SLLU265C March   2018  – April 2024 TUSB1044

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  6. 2Hardware
    1. 2.1 TUSB1044EVM
    2. 2.2 TUSB1044EVM Configuration
      1. 2.2.1 TUSB1044 EVM Default Jumper and Switch Configuration
      2. 2.2.2 TUSB1044 EQ Control
      3. 2.2.3 Power
  7. 3Hardware Design Files
    1. 3.1 TUSB1044EVM Schematics
    2. 3.2 Bill of Materials
  8. 4Additional Information
    1. 4.1 Trademarks
  9. 5Revision History

5 Revision History

Changes from Revision B (August 2018) to Revision C (April 2024)

  • Added header setting (J9) to TUSB1044 Configuration Pins tableGo
  • Added warning against using VBUS voltage greater than 5V and added a workaround for the issueGo
  • Changed schematic imagesGo
  • Updated U2 part name in TUSB1044 Bill of Materials tableGo

Changes from Revision A (April 2018) to Revision B (August 2018)

  • Deleted TUSB212 support throughout the document.Go

Changes from Revision * (March 2018) to Revision A (April 2018)

  • Added TUSB212 support throughout the document.Go
  • Changed TUSB1044 EVM Image Go
  • Added a note and Figure 3-3 and Figure 3-4 .Go
  • Changed schematic imagesGo
  • Changed TUSB1044 Bill of Materials tableGo