JAJSEA9A December   2017  – March 2018 MSP430FR5969-SP

PRODUCTION DATA.  

  1. 1デバイスの概要
    1. 1.1 特長
    2. 1.2 アプリケーション
    3. 1.3 概要
    4. 1.4 機能ブロック図
  2. 2改訂履歴
  3. 3Terminal Configuration and Functions
    1. 3.1 Pin Diagrams
    2. 3.2 Signal Descriptions
      1.      Signal Descriptions
    3. 3.3 Pin Multiplexing
    4. 3.4 Connection of Unused Pins
  4. 4Specifications
    1. 4.1  Absolute Maximum Ratings
    2. 4.2  ESD Ratings
    3. 4.3  Recommended Operating Conditions
    4. 4.4  Active Mode Supply Current Into VCC Excluding External Current
    5. 4.5  Typical Characteristics – Active Mode Supply Currents
    6. 4.6  Low-Power Mode (LPM0, LPM1) Supply Currents Into VCC Excluding External Current
    7. 4.7  Low-Power Mode (LPM2, LPM3, LPM4) Supply Currents (Into VCC) Excluding External Current
    8. 4.8  Low-Power Mode (LPM3.5, LPM4.5) Supply Currents (Into VCC) Excluding External Current
    9. 4.9  Typical Characteristics, Current Consumption per Module
    10. 4.10 Thermal Resistance Characteristics
    11. 4.11 Timing and Switching Characteristics
      1. 4.11.1  Power Supply Sequencing
        1. Table 4-1 Brownout and Device Reset Power Ramp Requirements
        2. Table 4-2 SVS
      2. 4.11.2  Reset Timing
        1. Table 4-3 Reset Input
      3. 4.11.3  Clock Specifications
        1. Table 4-4 Low-Frequency Crystal Oscillator, LFXT
        2. Table 4-5 High-Frequency Crystal Oscillator, HFXT
        3. Table 4-6 DCO
        4. Table 4-7 Internal Very-Low-Power Low-Frequency Oscillator (VLO)
        5. Table 4-8 Module Oscillator (MODOSC)
      4. 4.11.4  Wake-up Characteristics
        1. Table 4-9   Wake-up Times From Low-Power Modes and Reset
        2. Table 4-10 Typical Wake-up Charge
        3. 4.11.4.1    Typical Characteristics, Average LPM Currents vs Wake-up Frequency
      5. 4.11.5  Digital I/Os
        1. Table 4-11 Digital Inputs
        2. Table 4-12 Digital Outputs
        3. 4.11.5.1    Typical Characteristics, Digital Outputs at 3.0 V and 2.2 V
        4. Table 4-13 Pin-Oscillator Frequency, Ports Px
        5. 4.11.5.2    Typical Characteristics, Pin-Oscillator Frequency
      6. 4.11.6  Timer_A and Timer_B
        1. Table 4-14 Timer_A
        2. Table 4-15 Timer_B
      7. 4.11.7  eUSCI
        1. Table 4-16 eUSCI (UART Mode) Clock Frequency
        2. Table 4-17 eUSCI (UART Mode)
        3. Table 4-18 eUSCI (SPI Master Mode) Clock Frequency
        4. Table 4-19 eUSCI (SPI Master Mode)
        5. Table 4-20 eUSCI (SPI Slave Mode)
        6. Table 4-21 eUSCI (I2C Mode)
      8. 4.11.8  ADC
        1. Table 4-22 12-Bit ADC, Power Supply and Input Range Conditions
        2. Table 4-23 12-Bit ADC, Timing Parameters
        3. Table 4-24 12-Bit ADC, Linearity Parameters With External Reference
        4. Table 4-25 12-Bit ADC, Dynamic Performance for Differential Inputs With External Reference
        5. Table 4-26 12-Bit ADC, Dynamic Performance for Differential Inputs With Internal Reference
        6. Table 4-27 12-Bit ADC, Dynamic Performance for Single-Ended Inputs With External Reference
        7. Table 4-28 12-Bit ADC, Dynamic Performance for Single-Ended Inputs With Internal Reference
        8. Table 4-29 12-Bit ADC, Dynamic Performance With 32.768-kHz Clock
        9. Table 4-30 12-Bit ADC, Temperature Sensor and Built-In V1/2
        10. Table 4-31 12-Bit ADC, External Reference
      9. 4.11.9  Reference
        1. Table 4-32 REF, Built-In Reference
      10. 4.11.10 Comparator
        1. Table 4-33 Comparator_E
      11. 4.11.11 FRAM
        1. Table 4-34 FRAM
    12. 4.12 Emulation and Debug
      1. Table 4-35 JTAG and Spy-Bi-Wire Interface
