SLYS037A March   2023  – March 2024 TMAG6180-Q1

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Magnetic Characteristics
    7. 5.7 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Magnetic Flux Direction
      2. 6.3.2 Sensors Location and Placement Tolerances
      3. 6.3.3 Magnetic Response
      4. 6.3.4 Parameters Definition
        1. 6.3.4.1 AMR Output Parameters
        2. 6.3.4.2 Transient Parameters
          1. 6.3.4.2.1 Power-On Time
        3. 6.3.4.3 Angle Accuracy Parameters
        4. 6.3.4.4 Hall Sensor Parameters
      5. 6.3.5 Automatic Gain Control (AGC)
      6. 6.3.6 Safety and Diagnostics
        1. 6.3.6.1 Device Level Checks
        2. 6.3.6.2 System Level Checks
    4. 6.4 Device Functional Modes
      1. 6.4.1 Operating Modes
        1. 6.4.1.1 Active Mode
        2. 6.4.1.2 Fault Mode
  8. 7 Application and Implementation
    1. 7.1 Application Information
      1. 7.1.1 Power Supply as the Reference for External ADC
      2. 7.1.2 AMR Output Dependence on Airgap Distance
      3. 7.1.3 Calibration of Sensor Errors
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Extending the Angle Range to 360 Degrees
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 Receiving Notification of Documentation Updates
    2. 8.2 Support Resources
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 Glossary
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

5.6 Magnetic Characteristics

over operating free-air temperature range (unless otherwise noted); typical specifications are at TA = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Angular Performance
ANGERR_DYN_SE Angular error linearity across temperature on continuous calibration (gain / offset)  (single ended) B = 30mT, VCC = 3.3V, Magnetic field Rotation Speed = 1000rpm 0.1 0.35
deg
 
B = 30mT, VCC = 5V, Magnetic field Rotation Speed = 1000rpm 0.1 0.56
deg
 
ANGERR_DYN_DE Angular error linearity across temperature on continuous calibration (gain / offset)  (differential ended) B = 30mT, VCC = 3.3V, Magnetic field Rotation Speed = 1000rpm 0.1 0.4
deg
 
B = 30mT, VCC = 5V, Magnetic field Rotation Speed = 1000rpm 0.1 0.56
deg
 
ANGERR_RTCAL_SE Angular error linearity across temperature after room temperature calibration (of offset / gain mismatch)  (single ended) B = 30mT, VCC = 3.3V, Ideal magnet alignment  0.1 1.1 deg
B = 30mT, VCC = 5V, Ideal magnet alignment 0.1 1.1 deg
ANGERR_RTCAL_DE Angular error linearity across temperature after room temperature calibration (of offset / gain mismatch)  (differential ended) B = 30mT, VCC = 3.3V, Ideal magnet alignment 0.2 1.0 deg
B = 30mT, VCC = 5V, Ideal magnet alignment 0.1 0.95 deg
ANGERR_NOCAL_SE Angular error linearity across temperature with no calibration of gain / offset (single ended) B = 30mT, VCC = 3.3V, Ideal magnet alignment 0.5 1.52 deg
B = 30mT, VCC = 5V, Ideal magnet alignment 0.5 1.26 deg
ANGERR_NOCAL_DE Angular error linearity across temperature with no calibration of gain / offset (differential ended) B = 30mT, VCC = 3.3V, Ideal magnet alignment 0.4 1.1 deg
B = 30mT, VCC = 5V, Ideal magnet alignment 0.4 1.0 deg
ANGLT_DRIFT Angle error lifetime drift B = 30mT 0.05 ±0.75 deg
ANGHYST Angle hysteresis error B = 30mT 0.01 0.06 deg
ANGOE_ERR Orthogonality error B = 30mT 0.01 0.051 deg
ANGNOISE Angular RMS (1-sigma) noise in degrees B = 30mT, Cload = 100pF 0.01 0.06 deg
tdel_amr Propagation Delay time Cload = 100pF 1.6 µs
BW3dB_amr 3dB Bandwidth Cload = 100pF 100 KHz
φerr Phase error Magnetic Field Rotation Speed = 10000rpm, Cload = 100pF 0.15 deg
Hall sensor characteristics
BOP(X),BOP(Y) Magnetic field operating point 3 mT
BRP(X),BRP(Y) Magnetic field release point –3 mT
BOP - BRP Magnetic hysteresis 3.5 6 mT
BSYM_OP Operating point symmetry Bop(x) – Bop(y) ±0.5 mT
BSYM_RP Release point symmetry Brp(x) – Brp(y) ±0.5 mT
BSYM_RP Release point symmetry Brp(x) – Brp(y) 0 mT
tPD_HALL Propagation delay time per channel Change in BOP or BRP to change in output 10 μs