SBVS204G June   2012  – May 2026

PRODUCTION DATA  

  1.   1
  2. 1 Features
  3. 2 Applications
  4. 3 Description
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 Handling Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Internal Current Limit (ICL)
      2. 6.3.2 Enable (EN) And Under-Voltage Lockout (UVLO)
      3. 6.3.3 Soft-Start And Inrush Current
    4. 6.4 Device Functional Modes
    5. 6.5 Programming
      1. 6.5.1 ANY-OUT Programmable Output Voltage
      2. 6.5.2 Adjustable Operation (TPS7A4701 Only)
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Capacitor Recommendations
          1. 7.2.2.1.1 Input and Output Capacitor Requirements
          2. 7.2.2.1.2 Noise Reduction Capacitor (CNR)
        2. 7.2.2.2 Dropout Voltage (VDO)
        3. 7.2.2.3 Output Voltage Accuracy
        4. 7.2.2.4 Startup
        5. 7.2.2.5 AC Performance
          1. 7.2.2.5.1 Power-Supply Rejection Ratio (PSRR)
          2. 7.2.2.5.2 Load Step Transient Response
          3. 7.2.2.5.3 Noise
      3. 7.2.3 Application Curves
  9. 8 Power Supply Recommendations
    1. 8.1 Power Dissipation (PD)
  10. 9 Layout
    1. 9.1 Layout Guidelines
    2. 9.2 Layout Example
    3. 9.3 Thermal Protection
    4. 9.4 Estimating Junction Temperature
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 Trademarks
    3. 10.3 Electrostatic Discharge Caution
    4. 10.4 Glossary
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

Soft-Start And Inrush Current

Soft-start refers to the ramp-up characteristic of the output voltage during LDO turn-on after EN and UVLO have achieved threshold voltage. The noise reduction capacitor serves a dual purpose of both governing output noise reduction and programming the soft-start ramp during turn-on.

Inrush current is defined as the current through the LDO from IN to OUT during the time of the turn-on ramp up. Inrush current then consists primarily of the sum of load and charge current to the output capacitor. Inrush current can be estimated by Equation 1:

Equation 1. TPS7A4700 TPS7A4701

where:

  • VOUT(t) is the instantaneous output voltage of the turn-on ramp,
  • dVOUT(t)/dt is the slope of the VO ramp, and
  • RLOAD is the resistive load impedance