  5. 5Detailed Description
    1. 5.1  Overview
    2. 5.2  CPU
    3. 5.3  Operating Modes
      1. 5.3.1 Peripherals in Low-Power Modes
        1. 5.3.1.1 Idle Currents of Peripherals in LPM3 and LPM4
    4. 5.4  Interrupt Vector Table and Signatures
    5. 5.5  Memory Organization
    6. 5.6  Bootloader (BSL)
    7. 5.7  JTAG Operation
      1. 5.7.1 JTAG Standard Interface
      2. 5.7.2 Spy-Bi-Wire Interface
    8. 5.8  FRAM
    9. 5.9  Memory Protection Unit Including IP Encapsulation
    10. 5.10 Peripherals
      1. 5.10.1  Digital I/O
      2. 5.10.2  Oscillator and Clock System (CS)
      3. 5.10.3  Power-Management Module (PMM)
      4. 5.10.4  Hardware Multiplier (MPY)
      5. 5.10.5  Real-Time Clock (RTC_B) (Only MSP430FR596x and MSP430FR594x)
      6. 5.10.6  Watchdog Timer (WDT_A)
      7. 5.10.7  System Module (SYS)
      8. 5.10.8  DMA Controller
      9. 5.10.9  Enhanced Universal Serial Communication Interface (eUSCI)
      10. 5.10.10 TA0, TA1
      11. 5.10.11 TA2, TA3
      12. 5.10.12 TB0
      13. 5.10.13 ADC12_B
      14. 5.10.14 Comparator_E
      15. 5.10.15 CRC16
      16. 5.10.16 AES256 Accelerator
      17. 5.10.17 True Random Seed
      18. 5.10.18 Shared Reference (REF)
      19. 5.10.19 Embedded Emulation
        1. 5.10.19.1 Embedded Emulation Module (EEM)
        2. 5.10.19.2 EnergyTrace++ Technology
      20. 5.10.20 Peripheral File Map
    11. 5.11 Input and Output Diagrams
      1. 5.11.1  Port P1 (P1.0 to P1.2) Input/Output With Schmitt Trigger
      2. 5.11.2  Port P1 (P1.3 to P1.5) Input/Output With Schmitt Trigger
      3. 5.11.3  Port P1 (P1.6 and P1.7) Input/Output With Schmitt Trigger
      4. 5.11.4  Port P2 (P2.0 to P2.2) Input/Output With Schmitt Trigger
      5. 5.11.5  Port P2 (P2.3 and P2.4) Input/Output With Schmitt Trigger
      6. 5.11.6  Port P2 (P2.5 and P2.6) Input/Output With Schmitt Trigger
      7. 5.11.7  Port P2 (P2.7) Input/Output With Schmitt Trigger
      8. 5.11.8  Port P3 (P3.0 to P3.3) Input/Output With Schmitt Trigger
      9. 5.11.9  Port P3 (P3.4 to P3.7) Input/Output With Schmitt Trigger
      10. 5.11.10 Port P4 (P4.0 to P4.3) Input/Output With Schmitt Trigger
      11. 5.11.11 Port P4 (P4.4 to P4.7) Input/Output With Schmitt Trigger
      12. 5.11.12 Port PJ, PJ.4 and PJ.5 Input/Output With Schmitt Trigger
      13. 5.11.13 Port PJ (PJ.6 and PJ.7) Input/Output With Schmitt Trigger
      14. 5.11.14 Port PJ (PJ.0 to PJ.3) JTAG Pins TDO, TMS, TCK, TDI/TCLK, Input/Output With Schmitt Trigger
    12. 5.12 Device Descriptor (TLV)
    13. 5.13 Identification
      1. 5.13.1 Revision Identification
      2. 5.13.2 Device Identification
      3. 5.13.3 JTAG Identification
  6. 6Applications, Implementation, and Layout
    1. 6.1 Software Best Practices for Radiation Effects Mitigation
    2. 6.2 Device Connection and Layout Fundamentals
      1. 6.2.1 Power Supply Decoupling and Bulk Capacitors
      2. 6.2.2 External Oscillator
      3. 6.2.3 JTAG
      4. 6.2.4 Reset
      5. 6.2.5 Unused Pins
      6. 6.2.6 General Layout Recommendations
      7. 6.2.7 Do's and Don'ts
    3. 6.3 Peripheral- and Interface-Specific Design Information
      1. 6.3.1 ADC12_B Peripheral
        1. 6.3.1.1 Partial Schematic
        2. 6.3.1.2 Design Requirements
        3. 6.3.1.3 Detailed Design Procedure
        4. 6.3.1.4 Layout Guidelines
  7. 7デバイスおよびドキュメントのサポート
    1. 7.1  使い始めと次の手順
    2. 7.2  ツールとソフトウェア
    3. 7.3  ドキュメントのサポート
    4. 7.4  放射線情報
    5. 7.5  関連リンク
    6. 7.6  Community Resources
    7. 7.7  商標
    8. 7.8  静電気放電に関する注意事項
    9. 7.9  Export Control Notice
    10. 7.10 Glossary
  8. 8メカニカル、パッケージ、および注文情報

