6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)
|
MIN |
MAX |
UNIT |
VS |
Supply voltage (total bipolar supplies)(4) |
|
|
±14 |
V |
VIN |
Input voltage |
|
VS– – 0.5 |
VS+ + 0.5 |
V |
VIN,Diff |
Differential input voltage(2) |
|
|
±7 |
V |
II |
Continuous input current |
|
|
±10 |
mA |
IO |
Continuous output current(3) |
TA = –40℃ to +85℃ |
|
±40 |
mA |
TA = 125℃ |
|
±12 |
mA |
PD |
Continuous power dissipation |
|
See Thermal Information |
|
TJ |
Junction temperature |
|
|
150 |
°C |
Tstg |
Storage temperature |
|
–65 |
125 |
°C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. Theseare stress ratings only, which do not imply functional operation of the device at these or anyother conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Equal to the lower of ±7 V or total supply voltage.
(3) Long-term continuous output current for electromigration limits.
(4) VS is the total supply voltage given by VS = VS+ – VS– .