SLAAEN7A September   2024  – August 2025 MSPM0C1105 , MSPM0C1106 , MSPM0G1507 , MSPM0G1518 , MSPM0G1519 , MSPM0G3105 , MSPM0G3105-Q1 , MSPM0G3106 , MSPM0G3106-Q1 , MSPM0G3107 , MSPM0G3107-Q1 , MSPM0G3505 , MSPM0G3505-Q1 , MSPM0G3506 , MSPM0G3506-Q1 , MSPM0G3507 , MSPM0G3507-Q1 , MSPM0G3518 , MSPM0G3518-Q1 , MSPM0G3519 , MSPM0G3519-Q1 , MSPM0H3216 , MSPM0L1105 , MSPM0L1106 , MSPM0L1116 , MSPM0L1117 , MSPM0L1227 , MSPM0L1227-Q1 , MSPM0L1228 , MSPM0L1228-Q1 , MSPM0L1303 , MSPM0L1304 , MSPM0L1304-Q1 , MSPM0L1305 , MSPM0L1305-Q1 , MSPM0L1306 , MSPM0L1306-Q1 , MSPM0L1343 , MSPM0L1344 , MSPM0L1345 , MSPM0L1346 , MSPM0L2227 , MSPM0L2227-Q1 , MSPM0L2228 , MSPM0L2228-Q1

 

  1.   1
  2. 1 Description
  3. 2 Required Peripherals
  4. 3 Design Steps
  5. 4 Design Considerations
  6. 5 Software Flow Chart
  7. 6 Device Configuration
  8. 7 Application Code
  9. 8 Additional Resources
  10. 9 E2E
  11. 10Revision History
  12. 11Trademarks

3 Design Steps

  1. Set COMP peripheral instance, TIMER - Compare instance, TIMER instance, and pin out to desired device pins in SysConfig.
  2. Set COMP voltage in SysConfig.
  3. Set TIMER - Compare clock speed in SysConfig. Default is 4MHz.
  4. Set TIMER clock speed in SysConfig. Default is 32,768Hz.
  5. Define desired frequency range.
  6. Define the capture period based on desired frequency range.
  7. Set TIMER - Compare Number of Edges to Detect in SysConfig. Also define MAX_COMPARE_COUNT in code. (Optional)