パッケージ・オプション

メカニカル・データ(パッケージ|ピン)
サーマルパッド・メカニカル・データ
発注情報

Peripheral File Map

Table 5-20 lists the base address for each peripheral. For complete module register descriptions, see the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, MSP430FR69xx Family User's Guide.

Table 5-20 Peripherals

MODULE NAME BASE ADDRESS OFFSET ADDRESS RANGE
Special Functions (see Table 5-21) 0100h 000h–01Fh
PMM (see Table 5-22) 0120h 000h–01Fh
FRAM Control (see Table 5-23) 0140h 000h–00Fh
CRC16 (see Table 5-24) 0150h 000h–007h
Watchdog (see Table 5-25) 015Ch 000h–001h
CS (see Table 5-26) 0160h 000h–00Fh
SYS (see Table 5-27) 0180h 000h–01Fh
Shared Reference (see Table 5-28) 01B0h 000h–001h
Port P1, P2 (see Table 5-29) 0200h 000h–01Fh
Port P3, P4 (see Table 5-30) 0220h 000h–01Fh
Port PJ (see Table 5-31) 0320h 000h–01Fh
TA0 (see Table 5-32) 0340h 000h–02Fh
TA1 (see Table 5-33) 0380h 000h–02Fh
TB0 (see Table 5-34) 03C0h 000h–02Fh
TA2 (see Table 5-35) 0400h 000h–02Fh
TA3 (see Table 5-36) 0440h 000h–02Fh
Real-Time Clock (RTC_B) (see Table 5-37) 04A0h 000h–01Fh
32-Bit Hardware Multiplier (see Table 5-38) 04C0h 000h–02Fh
DMA General Control (see Table 5-39) 0500h 000h–00Fh
DMA Channel 0 (see Table 5-39) 0510h 000h–00Fh
DMA Channel 1 (see Table 5-39) 0520h 000h–00Fh
DMA Channel 2 (see Table 5-39) 0530h 000h–00Fh
MPU Control (see Table 5-40) 05A0h 000h–00Fh
eUSCI_A0 (see Table 5-41) 05C0h 000h–01Fh
eUSCI_A1 (see Table 5-42) 05E0h 000h–01Fh
eUSCI_B0 (see Table 5-43) 0640h 000h–02Fh
ADC12_B (see Table 5-44) 0800h 000h–09Fh
Comparator_E (see Table 5-45) 08C0h 000h–00Fh
AES (see Table 5-46) 09C0h 000h–00Fh

Table 5-21 Special Function Registers (Base Address: 0100h)

REGISTER DESCRIPTION REGISTER OFFSET
SFR interrupt enable SFRIE1 00h
SFR interrupt flag SFRIFG1 02h
SFR reset pin control SFRRPCR 04h

Table 5-22 PMM Registers (Base Address: 0120h)

REGISTER DESCRIPTION REGISTER OFFSET
PMM control 0 PMMCTL0 00h
PMM interrupt flags PMMIFG 0Ah
PM5 control 0 PM5CTL0 10h

Table 5-23 FRAM Control Registers (Base Address: 0140h)

REGISTER DESCRIPTION REGISTER OFFSET
FRAM control 0 FRCTL0 00h
General control 0 GCCTL0 04h
General control 1 GCCTL1 06h

Table 5-24 CRC16 Registers (Base Address: 0150h)

