JAJSGI1 November   2018 DLP4710

PRODUCTION DATA.  

  1. 特長
  2. アプリケーション
  3. 概要
    1.     Device Images
      1.      DLPDLP4710 0.47 1080pチップセット
  4. 改訂履歴
  5. Pin Configuration and Functions
    1.     Pin Functions – Connector Pins
    2.     Pin Functions – Test Pads
  6. Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  Storage Conditions
    3. 6.3  ESD Ratings
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Thermal Information
    6. 6.6  Electrical Characteristics
    7. 6.7  Timing Requirements
    8. 6.8  Switching Characteristics
    9. 6.9  System Mounting Interface Loads
    10. 6.10 Physical Characteristics of the Micromirror Array
    11. 6.11 Micromirror Array Optical Characteristics
    12. 6.12 Window Characteristics
    13. 6.13 Chipset Component Usage Specification
  7. Software Requirements
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Power Interface
      2. 8.3.2 Low-Speed Interface
      3. 8.3.3 High-Speed Interface
      4. 8.3.4 Timing
    4. 8.4 Device Functional Modes
    5. 8.5 Optical Interface and System Image Quality Considerations
      1. 8.5.1 Optical Interface and System Image Quality
        1. 8.5.1.1 Numerical Aperture and Stray Light Control
        2. 8.5.1.2 Pupil Match
        3. 8.5.1.3 Illumination Overfill
    6. 8.6 Micromirror Array Temperature Calculation
    7. 8.7 Micromirror Landed-On/Landed-Off Duty Cycle
      1. 8.7.1 Definition of Micromirror Landed-On/Landed-Off Duty Cycle
      2. 8.7.2 Landed Duty Cycle and Useful Life of the DMD
      3. 8.7.3 Landed Duty Cycle and Operational DMD Temperature
      4. 8.7.4 Estimating the Long-Term Average Landed Duty Cycle of a Product or Application
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
    1. 10.1 Power Supply Power-Up Procedure
    2. 10.2 Power Supply Power-Down Procedure
    3. 10.3 Power Supply Sequencing Requirements
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12デバイスおよびドキュメントのサポート
    1. 12.1 デバイス・サポート
      1. 12.1.1 デバイスの項目表記
      2. 12.1.2 デバイスのマーキング
    2. 12.2 関連リンク
    3. 12.3 コミュニティ・リソース
    4. 12.4 商標
    5. 12.5 静電気放電に関する注意事項
    6. 12.6 Glossary
  13. 13メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

Physical Characteristics of the Micromirror Array

PARAMETER VALUE UNIT
Number of active columns See Figure 15 1920 micromirrors
Number of active rows See Figure 15 1080 micromirrors
ε Micromirror (pixel) pitch See Figure 16 5.4 µm
Micromirror active array width Micromirror pitch × number of active columns; see Figure 15 10.368 mm
Micromirror active array height Micromirror pitch × number of active rows; see Figure 15 5.832 mm
Micromirror active border Pond of micromirror (POM)(1) 20 micromirrors/side
The structure and qualities of the border around the active array includes a band of partially functional micromirrors called the POM. These micromirrors are structurally and/or electrically prevented from tilting toward the bright or ON state, but still require an electrical bias to tilt toward OFF.
DLP4710 15_MicroMirror_Array_Physical_Characteristics.gifFigure 15. Micromirror Array Physical Characteristics
DLP4710 mirror_pixel_pitch_LPS046.gifFigure 16. Mirror (Pixel) Pitch