JAJSNO5 December   2023 TAC5242

ADVANCE INFORMATION  

  1.   1
  2. 1 特長
  3. 2 アプリケーション
  4. 3 概要
  5. 4 Device Comparison Table
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements: TDM, I2S or LJ Interface
    7. 6.7 Switching Characteristics: TDM, I2S or LJ Interface
  8. 7 Parameter Measurement Information
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Hardware Control
      2. 8.3.2 Audio Serial Interfaces
        1. 8.3.2.1 Time Division Multiplexed Audio (TDM) Interface
        2. 8.3.2.2 Inter IC Sound (I2S) Interface
      3. 8.3.3 Phase-Locked Loop (PLL) and Clock Generation
      4. 8.3.4 Analog Input Output Configurations
      5. 8.3.5 Reference Voltage
      6. 8.3.6 ADC Signal-Chain
        1. 8.3.6.1 Digital High-Pass Filter
        2. 8.3.6.2 Configurable Digital Decimation Filters
          1. 8.3.6.2.1 Linear Phase Filters
            1. 8.3.6.2.1.1 Sampling Rate: 16 kHz or 14.7 kHz
            2. 8.3.6.2.1.2 Sampling Rate: 24 kHz or 22.05 kHz
            3. 8.3.6.2.1.3 Sampling Rate: 32 kHz or 29.4 kHz
            4. 8.3.6.2.1.4 Sampling Rate: 48 kHz or 44.1 kHz
            5. 8.3.6.2.1.5 Sampling Rate: 96 kHz or 88.2 kHz
      7. 8.3.7 DAC Signal-Chain
        1. 8.3.7.1 Configurable Digital Interpolation Filters
          1. 8.3.7.1.1 Linear Phase Filters
            1. 8.3.7.1.1.1 Sampling Rate: 16 kHz or 14.7 kHz
            2. 8.3.7.1.1.2 Sampling Rate: 24 kHz or 22.05 kHz
            3. 8.3.7.1.1.3 Sampling Rate: 32 kHz or 29.4 kHz
            4. 8.3.7.1.1.4 Sampling Rate: 48 kHz or 44.1 kHz
            5. 8.3.7.1.1.5 Sampling Rate: 96 kHz or 88.2 kHz
            6. 8.3.7.1.1.6 Sampling Rate: 384 kHz or 352.8 kHz
    4. 8.4 Device Functional Modes
      1. 8.4.1 Active Mode
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Application
      2. 9.2.2 Design Requirements
      3. 9.2.3 Detailed Design Procedure
  11. 10Power Supply Recommendations
  12. 11Device and Documentation Support
    1. 11.1 Documentation Support
      1. 11.1.1 Related Documentation
    2. 11.2 ドキュメントの更新通知を受け取る方法
    3. 11.3 サポート・リソース
    4. 11.4 Trademarks
    5. 11.5 静電気放電に関する注意事項
    6. 11.6 用語集
  13. 12Revision History
  14. 13Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

6.7 Switching Characteristics: TDM, I2S or LJ Interface

at TA = 25°C, IOVDD = 3.3 V or 1.8 V and 20-pF load on all outputs (unless otherwise noted); see TBD for timing diagram
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
td(SDOUT-BCLK) BCLK to SDOUT delay 50% of BCLK to 50% of SDOUT, IOVDD = 1.8 V 18 ns
50% of BCLK to 50% of SDOUT, IOVDD = 3.3 V 14
td(SDOUT-FSYNC) FSYNC to SDOUT delay in TDM or LJ mode (for MSB data with TX_OFFSET = 0) 50% of FSYNC to 50% of SDOUT, IOVDD = 1.8 V 18 ns
50% of FSYNC to 50% of SDOUT, IOVDD = 3.3 V 14
f(BCLK) BCLK output clock frequency; master mode (1) 24.576 MHz
tH(BCLK) BCLK high pulse duration; master mode IOVDD = 1.8 V 14 ns
IOVDD = 3.3 V 14
tL(BCLK) BCLK low pulse duration; master mode IOVDD = 1.8 V 14 ns
IOVDD = 3.3 V 14
td(FSYNC) BCLK to FSYNC delay; master mode 50% of BCLK to 50% of FSYNC, IOVDD = 1.8 V 18 ns
50% of BCLK to 50% of FSYNC, IOVDD = 3.3 V 14
tr(BCLK) BCLK rise time; master mode 10% - 90% rise time, IOVDD = 1.8 V 10 ns
10% - 90% rise time, IOVDD = 3.3 V 10
tf(BCLK) BCLK fall time; master mode 90% - 10% fall time, IOVDD = 1.8 V 8 ns
90% - 10% fall time, IOVDD = 3.3 V 8
(1) The BCLK output clock frequency must be lower than 18.5 MHz (to meet the timing specifications), if the SDOUT data line is latched on the opposite BCLK edge polarity than the edge used by the device to transmit SDOUT data.