REGISTER DESCRIPTION REGISTER OFFSET
CRC data input CRC16DI 00h
CRC data input reverse byte CRCDIRB 02h
CRC initialization and result CRCINIRES 04h
CRC result reverse byte CRCRESR 06h

Table 5-25 Watchdog Registers (Base Address: 015Ch)

REGISTER DESCRIPTION REGISTER OFFSET
Watchdog timer control WDTCTL 00h

Table 5-26 CS Registers (Base Address: 0160h)

REGISTER DESCRIPTION REGISTER OFFSET
CS control 0 CSCTL0 00h
CS control 1 CSCTL1 02h
CS control 2 CSCTL2 04h
CS control 3 CSCTL3 06h
CS control 4 CSCTL4 08h
CS control 5 CSCTL5 0Ah
CS control 6 CSCTL6 0Ch

Table 5-27 SYS Registers (Base Address: 0180h)

REGISTER DESCRIPTION REGISTER OFFSET
System control SYSCTL 00h
JTAG mailbox control SYSJMBC 06h
JTAG mailbox input 0 SYSJMBI0 08h
JTAG mailbox input 1 SYSJMBI1 0Ah
JTAG mailbox output 0 SYSJMBO0 0Ch
JTAG mailbox output 1 SYSJMBO1 0Eh
User NMI vector generator SYSUNIV 1Ah
System NMI vector generator SYSSNIV 1Ch
Reset vector generator SYSRSTIV 1Eh

Table 5-28 Shared Reference Registers (Base Address: 01B0h)

REGISTER DESCRIPTION REGISTER OFFSET
Shared reference control REFCTL 00h

Table 5-29 Port P1, P2 Registers (Base Address: 0200h)

REGISTER DESCRIPTION REGISTER OFFSET
Port P1 input P1IN 00h
Port P1 output P1OUT 02h
Port P1 direction P1DIR 04h
Port P1 resistor enable P1REN 06h
Port P1 selection 0 P1SEL0 0Ah
Port P1 selection 1 P1SEL1 0Ch
Port P1 interrupt vector word P1IV 0Eh
Port P1 complement selection P1SELC 16h
Port P1 interrupt edge select P1IES 18h
Port P1 interrupt enable P1IE 1Ah
Port P1 interrupt flag P1IFG 1Ch
Port P2 input P2IN 01h
Port P2 output P2OUT 03h
Port P2 direction P2DIR 05h
Port P2 resistor enable P2REN 07h
Port P2 selection 0 P2SEL0 0Bh
Port P2 selection 1 P2SEL1 0Dh
Port P2 complement selection P2SELC 17h
Port P2 interrupt vector word P2IV 1Eh
Port P2 interrupt edge select P2IES 19h
Port P2 interrupt enable P2IE 1Bh
Port P2 interrupt flag P2IFG 1Dh

Table 5-30 Port P3, P4 Registers (Base Address: 0220h)

REGISTER DESCRIPTION REGISTER OFFSET
Port P3 input P3IN 00h
Port P3 output P3OUT 02h
Port P3 direction P3DIR 04h
Port P3 resistor enable P3REN 06h
Port P3 selection 0 P3SEL0 0Ah
Port P3 selection 1 P3SEL1 0Ch
Port P3 interrupt vector word P3IV 0Eh
Port P3 complement selection P3SELC 16h
Port P3 interrupt edge select P3IES 18h
Port P3 interrupt enable P3IE 1Ah
Port P3 interrupt flag P3IFG 1Ch
Port P4 input P4IN 01h
Port P4 output P4OUT 03h
Port P4 direction P4DIR 05h
Port P4 resistor enable P4REN 07h
Port P4 selection 0 P4SEL0 0Bh
Port P4 selection 1 P4SEL1 0Dh
Port P4 complement selection P4SELC 17h
Port P4 interrupt vector word P4IV 1Eh
Port P4 interrupt edge select P4IES 19h
Port P4 interrupt enable P4IE 1Bh
Port P4 interrupt flag P4IFG 1Dh

Table 5-31 Port J Registers (Base Address: 0320h)

REGISTER DESCRIPTION REGISTER OFFSET
Port PJ input PJIN 00h
Port PJ output PJOUT 02h
Port PJ direction PJDIR 04h
Port PJ resistor enable PJREN 06h
Port PJ selection 0 PJSEL0 0Ah
Port PJ selection 1 PJSEL1 0Ch
Port PJ complement selection PJSELC 16h

Table 5-32 TA0 Registers (Base Address: 0340h)

