JAJSIL8A February   2020  – July 2020 LM76005

PRODUCTION DATA  

  1. 特長
  2. アプリケーション
  3. 概要
  4. Revision History
  5. Pin Configuration and Functions
    1.     Pin Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Characteristics
    7. 6.7 Switching Characteristics
    8. 6.8 System Characteristics
    9. 6.9 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Fixed-Frequency, Peak-Current-Mode Control
      2. 7.3.2  Light Load Operation Modes — PFM and FPWM
      3. 7.3.3  Adjustable Output Voltage
      4. 7.3.4  Enable (EN Pin) and UVLO
      5. 7.3.5  Internal LDO, VCC UVLO, and Bias Input
      6. 7.3.6  Soft Start and Voltage Tracking (SS/TRK)
      7. 7.3.7  Adjustable Switching Frequency (RT) and Frequency Synchronization
      8. 7.3.8  Minimum On-Time, Minimum Off-Time, and Frequency Foldback at Dropout Conditions
      9. 7.3.9  Bootstrap Voltage and VBOOT UVLO (BOOT Pin)
      10. 7.3.10 Power Good and Overvoltage Protection (PGOOD)
      11. 7.3.11 Overcurrent and Short-Circuit Protection
      12. 7.3.12 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 Shutdown Mode
      2. 7.4.2 Standby Mode
      3. 7.4.3 Active Mode
      4. 7.4.4 CCM Mode
      5. 7.4.5 DCM Mode
      6. 7.4.6 Light Load Mode
      7. 7.4.7 Foldback Mode
      8. 7.4.8 Forced Pulse-Width-Modulation Mode
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1  Custom Design With WEBENCH® Tools
        2. 8.2.2.2  Output Voltage Setpoint
        3. 8.2.2.3  Switching Frequency
        4. 8.2.2.4  Input Capacitors
        5. 8.2.2.5  Inductor Selection
        6. 8.2.2.6  Output Capacitor Selection
        7. 8.2.2.7  Feedforward Capacitor
        8. 8.2.2.8  Bootstrap Capacitors
        9. 8.2.2.9  VCC Capacitors
        10. 8.2.2.10 BIAS Capacitors
        11. 8.2.2.11 Soft-Start Capacitors
        12. 8.2.2.12 Undervoltage Lockout Setpoint
        13. 8.2.2.13 PGOOD
        14. 8.2.2.14 Synchronization
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
      1. 10.1.1 Layout Highlights
      2. 10.1.2 Compact Layout for EMI Reduction
      3. 10.1.3 Ground Plane and Thermal Considerations
      4. 10.1.4 Feedback Resistors
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Development Support
        1. 11.1.1.1 Custom Design With WEBENCH® Tools
    2. 11.2 ドキュメントの更新通知を受け取る方法
    3. 11.3 サポート・リソース
    4. 11.4 Trademarks
    5. 11.5 静電気放電に関する注意事項
    6. 11.6 サポート・リソース
  12. 12Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

