rising; NFAULT = LOW6.5V
V(UVLO,HYS)VCC under voltage hysteresisRising to falling threshold100mV
V(UVLO_IN)VCC_IN under voltage lockout (No LDO option)VCC_IN falling; NFAULT = Hi-Z2.4V
VCC_IN rising; NFAULT = LOW2.5V
V(UVLO,HYS)VCC_IN under voltage hysteresis (No LDO option)Rising to falling threshold100mV
T(WRN)Thermal warningDie temperature TJ125°C
T(SDN)Thermal shutdown150160°C
T(HYS)Thermal hysteresis for shutdown10°C
IREVLeakage current in reverse polarityV(OUT) < V(VCC) or
V(OUT) > V(VCC)
up to |36 V|
50µA
V(OUT) < V(OUT) or
V(OUT) > V(VCC)
up to |60 V|
80µA
EN = HIGH, IN = LOW; V(OUT to VCC) = 3 V550µA
EN = HIGH, IN = HIGH; V(OUT to GND) = -3 V10µA
LINEAR REGULATOR (LDO)
V(VCC_OUT)Voltage regulator outputTIOS10154.7555.25V
TIOS10133.133.33.46V
V(DROP)Voltage regulator drop-out voltage
(V(VCC) – V(VCC_OUT))
ICC = 20 mA load currentTIOS10151.9V
TIOS10132.3V
REGLine regulation (dV(VCC_OUT)/dV(VCC)I(VCC_OUT) = 1 mA1.7mV/V
LREGLoad regulation (dV(VCC_OUT)/V(VCC_OUT))V(VCC) = 24 V, I(VCC_OUT) = 100 µA to 20 mA1%
PSSRPower Supply Rejection Ratio100 kHz, I(VCC_OUT) = 20 mA40dB
Current fault indication will be active. Current fault auto recovery will be de-activated.