REGISTER DESCRIPTION REGISTER OFFSET
TA0 control TA0CTL 00h
Capture/compare control 0 TA0CCTL0 02h
Capture/compare control 1 TA0CCTL1 04h
Capture/compare control 2 TA0CCTL2 06h
Capture/compare control 3 TA0CCTL3 08h
Capture/compare control 4 TA0CCTL4 0Ah
TA0 counter TA0R 10h
Capture/compare 0 TA0CCR0 12h
Capture/compare 1 TA0CCR1 14h
Capture/compare 2 TA0CCR2 16h
Capture/compare 3 TA0CCR3 18h
Capture/compare 4 TA0CCR4 1Ah
TA0 expansion 0 TA0EX0 20h
TA0 interrupt vector TA0IV 2Eh

Table 5-33 TA1 Registers (Base Address: 0380h)

REGISTER DESCRIPTION REGISTER OFFSET
TA1 control TA1CTL 00h
Capture/compare control 0 TA1CCTL0 02h
Capture/compare control 1 TA1CCTL1 04h
Capture/compare control 2 TA1CCTL2 06h
TA1 counter TA1R 10h
Capture/compare 0 TA1CCR0 12h
Capture/compare 1 TA1CCR1 14h
Capture/compare 2 TA1CCR2 16h
TA1 expansion 0 TA1EX0 20h
TA1 interrupt vector TA1IV 2Eh

Table 5-34 TB0 Registers (Base Address: 03C0h)

REGISTER DESCRIPTION REGISTER OFFSET
TB0 control TB0CTL 00h
Capture/compare control 0 TB0CCTL0 02h
Capture/compare control 1 TB0CCTL1 04h
Capture/compare control 2 TB0CCTL2 06h
Capture/compare control 3 TB0CCTL3 08h
Capture/compare control 4 TB0CCTL4 0Ah
Capture/compare control 5 TB0CCTL5 0Ch
Capture/compare control 6 TB0CCTL6 0Eh
TB0 counter TB0R 10h
Capture/compare 0 TB0CCR0 12h
Capture/compare 1 TB0CCR1 14h
Capture/compare 2 TB0CCR2 16h
Capture/compare 3 TB0CCR3 18h
Capture/compare 4 TB0CCR4 1Ah
Capture/compare 5 TB0CCR5 1Ch
Capture/compare 6 TB0CCR6 1Eh
TB0 expansion 0 TB0EX0 20h
TB0 interrupt vector TB0IV 2Eh

Table 5-35 TA2 Registers (Base Address: 0400h)

REGISTER DESCRIPTION REGISTER OFFSET
TA2 control TA2CTL 00h
Capture/compare control 0 TA2CCTL0 02h
Capture/compare control 1 TA2CCTL1 04h
TA2 counter TA2R 10h
Capture/compare 0 TA2CCR0 12h
Capture/compare 1 TA2CCR1 14h
TA2 expansion 0 TA2EX0 20h
TA2 interrupt vector TA2IV 2Eh

Table 5-36 TA3 Registers (Base Address: 0440h)

REGISTER DESCRIPTION REGISTER OFFSET
TA3 control TA3CTL 00h
Capture/compare control 0 TA3CCTL0 02h
Capture/compare control 1 TA3CCTL1 04h
TA3 counter TA3R 10h
Capture/compare 0 TA3CCR0 12h
Capture/compare 1 TA3CCR1 14h
TA3 expansion 0 TA3EX0 20h
TA3 interrupt vector TA3IV 2Eh

Table 5-37 RTC_B Real-Time Clock Registers (Base Address: 04A0h)

REGISTER DESCRIPTION REGISTER OFFSET
RTC control 0 RTCCTL0 00h
RTC control 1 RTCCTL1 01h
RTC control 2 RTCCTL2 02h
RTC control 3 RTCCTL3 03h
RTC prescaler 0 control RTCPS0CTL 08h
RTC prescaler 1 control RTCPS1CTL 0Ah
RTC prescaler 0 RTCPS0 0Ch
RTC prescaler 1 RTCPS1 0Dh
RTC interrupt vector word RTCIV 0Eh
RTC seconds RTCSEC/RTCNT1 10h
RTC minutes RTCMIN/RTCNT2 11h
RTC hours RTCHOUR/RTCNT3 12h
RTC day of week RTCDOW/RTCNT4 13h
RTC days RTCDAY 14h
RTC month RTCMON 15h
RTC year low RTCYEARL 16h
RTC year high RTCYEARH 17h
RTC alarm minutes RTCAMIN 18h
RTC alarm hours RTCAHOUR 19h
RTC alarm day of week RTCADOW 1Ah
RTC alarm days RTCADAY 1Bh
Binary-to-BCD conversion BIN2BCD 1Ch
BCD-to-binary conversion BCD2BIN 1Eh

