JAJSPG9H August 1987 – January 2023 SN65ALS180 , SN75ALS180
PRODUCTION DATA
デバイスごとのパッケージ図は、PDF版データシートをご参照ください。
PARAMETER | TEST CONDITIONS | MIN | TYP(1) | MAX | UNIT | |||
---|---|---|---|---|---|---|---|---|
VIT+ | Positive-going input threshold voltage | VO = 2.7 V, | IO = –0.4 mA | 0.2 | V | |||
VIT– | Negative-going input threshold voltage | VO = 0.5 V, | IO = 8 mA | –0.2(2) | V | |||
Vhys | Hysteresis voltage (VIT+– VIT–) | 60 | mV | |||||
VIK | Enable-input clamp voltage | II = –18 mA | –1.5 | V | ||||
VOH | High-level output voltage | VID = 200 mV, | IOH = –400 μA, | See Figure 6-6 | 2.7 | V | ||
VOL | Low-level output voltage | VID = –200 mV, | IOL = 8 mA, | See Figure 6-6 | 0.45 | V | ||
IOZ | High-impedance-state output current | VO = 0.4 V to 2.4 V | ±20 | μA | ||||
II | Line input current | Other input = 0 V(3) | VI = 12 V | 1 | mA | |||
VI = –7 V | –0.8 | |||||||
IIH | High-level enable-input current | VIH = 2.7 V | 20 | mA | ||||
IIL | Low-level enable-input current | VIL = 0.4 V | –100 | mA | ||||
ri | Input resistance | 12 | kΩ | |||||
IOS | Short-circuit output current | VID = 200 mV, | VO = 0 | –15 | –85 | mA | ||
ICC | Supply current | No load | Receiver outputs
enabled, Driver inputs disabled |
19 | 30 | mA | ||
Outputs disabled | 19 | 26 |