Application Curves

Unless otherwise specified the following conditions apply:
Unless otherwise specified the following conditions apply:GUID-07405D95-19E5-447C-8B3F-B22B0203EF77-low.gif
VOUT = 5 VfSW = 400 kHzAuto Mode
Figure 8-4 LM76005 Efficiency. Unless otherwise specified the following conditions apply:
GUID-F7A138A3-AC49-4152-BA4B-C38A9DA5000D-low.gif
VOUT = 5 VfSW = 400 kHzFPWM Mode
Figure 8-6 LM76005 Voltage Dropout
GUID-74B7E67B-68AE-4232-AB42-6885B890FBDB-low.gif
VIN = 12 VVOUT = 5 VfSW = 400 kHz
No LoadAuto Mode
Figure 8-8 LM76005 Switching Waveform and Output Ripple
GUID-F555BC8C-5B9B-49D6-BDAD-EF0EDF00418E-low.gif
VIN = 12 VVOUT = 5 VfSW = 400 kHz
No LoadFPWM Mode
Figure 8-10 LM76005 Switching Waveform and Output Ripple
GUID-0CAB5B02-FCDB-48A2-BFC6-B9A41095CCA0-low.gif
VIN = 12 VVOUT = 5 VfSW = 400 kHz
100-mA LoadAuto Mode
Figure 8-12 LM76005 Switching Waveform and Output Ripple
GUID-E73AE37B-B841-48E8-B7B4-D04C022710CA-low.gif
VIN = 12 VVOUT = 5 VfSW = 400 kHz
100-mA LoadFPWM Mode
Figure 8-14 LM76005 Switching Waveform and Output Ripple
GUID-95F6C158-7864-4166-8467-04F4A37B8F15-low.gif
VIN = 12 VVOUT = 5 VfSW = 400 kHz
No LoadAuto Mode
Figure 8-16 LM76005 Start-up Waveform
GUID-ACBB3E40-5C40-4FBE-9738-9A0FE3552658-low.gif
VIN = 12 VVOUT = 5 VfSW = 400 kHz
No LoadFPWM Mode
Figure 8-18 LM76005 Start-up Waveform
GUID-F8A667AD-3C08-471E-B72D-D652C729498C-low.gif
VIN = 12 VVOUT = 5 VfSW = 400 kHz
5-A Load
Figure 8-20 LM76005 Start-up Waveform
GUID-982B5213-14A2-4EEA-9363-B3937A0BFEAE-low.gif
VIN = 12 V VOUT = 5 V fSW = 400 kHz
No Load Auto Mode
Figure 8-22 LM76005 Start-up With Pre-Biased Output
GUID-9A10C355-A2E7-4DC7-972B-E72394247663-low.gif
VIN = 12 V VOUT = 5 V fSW = 400 kHz
Auto Mode
Figure 8-24 LM76005 Short-Circuit Behavior With Hiccup
GUID-20200724-CA0I-BBWG-FNVG-SWR2H6VPTMR8-low.gif
VIN = 13.5 V VOUT = 5 V fSW = 400 kHz
CFLT = 4 × 2.2 µF, LFLT = 1 µH IOUT = 3.5 A
Figure 8-26 LM76005 Conducted EMI Result vs. CISPR25 Limits - Low Frequency
GUID-E7676CDA-E84A-464C-8BB1-CD539FAE3ECA-low.gif
VIN = 13.5 V VOUT = 5 V fSW = 400 kHz
CFLT = 4 × 2.2 µF, LFLT = 1 µH IOUT = 3.5 A
Figure 8-28 LM76005 Radiated EMI Result vs. CISPR25 Limits - Low Frequency
GUID-CC71142B-03E0-4014-8CFA-02A6BC4FC3B6-low.gif
VOUT = 5 VfSW = 400 kHzAuto Mode
Figure 8-5 LM76005 Load and Line Regulation
GUID-9494A105-402D-4365-A1D2-E6C36647EDD1-low.gif
VOUT = 5 VfSW = 400 kHzFPWM Mode
Figure 8-7 LM76005 Frequency Dropout
GUID-A71AE094-7C77-44BD-9314-AD3C06E042D0-low.gif
VIN = 24 VVOUT = 5 VfSW = 400 kHz
No LoadAuto Mode
Figure 8-9 LM76005 Switching Waveform and Output Ripple
GUID-4FB74057-13EB-4D17-90CD-07F66016FC08-low.gif
VIN = 24 VVOUT = 5 VfSW = 400 kHz
No LoadFPWM Mode
Figure 8-11 LM76005 Switching Waveform and Output Ripple
GUID-8E64436D-31DD-486C-B17A-4D22C6D7BD7B-low.gif
VIN = 24 VVOUT = 5 VfSW = 400 kHz
100-mA LoadAuto Mode
Figure 8-13 LM76005 Switching Waveform and Output Ripple
GUID-98D7BBB2-D4C5-4D8E-AF80-1CBBEE2CF8E2-low.gif
VIN = 24 VVOUT = 5 VfSW = 400 kHz
100-mA LoadFPWM Mode
Figure 8-15 LM76005 Switching Waveform and Output Ripple
GUID-CB34ABC0-4EAC-4E33-9430-8A35AFFA0A56-low.gif
VIN = 24 VVOUT = 5 VfSW = 400 kHz
No LoadAuto Mode
Figure 8-17 LM76005 Start-up Waveform
GUID-3A555101-880A-4D79-9C31-BB54032CCF46-low.gif
VIN = 24 VVOUT = 5 VfSW = 400 kHz
No LoadFPWM Mode
Figure 8-19 LM76005 Start-up Waveform
GUID-78974733-9E07-462E-99B6-647BA1F0FB82-low.gif
VIN = 24VVOUT = 5 VfSW = 400 kHz
5-A Load
Figure 8-21 LM76005 Start-up Waveform
GUID-86A30B9F-1828-4FEE-A72E-9065B20F4DDE-low.gif
VIN = 24V VOUT = 5 V fSW = 400 kHz
No Load Auto Mode
Figure 8-23 LM76005 Start-up With Pre-Biased Output
GUID-FE021A10-F625-439B-80AB-BF4D129247DC-low.gif
VIN = 24 V VOUT = 5 V fSW = 400 kHz
Auto Mode
Figure 8-25 LM76005 Short-Circuit Behavior With Hiccup
GUID-20200724-CA0I-WGG4-SGBJ-FBBMWZXLMBR2-low.gif
VIN = 13.5 V VOUT = 5 V fSW = 400 kHz
CFLT = 4 × 2.2 µF, LFLT = 1 µH IOUT = 3.5 A
Figure 8-27 LM76005 Conducted EMI Result vs. CISPR25 Limits - High Frequency
GUID-0896959E-13BB-4413-8984-FC02280E7F9A-low.gif
VIN = 13.5 V VOUT = 5 V fSW = 400 kHz
CFLT = 4 × 2.2 µF, LFLT = 1 µH IOUT = 3.5 A
Figure 8-29 LM76005 Radiated EMI Result vs. CISPR25 Limits - High Frequency