Table 5-38 32-Bit Hardware Multiplier Registers (Base Address: 04C0h)

REGISTER DESCRIPTION REGISTER OFFSET
16-bit operand 1 – multiply MPY 00h
16-bit operand 1 – signed multiply MPYS 02h
16-bit operand 1 – multiply accumulate MAC 04h
16-bit operand 1 – signed multiply accumulate MACS 06h
16-bit operand 2 OP2 08h
16 × 16 result low word RESLO 0Ah
16 × 16 result high word RESHI 0Ch
16 × 16 sum extension SUMEXT 0Eh
32-bit operand 1 – multiply low word MPY32L 10h
32-bit operand 1 – multiply high word MPY32H 12h
32-bit operand 1 – signed multiply low word MPYS32L 14h
32-bit operand 1 – signed multiply high word MPYS32H 16h
32-bit operand 1 – multiply accumulate low word MAC32L 18h
32-bit operand 1 – multiply accumulate high word MAC32H 1Ah
32-bit operand 1 – signed multiply accumulate low word MACS32L 1Ch
32-bit operand 1 – signed multiply accumulate high word MACS32H 1Eh
32-bit operand 2 – low word OP2L 20h
32-bit operand 2 – high word OP2H 22h
32 × 32 result 0 – least significant word RES0 24h
32 × 32 result 1 RES1 26h
32 × 32 result 2 RES2 28h
32 × 32 result 3 – most significant word RES3 2Ah
MPY32 control 0 MPY32CTL0 2Ch

Table 5-39 DMA Registers (Base Address DMA General Control: 0500h,
DMA Channel 0: 0510h, DMA Channel 1: 0520h, DMA Channel 2: 0530h)

REGISTER DESCRIPTION REGISTER OFFSET
DMA channel 0 control DMA0CTL 00h
DMA channel 0 source address low DMA0SAL 02h
DMA channel 0 source address high DMA0SAH 04h
DMA channel 0 destination address low DMA0DAL 06h
DMA channel 0 destination address high DMA0DAH 08h
DMA channel 0 transfer size DMA0SZ 0Ah
DMA channel 1 control DMA1CTL 00h
DMA channel 1 source address low DMA1SAL 02h
DMA channel 1 source address high DMA1SAH 04h
DMA channel 1 destination address low DMA1DAL 06h
DMA channel 1 destination address high DMA1DAH 08h
DMA channel 1 transfer size DMA1SZ 0Ah
DMA channel 2 control DMA2CTL 00h
DMA channel 2 source address low DMA2SAL 02h
DMA channel 2 source address high DMA2SAH 04h
DMA channel 2 destination address low DMA2DAL 06h
DMA channel 2 destination address high DMA2DAH 08h
DMA channel 2 transfer size DMA2SZ 0Ah
DMA module control 0 DMACTL0 00h
DMA module control 1 DMACTL1 02h
DMA module control 2 DMACTL2 04h
DMA module control 3 DMACTL3 06h
DMA module control 4 DMACTL4 08h
DMA interrupt vector DMAIV 0Eh

Table 5-40 MPU Control Registers (Base Address: 05A0h)

REGISTER DESCRIPTION REGISTER OFFSET
MPU control 0 MPUCTL0 00h
MPU control 1 MPUCTL1 02h
MPU segmentation border 2 MPUSEGB2 04h
MPU segmentation border 1 MPUSEGB1 06h
MPU access management MPUSAM 08h
MPU IP control 0 MPUIPC0 0Ah
MPU IP encapsulation segment border 2 MPUIPSEGB2 0Ch
MPU IP encapsulation segment border 1 MPUIPSEGB1 0Eh

Table 5-41 eUSCI_A0 Registers (Base Address: 05C0h)

