SLVSBR3A May   2013  – June 2015 TPS61158

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 EasyScale Timing Requirements
    7. 6.7 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Soft Start-Up
      2. 7.3.2 Shutdown
      3. 7.3.3 Current Program
      4. 7.3.4 Undervoltage Lockout
      5. 7.3.5 Open LED Protection
      6. 7.3.6 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 LED Brightness Dimming Mode Selection
        1. 7.4.1.1 PWM Brightness Dimming
          1. 7.4.1.1.1 Digital 1-Wire Brightness Dimming
          2. 7.4.1.1.2 Easyscale: 1-Wire Digital Dimming
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Inductor Selection
        2. 8.2.2.2 Maximum Output Current
        3. 8.2.2.3 Input and Output Capacitor Selection
      3. 8.2.3 Application Curves
      4. 8.2.4 Additional Application Circuits
        1. 8.2.4.1 TPS61158 To Drive Up To 8 LEDs
        2. 8.2.4.2 TPS61158 to Drive up to 8 LEDs with RC Filter at VIN Pin
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Third-Party Products Disclaimer
    2. 11.2 Community Resources
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

5 Pin Configuration and Functions

DRV Package
6-Pin WSON
Top View
TPS61158 PO_lvsbr3.gif

Pin Functions

PIN I/O DESCRIPTION
NO. NAME
1 CTRL I Control pin of the boost converter. It is a multi-functional pin which can be used for enable control, PWM and digital dimming.
2 VIN I The input supply pin for the device. Connect VIN to a supply voltage between 2.7 V and 5.5 V.
3 VOUT O Output of the boost converter.
4 FB I Feedback pin for current. Connect the sense resistor from FB to GND.
5 GND O Ground
6 LX I This is the switching node of the device. Connect the inductor between the VIN and LX pin.
7 Thermal Pad The thermal pad should be soldered to the analog ground plane. If possible, use thermal via to connect to ground plane for ideal power dissipation.