REGISTER DESCRIPTION REGISTER OFFSET
eUSCI_A control word 0 UCA0CTLW0 00h
eUSCI _A control word 1 UCA0CTLW1 02h
eUSCI_A baud rate 0 UCA0BR0 06h
eUSCI_A baud rate 1 UCA0BR1 07h
eUSCI_A modulation control UCA0MCTLW 08h
eUSCI_A status word UCA0STATW 0Ah
eUSCI_A receive buffer UCA0RXBUF 0Ch
eUSCI_A transmit buffer UCA0TXBUF 0Eh
eUSCI_A LIN control UCA0ABCTL 10h
eUSCI_A IrDA transmit control UCA0IRTCTL 12h
eUSCI_A IrDA receive control UCA0IRRCTL 13h
eUSCI_A interrupt enable UCA0IE 1Ah
eUSCI_A interrupt flags UCA0IFG 1Ch
eUSCI_A interrupt vector word UCA0IV 1Eh

Table 5-42 eUSCI_A1 Registers (Base Address:05E0h)

REGISTER DESCRIPTION REGISTER OFFSET
eUSCI_A control word 0 UCA1CTLW0 00h
eUSCI _A control word 1 UCA1CTLW1 02h
eUSCI_A baud rate 0 UCA1BR0 06h
eUSCI_A baud rate 1 UCA1BR1 07h
eUSCI_A modulation control UCA1MCTLW 08h
eUSCI_A status word UCA1STATW 0Ah
eUSCI_A receive buffer UCA1RXBUF 0Ch
eUSCI_A transmit buffer UCA1TXBUF 0Eh
eUSCI_A LIN control UCA1ABCTL 10h
eUSCI_A IrDA transmit control UCA1IRTCTL 12h
eUSCI_A IrDA receive control UCA1IRRCTL 13h
eUSCI_A interrupt enable UCA1IE 1Ah
eUSCI_A interrupt flags UCA1IFG 1Ch
eUSCI_A interrupt vector word UCA1IV 1Eh

Table 5-43 eUSCI_B0 Registers (Base Address: 0640h)

REGISTER DESCRIPTION REGISTER OFFSET
eUSCI_B control word 0 UCB0CTLW0 00h
eUSCI_B control word 1 UCB0CTLW1 02h
eUSCI_B bit rate 0 UCB0BR0 06h
eUSCI_B bit rate 1 UCB0BR1 07h
eUSCI_B status word UCB0STATW 08h
eUSCI_B byte counter threshold UCB0TBCNT 0Ah
eUSCI_B receive buffer UCB0RXBUF 0Ch
eUSCI_B transmit buffer UCB0TXBUF 0Eh
eUSCI_B I2C own address 0 UCB0I2COA0 14h
eUSCI_B I2C own address 1 UCB0I2COA1 16h
eUSCI_B I2C own address 2 UCB0I2COA2 18h
eUSCI_B I2C own address 3 UCB0I2COA3 1Ah
eUSCI_B received address UCB0ADDRX 1Ch
eUSCI_B address mask UCB0ADDMASK 1Eh
eUSCI I2C slave address UCB0I2CSA 20h
eUSCI interrupt enable UCB0IE 2Ah
eUSCI interrupt flags UCB0IFG 2Ch
eUSCI interrupt vector word UCB0IV 2Eh

Table 5-44 ADC12_B Registers (Base Address: 0800h)

REGISTER DESCRIPTION REGISTER OFFSET
ADC12_B control 0 ADC12CTL0 00h
ADC12_B control 1 ADC12CTL1 02h
ADC12_B control 2 ADC12CTL2 04h
ADC12_B control 3 ADC12CTL3 06h
ADC12_B window comparator low threshold ADC12LO 08h
ADC12_B window comparator high threshold ADC12HI 0Ah
ADC12_B interrupt flag 0 ADC12IFGR0 0Ch
ADC12_B interrupt flag 1 ADC12IFGR1 0Eh
ADC12_B interrupt flag 2 ADC12IFGR2 10h
ADC12_B interrupt enable 0 ADC12IER0 12h
ADC12_B interrupt enable 1 ADC12IER1 14h
ADC12_B interrupt enable 2 ADC12IER2 16h
ADC12_B interrupt vector ADC12IV 18h
ADC12_B memory control 0 ADC12MCTL0 20h
ADC12_B memory control 1 ADC12MCTL1 22h
ADC12_B memory control 2 ADC12MCTL2 24h
ADC12_B memory control 3 ADC12MCTL3 26h
ADC12_B memory control 4 ADC12MCTL4 28h
ADC12_B memory control 5 ADC12MCTL5 2Ah
ADC12_B memory control 6 ADC12MCTL6 2Ch
ADC12_B memory control 7 ADC12MCTL7 2Eh
ADC12_B memory control 8 ADC12MCTL8 30h
ADC12_B memory control 9 ADC12MCTL9 32h
ADC12_B memory control 10 ADC12MCTL10 34h
ADC12_B memory control 11 ADC12MCTL11 36h
ADC12_B memory control 12 ADC12MCTL12 38h
ADC12_B memory control 13 ADC12MCTL13 3Ah
ADC12_B memory control 14 ADC12MCTL14 3Ch
ADC12_B memory control 15 ADC12MCTL15 3Eh
ADC12_B memory control 16 ADC12MCTL16 40h
ADC12_B memory control 17 ADC12MCTL17 42h
ADC12_B memory control 18 ADC12MCTL18 44h
ADC12_B memory control 19 ADC12MCTL19 46h
ADC12_B memory control 20 ADC12MCTL20 48h
ADC12_B memory control 21 ADC12MCTL21 4Ah
ADC12_B memory control 22 ADC12MCTL22 4Ch
ADC12_B memory control 23 ADC12MCTL23 4Eh
ADC12_B memory control 24 ADC12MCTL24 50h
ADC12_B memory control 25 ADC12MCTL25 52h
ADC12_B memory control 26 ADC12MCTL26 54h
ADC12_B memory control 27 ADC12MCTL27 56h
ADC12_B memory control 28 ADC12MCTL28 58h
ADC12_B memory control 29 ADC12MCTL29 5Ah
ADC12_B memory control 30 ADC12MCTL30 5Ch
ADC12_B memory control 31 ADC12MCTL31 5Eh
ADC12_B memory 0 ADC12MEM0 60h
ADC12_B memory 1 ADC12MEM1 62h
ADC12_B memory 2 ADC12MEM2 64h
ADC12_B memory 3 ADC12MEM3 66h
ADC12_B memory 4 ADC12MEM4 68h
ADC12_B memory 5 ADC12MEM5 6Ah
ADC12_B memory 6 ADC12MEM6 6Ch
ADC12_B memory 7 ADC12MEM7 6Eh
ADC12_B memory 8 ADC12MEM8 70h
ADC12_B memory 9 ADC12MEM9 72h
ADC12_B memory 10 ADC12MEM10 74h
ADC12_B memory 11 ADC12MEM11 76h
ADC12_B memory 12 ADC12MEM12 78h
ADC12_B memory 13 ADC12MEM13 7Ah
ADC12_B memory 14 ADC12MEM14 7Ch
ADC12_B memory 15 ADC12MEM15 7Eh
ADC12_B memory 16 ADC12MEM16 80h
ADC12_B memory 17 ADC12MEM17 82h
ADC12_B memory 18 ADC12MEM18 84h
ADC12_B memory 19 ADC12MEM19 86h
ADC12_B memory 20 ADC12MEM20 88h
ADC12_B memory 21 ADC12MEM21 8Ah
ADC12_B memory 22 ADC12MEM22 8Ch
ADC12_B memory 23 ADC12MEM23 8Eh
ADC12_B memory 24 ADC12MEM24 90h
ADC12_B memory 25 ADC12MEM25 92h
ADC12_B memory 26 ADC12MEM26 94h
ADC12_B memory 27 ADC12MEM27 96h
ADC12_B memory 28 ADC12MEM28 98h
ADC12_B memory 29 ADC12MEM29 9Ah
ADC12_B memory 30 ADC12MEM30 9Ch
ADC12_B memory 31 ADC12MEM31 9Eh

Table 5-45 Comparator_E Registers (Base Address: 08C0h)

REGISTER DESCRIPTION REGISTER OFFSET
Comparator_E control 0 CECTL0 00h
Comparator_E control 1 CECTL1 02h
Comparator_E control 2 CECTL2 04h
Comparator_E control 3 CECTL3 06h
Comparator_E interrupt CEINT 0Ch
Comparator_E interrupt vector word CEIV 0Eh

Table 5-46 AES Accelerator Registers (Base Address: 09C0h)

REGISTER DESCRIPTION REGISTER OFFSET
AES accelerator control 0 AESACTL0 00h
AES accelerator control 1 AESACTL1 02h
AES accelerator status AESASTAT 04h
AES accelerator key AESAKEY 06h
AES accelerator data in AESADIN 008h
AES accelerator data out AESADOUT 00Ah
AES accelerator XORed data in AESAXDIN 00Ch
AES accelerator XORed data in (no trigger) AESAXIN 00Eh